Any other NM Shelby's out there?
1
New Mexico Shelby's
Started by
NMAv
, Apr 08 2011 05:33 AM
13 replies to this topic
#1 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 08 April 2011 - 05:33 AM
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#2 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 31 May 2011 - 07:04 PM
NMAv, on 08 April 2011 - 05:33 AM, said:
Any other NM Shelby's out there?
Anyone .... My wife says we may have to move to Colorado if we can't find a Shelby group here in NM. I want to have a mod party .... but right now I would be the only one attending and I make it a practice to do mods on others cars first, work out the bugs that way ....
So NM owners come on and step up to the plate...
Otherwise, is there a group in Co Springs? I see a lot of individual CS posters but not sure if you ever get together as a group.
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#3 OFFLINE
08sgt1042
-
- Members
-
- 516 posts
- Joined 07-May 08
Team Shelby Member
- Gender:Male
- Region:Mountain
- Vehicle:Cobra
Posted 31 May 2011 - 08:07 PM
NMAv, on 31 May 2011 - 07:04 PM, said:
Anyone .... My wife says we may have to move to Colorado if we can't find a Shelby group here in NM. I want to have a mod party .... but right now I would be the only one attending and I make it a practice to do mods on others cars first, work out the bugs that way ....
So NM owners come on and step up to the plate...
Otherwise, is there a group in Co Springs? I see a lot of individual CS posters but not sure if you ever get together as a group.
So NM owners come on and step up to the plate...
Otherwise, is there a group in Co Springs? I see a lot of individual CS posters but not sure if you ever get together as a group.
Check out the CSBC web site and you will get intouch with some folks out of Co Spgs....
2008 Vista Blue Silver stripes SGT1042
5 speed
Charcol Interior
Anti theft
HID
Shaker 500
Shelby GT dead pedal
Berg Faux Gas Cap
GT Spoiler
1/4 window flush louvers
Shelby Headrest covers
Lower Chrome Grill
Shelby Billet Engine caps
Sequenttial Turn signals
Stillen Cross Drilled Slotted Rotors
HPS Street Pads
MTM Custom Shifter Knob
Chrome Ford Racing Valve Covers
Ford Racing Shorty Headers
Pypes axleback pype bombs
Chrome CS40 20X9 - 20X10
Nitto 555's
(SOME DAY A POLISHED S/C)
5 speed
Charcol Interior
Anti theft
HID
Shaker 500
Shelby GT dead pedal
Berg Faux Gas Cap
GT Spoiler
1/4 window flush louvers
Shelby Headrest covers
Lower Chrome Grill
Shelby Billet Engine caps
Sequenttial Turn signals
Stillen Cross Drilled Slotted Rotors
HPS Street Pads
MTM Custom Shifter Knob
Chrome Ford Racing Valve Covers
Ford Racing Shorty Headers
Pypes axleback pype bombs
Chrome CS40 20X9 - 20X10
Nitto 555's
(SOME DAY A POLISHED S/C)
#4 OFFLINE
tradde
-
- Team Shelby Club Member
-
- 36 posts
- Joined 23-December 10
Team Shelby New Member
- Gender:Male
- Region:Northeast
- Vehicle:GT500
Posted 05 June 2011 - 06:45 PM
NMAv, on 31 May 2011 - 07:04 PM, said:
Anyone .... My wife says we may have to move to Colorado if we can't find a Shelby group here in NM. I want to have a mod party .... but right now I would be the only one attending and I make it a practice to do mods on others cars first, work out the bugs that way ....
So NM owners come on and step up to the plate...
Otherwise, is there a group in Co Springs? I see a lot of individual CS posters but not sure if you ever get together as a group.
So NM owners come on and step up to the plate...
Otherwise, is there a group in Co Springs? I see a lot of individual CS posters but not sure if you ever get together as a group.
Sorry, I hadn't noticed this forum. I live in Las Cruces, NM. I too would like to find other interested in Shelby's in this state.
