Jump to content





Photo

I need 4 Gunmetal Gray Razors!


  • Please log in to reply
18 replies to this topic

#1 OFFLINE   1BAD500

1BAD500

    Team Shelby New Member

  • Members
  • Pip
  • 75 posts
  • Joined 10-June 07

Posted 22 January 2012 - 03:51 PM

I just damaged all 4 of my wheels by hitting something in the road!!!! Does anyone know where I can get 4 new wheels either in the Gunmetal gray or the Silver finish? Shelby says they are no longer available, and I have not been able to find any on the internet. Any help would be appreciated.

#2 OFFLINE   tcaramucci

tcaramucci

    07 Alloy GT500 #5365

  • Members
  • Pip
  • 228 posts
  • Joined 09-February 07
Garage View Garage

Posted 22 January 2012 - 04:39 PM

If you find any I need 1 in silver.

2007 Shelby GT500 Coupe

Born on 2-23-2007 - # 5365 of 8152 built and #228 of 338 in color

Alloy/Silver Stripes, Premium Interior, Shaker 1000


Interior Upgrades Include:

· Serialized Number Plate for the dash with Carroll Shelby’s Signature · Carroll Shelby’s Autographed Signature dash (airbag) · Shelby Floor Mats · Shelby

Center Gauge Kit (Boost, Oil Pressure, Fuel Pressure) · Arm Rest cover with Snake Logo · Aluminum Shelby Map Light Accent · Satin Door Lock knobs · Shelby

Pedal Covers · Shelby Dead Pedal · Shelby GT500 Illuminated Starter Button · Shelby Lighted Sill Plates · Shelby Cobra Headrest Cover


Exterior Upgrades Include:

· 40th Anniversary Badging · Shelby Super Snake Hood · Painted fiber rocker panels · Shelby GT500 billet hood pins · Shelby GT500 Super Snake Quarter

Window Scoops · Shelby Hood Strut Kit · Shelby GT500 Super Snake Side Scoops · Bangastang's GT500 Radiator Cover · Carbon Fiber Front Splitter · Carbon

Fiber Mirror Covers · Deck Lid SHELBY Letter Kit · Sequential Tail Lights · Front Brake Duct Kit · Shelby Anti-Wheel Hop Rear Control Arm Relocation Brackets

· Engine Dress Up kit – billet fluid caps, oil stick and fuse box cover Shelby Adjustable Panhard Bar


Performance Upgrades Include:

· Borla Cat Back Exhaust · Shelby/Eibach coil over suspension · Shelby Engine Strut Bar (GT500 SuperSnake) · BFG's 255/35/ 20 (front) 275/35/20 (rear)

· 20• Shelby/American Racing Razor wheels in special silver with Shelby center caps


#3 OFFLINE   msmap

msmap

    proud mom of a Wounded Warrior

  • Southern Plains Region
  • 5,447 posts
  • Joined 26-March 07
  • Region:Southern Plains
  • Interests:my family, my friends, my Shelby
Garage View Garage

Posted 22 January 2012 - 04:58 PM

try getting them repaired
Sherri

2007 Shelby GT500
CSM 07XL0417 (Bud's last)
#2215 of 2695 verts
#266 of 325 Performance White verts
ordered 3/27/07
built 4/17/07
home 4/27/2007

Other stablemates:
#1143 of 6381 SVT 2001 Lightnings
Oxford White
Born 2/21/01
#939 of 1000 1994 Cobra Indy Pace cars
Saddle on Red
Born on 4/15/94
1969 Mach 1
Indian Fire
Born on 1/20/69


If you don't stand behind our troops,
please feel free to stand in front of them.

#4 OFFLINE   MY500SS

MY500SS

    Team Shelby Addict

  • Pacific Coast Region
  • 22,954 posts
  • Joined 15-April 07
  • Region:Pacific Coast

Posted 22 January 2012 - 05:11 PM

OUCH, real sorry to hear. Not sure where to find but maybe SPP can give you a good lead.
Honored to have participated in the 2012 Shelby Run Europe.
2500 miles, 10 days, 8 countries.


Proud member of Team 40th - 07XL0273

2007 GT500SS CSM 07SS0134.
2007 GT50040th CSM 07XL0273.
1965 Mustang Coupe K Code.
1964 289 FIA Cobra CSX 7076.
1963 L76 Corvette.

