6 replies to this topic

[Cali_KR]

Posting this for a friend. A little about Kevin, he runs a high end motorsports shop, so the man knows his way around with a wrench. This is his personal car, and it is built right. Contact Kevin directly for specifics.  Check out the extensive list of mods... There are more than a few TS members here that can vouch for Kevin and the work he does...


I am selling the 2008 Bullitt Mustang #663 of 7700 made for the 2008-2009 model year . The car currently has 6,400+ miles on it. The following is a list of add-on parts ;


BODY

Agent 47 Lower Grille

SHR Lower Grille Inserts

8” Black Shorty Antenna

68 Style Rear Upper Side Louvers

Aluminum Trimmed Rear Medallion

SR Black Taillight Trim



TIRES AND WHEELS

18”x9” Shelby Torque Thrust M in Black (FRONT) with 255/45-18 Yokohama Advan Sport Radial Tires

18”x10” Shelby Torque Thrust M in Black (REAR) with 285/40-18 Yokohama Advan Sport Radial Tires

Custom Made “BULLITT” Center Caps and Valve Stem Caps



SUSPENSION AND BRAKES

H&R Street Performance Coilover Conversion

Maximum Motorsports Adjustable Caster/Camber Plates

BMR Fabrication Rear Lower Boxed Control Arms and Relocation Brackets

BMR Fabrication Rear Upper Adjustable 3rd Link and HD Mount Bracket

BMR Fabrication Panard Bar Relocation Bracket and HD Boxed Panard Bar Support Arm

Hotchkis Adjustable Panard Bar

Hotchkis 1.5” Adjustable Front Sway Bar

Hotchkis 1.0” Adjustable Rear Sway Bar

Power Slot Front and Rear Gas Slotted Rotors

HAWK HPS Performance Front and Rear Brake Pads

Agent 47 Front Brake Ducting Kit



DRIVELINE

BBK Aluminum/SFI-Rated Power Pulley Set

STEEDA Carbon Fiber CAI Elbow Inlet

Prothane Aluminum/Polyurethane Motor Mounts

Fidanza Aluminum Flywheel

Coast Driveline 3.5” One-Piece Aluminum Driveshaft

HURST Competition Plus Shifter

Moser Low Profile Aluminum Differential Girdle/Cover



ENGINE COMPARTMENT

Midwest Auto Gear Radiator Support Cover Extensions

DRAKE Aluminum Windshield Washer Tank Cap

MOROSO Aluminum Coolant Expansion Tank

CPC Ribbed Fuse Box Cover

FRPP Ribbed Intake Manifold Plenum Cover

FRPP Chrome Valve Covers

Kirban Performance Engine Oil Cap Chrome Trim Ring

UPR Billet Aluminum Brake Master Cylinder Cap

DRAKE Aluminum Battery Hold Down Bracket Kit

SHR Hood Support Struts



INTERIOR

DRAKE Satin Door Lock Pin Set

“BULLITT” Power Plug Cover

“BULLITT” Engraved Center Console Billet Aluminum Cup Holder Trim Panel


The color of the car is Dark Highland Green with a Dark Charcoal Interior and is registered in the International Mustang Bullitt Owners Club Registry. Chassis Dyno results showed 335RWHP and 354LBS RWT . Selling Price is $35,900 USD.


Kevin Patten

Performance Art/ General Manager

(408) 848-6325

(408) 848-6349 fax

www.performanceartonline.com

5755-B Rossi Lane

Gilroy, CA 95020

Attached Files

•  Bullitt.jpg   100.64K   219 downloads

Edited by Cali_KR, 09 March 2010 - 08:20 PM.

[Cali_KR]

Cali_KR, on 09 March 2010 - 08:19 PM, said:

Posting this for a friend. A little about Kevin, he runs a high end motorsports shop, so the man knows his way around with a wrench. This is his personal car, and it is built right. Contact Kevin directly for specifics.  Check out the extensive list of mods... There are more than a few TS members here that can vouch for Kevin and the work he does...


I am selling the 2008 Bullitt Mustang #663 of 7700 made for the 2008-2009 model year . The car currently has 6,400+ miles on it. The following is a list of add-on parts ;


BODY

Agent 47 Lower Grille

SHR Lower Grille Inserts

8” Black Shorty Antenna

68 Style Rear Upper Side Louvers

Aluminum Trimmed Rear Medallion

SR Black Taillight Trim



TIRES AND WHEELS

18”x9” Shelby Torque Thrust M in Black (FRONT) with 255/45-18 Yokohama Advan Sport Radial Tires

18”x10” Shelby Torque Thrust M in Black (REAR) with 285/40-18 Yokohama Advan Sport Radial Tires

Custom Made “BULLITT” Center Caps and Valve Stem Caps



SUSPENSION AND BRAKES

H&R Street Performance Coilover Conversion

Maximum Motorsports Adjustable Caster/Camber Plates

BMR Fabrication Rear Lower Boxed Control Arms and Relocation Brackets

BMR Fabrication Rear Upper Adjustable 3rd Link and HD Mount Bracket

BMR Fabrication Panard Bar Relocation Bracket and HD Boxed Panard Bar Support Arm