2007 Shelby GT500 convertible (black) stripe delete
JLT CAI with tune
SLP axlebacks
MGW shifter
Soon to be added:
2.55 pulley with tune
JLT CAI with tune
SLP axlebacks
MGW shifter
Soon to be added:
2.55 pulley with tune
#5 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 03 October 2011 - 09:31 AM
OK NM Shelby owners, drop me a message to get added to the mailing list. Now that the kids are back in school and everyone is back in a routine, I'm going to try and organize some sort of get together. Maybe over at the Owl Cafe where we can kick tires, go have a beer, plan what or if anyone would like to setup some road racing time or plan to go to the strip for bragging rights etc, or maybe some group mods.
NMAv
jjsadmin@comcast.net
NMAv
jjsadmin@comcast.net
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#6 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 03 October 2011 - 09:31 AM
OK NM Shelby owners, drop me a message to get added to the mailing list. Now that the kids are back in school and everyone is back in a routine, I'm going to try and organize some sort of get together. Maybe over at the Owl Cafe where we can kick tires, go have a beer, plan what or if anyone would like to setup some road racing time or plan to go to the strip for bragging rights etc, or maybe some group mods.
NMAv
jjsadmin@comcast.net
NMAv
jjsadmin@comcast.net
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#7 OFFLINE
428cobra
-
- Team Shelby Club Member
-
- 6 posts
- Joined 10-January 11
68 & 69 GT 500 Verts
- Gender:Male
- Region:Mountain
- Vehicle:GT500
Posted 29 May 2012 - 03:08 PM
The Rio Grande Mustang Club just hosted their 30th anniversary show at the Marriot Pyramid Hotel in ABQ. There were several Shelbys, both new and vintage. Contacts are;
Frank McMullan, (505) 294-7902, f.mcmullan@q.com
Wally Short, 505-292-2110, shortstang@integrity.com
c;\users\208017849\My%20Picture\Personal\68%20Shelby%20GT500\GT500Conv.jpeg
#8 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 31 May 2012 - 04:50 AM
Ah man, that is 5 minutes from my house. Sorry I missed it.
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#9 OFFLINE
2010KonaBlueGT
-
- Members
-
- 5,961 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 31 May 2012 - 08:37 AM
08sgt1042, on 31 May 2011 - 08:07 PM, said:
Check out the CSBC web site and you will get intouch with some folks out of Co Spgs....
Shelby Mark is in Alburqurque.
I'm one of the Co. Springs CSBC contingent.
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#10 OFFLINE
2010KonaBlueGT
-
- Members
-
- 5,961 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 31 May 2012 - 08:38 AM
NMAv, on 08 April 2011 - 05:33 AM, said:
Any other NM Shelby's out there?
Are you in Santa Fe?
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#11 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 31 May 2012 - 08:55 AM
Albuquerque for one more day, then C Springs bound for a lifetime.
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#12 OFFLINE
2010KonaBlueGT
-
- Members
-
- 5,961 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 31 May 2012 - 09:03 AM
NMAv, on 31 May 2012 - 08:55 AM, said:
Albuquerque for one more day, then C Springs bound for a lifetime.
You're moving here? You find a house yet?
Look me up when you get settled in. "Blackout" (2012 Super Snake) is here too.
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#13 OFFLINE
NMAv
-
- Members
-
- 584 posts
- Joined 10-January 11
Team Shelby Member
- Gender:Male
- Region:Mountain
- Interests:hockey, family, weight lifting, cars
- Vehicle:GT500
Posted 31 May 2012 - 09:46 AM
Yes, we are all the way up Broadmoor Bluff. Got a good deal on a nice home. I'll drop you a note when we get settled in.
~ NMAv
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
2011 Shelby GT500 with SVTPP (Kona Blue)
Modifications in order of occurance: Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake * 2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera
Waiting to be installed: bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching: 1. Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.
Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune. Ultimate goal: Surpassed
#14 OFFLINE
2010KonaBlueGT
-
- Members
-
- 5,961 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 31 May 2012 - 10:30 AM
NMAv, on 31 May 2012 - 09:46 AM, said:
Yes, we are all the way up Broadmoor Bluff. Got a good deal on a nice home. I'll drop you a note when we get settled in.
You're fairly close to Blackout, very close to me.
I was looking to buy in Broadmoor Bluff's but my wive Veto'd that decision. Nice area.
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
