6 replies to this topic

[1967 GT500]

Anyone know where I can find a disc brake pressure control valve assembly, or a rebuild kit for one?  It is circled in red and on the upper left hand corner of the attached JPEG file.  Thanks!

Attached Files

•  brake manual page.JPG   107.21K   26 downloads

[1967 GT500]

Here is an actual picture of it.  Thanks

1967 GT500, on 26 April 2011 - 05:45 AM, said:

Anyone know where I can find a disc brake pressure control valve assembly, or a rebuild kit for one?  It is circled in red and on the upper left hand corner of the attached JPEG file.  Thanks!

Attached Files

•  Brake Pressure Control Valve Assembly.jpg   115.39K   18 downloads

[shelby001]

You might want to try TONY BRANDA they carry alot of Shelby parts or can refer you to someone that would have these.

[1967 GT500]

Thanks,  I already checked them and tons of other sites with no luck.  I e-mailed them, but am still waiting for a response.  It's almost as if this part doesn't exist.

shelby001, on 26 April 2011 - 06:27 AM, said:

You might want to try TONY BRANDA they carry alot of Shelby parts or can refer you to someone that would have these.

[1967 GT500]

Just ordered the following, from CJ Mustang.  Hopefully it is the right thing:

RESIDUAL PRESSURE VALVE 2LB FOR DISC BRAKES 1965-1973
Part Number: A0764
2lb. Residual Pressure Valve for 1965-1973 Mustangs with Disc Brakes.

These valves are used in a disc brake system. It's purpose is to act as an anti-siphon valve preventing the brake fluid from siphoning back into the master cylinder when the brake pedal is released. Available in a blue anodized or polished finish.

1967 GT500, on 26 April 2011 - 06:49 AM, said:

Thanks,  I already checked them and tons of other sites with no luck.  I e-mailed them, but am still waiting for a response.  It's almost as if this part doesn't exist.

[2009droptopshelby]

I've never seen this.  Where did the "brake manual page" come from?

Edited by 2009droptopshelby, 30 April 2011 - 07:18 PM.

[Nitro]

If you are trying to find an OEM replacement part that might prove to be difficult. If you are just looking for a part to do the job (residual valve) most all the racing brake companies sell them. Wilwood, lamb, etc.