Hotchkis Adjustable Panard Bar

Hotchkis 1.5” Adjustable Front Sway Bar

Hotchkis 1.0” Adjustable Rear Sway Bar

Power Slot Front and Rear Gas Slotted Rotors

HAWK HPS Performance Front and Rear Brake Pads

Agent 47 Front Brake Ducting Kit



DRIVELINE

BBK Aluminum/SFI-Rated Power Pulley Set

STEEDA Carbon Fiber CAI Elbow Inlet

Prothane Aluminum/Polyurethane Motor Mounts

Fidanza Aluminum Flywheel

Coast Driveline 3.5” One-Piece Aluminum Driveshaft

HURST Competition Plus Shifter

Moser Low Profile Aluminum Differential Girdle/Cover



ENGINE COMPARTMENT

Midwest Auto Gear Radiator Support Cover Extensions

DRAKE Aluminum Windshield Washer Tank Cap

MOROSO Aluminum Coolant Expansion Tank

CPC Ribbed Fuse Box Cover

FRPP Ribbed Intake Manifold Plenum Cover

FRPP Chrome Valve Covers

Kirban Performance Engine Oil Cap Chrome Trim Ring

UPR Billet Aluminum Brake Master Cylinder Cap

DRAKE Aluminum Battery Hold Down Bracket Kit

SHR Hood Support Struts



INTERIOR

DRAKE Satin Door Lock Pin Set

“BULLITT” Power Plug Cover

“BULLITT” Engraved Center Console Billet Aluminum Cup Holder Trim Panel


The color of the car is Dark Highland Green with a Dark Charcoal Interior and is registered in the International Mustang Bullitt Owners Club Registry. Chassis Dyno results showed 335RWHP and 354LBS RWT . Selling Price is $35,900 USD.


Kevin Patten

Performance Art/ General Manager

(408) 848-6325

(408) 848-6349 fax

www.performanceartonline.com

5755-B Rossi Lane

Gilroy, CA 95020

Bump

[sportscars]

I love the Bullitt look! Wish I had the cash for that.

[Cali_KR]

Cali_KR, on 09 March 2010 - 08:19 PM, said:

Posting this for a friend. A little about Kevin, he runs a high end motorsports shop, so the man knows his way around with a wrench. This is his personal car, and it is built right. Contact Kevin directly for specifics.  Check out the extensive list of mods... There are more than a few TS members here that can vouch for Kevin and the work he does...


I am selling the 2008 Bullitt Mustang #663 of 7700 made for the 2008-2009 model year . The car currently has 6,400+ miles on it. The following is a list of add-on parts ;


BODY

Agent 47 Lower Grille

SHR Lower Grille Inserts

8” Black Shorty Antenna

68 Style Rear Upper Side Louvers

Aluminum Trimmed Rear Medallion

SR Black Taillight Trim



TIRES AND WHEELS

18”x9” Shelby Torque Thrust M in Black (FRONT) with 255/45-18 Yokohama Advan Sport Radial Tires

18”x10” Shelby Torque Thrust M in Black (REAR) with 285/40-18 Yokohama Advan Sport Radial Tires

Custom Made “BULLITT” Center Caps and Valve Stem Caps



SUSPENSION AND BRAKES

H&R Street Performance Coilover Conversion

Maximum Motorsports Adjustable Caster/Camber Plates

BMR Fabrication Rear Lower Boxed Control Arms and Relocation Brackets

BMR Fabrication Rear Upper Adjustable 3rd Link and HD Mount Bracket

BMR Fabrication Panard Bar Relocation Bracket and HD Boxed Panard Bar Support Arm

Hotchkis Adjustable Panard Bar

Hotchkis 1.5” Adjustable Front Sway Bar

Hotchkis 1.0” Adjustable Rear Sway Bar

Power Slot Front and Rear Gas Slotted Rotors

HAWK HPS Performance Front and Rear Brake Pads

Agent 47 Front Brake Ducting Kit



DRIVELINE

BBK Aluminum/SFI-Rated Power Pulley Set

STEEDA Carbon Fiber CAI Elbow Inlet

Prothane Aluminum/Polyurethane Motor Mounts

Fidanza Aluminum Flywheel

Coast Driveline 3.5” One-Piece Aluminum Driveshaft

HURST Competition Plus Shifter

Moser Low Profile Aluminum Differential Girdle/Cover



ENGINE COMPARTMENT

Midwest Auto Gear Radiator Support Cover Extensions

DRAKE Aluminum Windshield Washer Tank Cap

MOROSO Aluminum Coolant Expansion Tank

CPC Ribbed Fuse Box Cover

FRPP Ribbed Intake Manifold Plenum Cover

FRPP Chrome Valve Covers

Kirban Performance Engine Oil Cap Chrome Trim Ring

UPR Billet Aluminum Brake Master Cylinder Cap

DRAKE Aluminum Battery Hold Down Bracket Kit

SHR Hood Support Struts



INTERIOR

DRAKE Satin Door Lock Pin Set

“BULLITT” Power Plug Cover

“BULLITT” Engraved Center Console Billet Aluminum Cup Holder Trim Panel


The color of the car is Dark Highland Green with a Dark Charcoal Interior and is registered in the International Mustang Bullitt Owners Club Registry. Chassis Dyno results showed 335RWHP and 354LBS RWT . Selling Price is $35,900 USD.


Kevin Patten

Performance Art/ General Manager

(408) 848-6325

(408) 848-6349 fax

www.performanceartonline.com

5755-B Rossi Lane

Gilroy, CA 95020

BUMP

[Cali_KR]

Bump time

[Cali_KR]

SOLD, (traded in actually)

Edited by Cali_KR, 02 October 2010 - 03:55 PM.

[Albino500]

The new owner of this car (my old Bullitt ) just won 1st place in the 64 -1/2 to 2011 Modified Class at the MCA National ( judged ) Car Show in Concord this past weekend. I knew I should of kept that car - oh well . I sure do miss it - it was a fun car to drive !