Posted Image

#5 OFFLINE   Ford Fest

Ford Fest

    Team Shelby Member

  • Members
  • PipPip
  • 630 posts
  • Joined 08-October 11
  • Region:Northern Plains

Posted 22 January 2012 - 05:32 PM

Have you contacted American Racing? They still offer the Razor without Shelby stamp on line. Might be worth a call.

Good luck, keep us posted.

2007 Shelby GT500 40th Anniversary
Built July 2006 - Converted March 2009
FRPP TVS & CAI

Shelby Extreme-Plus Brake System
Short Throw Shifter

Proud member of Team 40th - CSM 07XL0298

th_IMG_5390.jpg


#6 OFFLINE   Ford Fest

Ford Fest

    Team Shelby Member

  • Members
  • PipPip
  • 630 posts
  • Joined 08-October 11
  • Region:Northern Plains

Posted 22 January 2012 - 06:00 PM

Might be worth looking in to

http://www.teamshelb...th-anniversary/

2007 Shelby GT500 40th Anniversary
Built July 2006 - Converted March 2009
FRPP TVS & CAI

Shelby Extreme-Plus Brake System
Short Throw Shifter

Proud member of Team 40th - CSM 07XL0298

th_IMG_5390.jpg


#7 OFFLINE   1BAD500

1BAD500

    Team Shelby New Member

  • Members
  • Pip
  • 75 posts
  • Joined 10-June 07

Posted 23 January 2012 - 05:40 AM

Thanks for the suggestions.

The wheels are damaged too badly to be repaired, SPP says they have been sold out since last summer, and the wheels online for American Racing only fit the GT and the V-6, they will not fit the GT500.

I am going to try to contact American Racing via phone today to see if they have something that is not listed.

#8 OFFLINE   Torch40

Torch40

    Charter Member Team 40th

  • Pacific Coast Region
  • 2,612 posts
  • Joined 18-October 07
  • Region:Pacific Coast
  • Interests:cannot be left blank

Posted 23 January 2012 - 06:18 AM

:camera:

2007 Torch Red GT500 40th completed 5/22/08
638 RWHP 581 Torque

4/06/11 Pick up 2011 GT350 # 50
624 HP Polished Supercharger, Watts Link, Shelby Brakes, Museum Delivery

Proud Member of Team 40th

DSC02050_2-1.jpgGT350PickupApril6th2011008-1.jpgGT350PickupApril6th2011017-1.jpgshelbybash020-1.jpg

217f3814-fd2e-449b-8016-bfce95db752a_zps


#9 OFFLINE   blkGT500nCA

blkGT500nCA

    Team Shelby Member

  • Members
  • PipPip
  • 2,194 posts
  • Joined 04-May 08

Posted 23 January 2012 - 10:17 AM

Did the wheel bend and crack, or is it just deep scratches?? If they're just scratches, they can be fixed and re-powder coated. Let me know if you need any help. Let's see some pics!
Posted Image

#10 OFFLINE   1BAD500

1BAD500

    Team Shelby New Member

  • Members
  • Pip
  • 75 posts
  • Joined 10-June 07

Posted 23 January 2012 - 03:34 PM

The right rear wheel is in about 8 pieces and the right front has a very large chunk out of it, so I don't imagine that those are repairable! The left side really doesn't look that bad, but since there was so much damage to the other side, I am afraid of internal hairline cracks...etc. Just wouldn't feel safe anymore.

I did have someone tell me that the V-8 Razor wheels which have a +30mm spacing would work if you use a +6mm spacer. The GT 500 rims are +24mm.

Has anyone tried this, or know if all of the other offsets are the same?

#11 OFFLINE   Slabo

Slabo

    Team Shelby Member

  • Pacific Northwest Region
  • 1,925 posts
  • Joined 08-August 08
  • Region:Pacific Northwest
Garage View Garage

Posted 24 January 2012 - 08:38 PM

Dang, what did you hit?
Proud member of Team 40th - 07XL0381

2007 GT500 Vert purchased 8/12/08, #828 of 859 Ebony, Nav, Sirius, assembled on 6/11/07
Reborn 9/14/09 at SAI Vegas - 40th Anniv. package w/ Interior Upgrade, 605HP TVS, 3.73's, Shelby Shifter, Cooling Package and Extreme Brakes.
Many additional mods.

Posted Image Posted Image

#12 OFFLINE   blkGT500nCA

blkGT500nCA

    Team Shelby Member

  • Members
  • PipPip
  • 2,194 posts
  • Joined 04-May 08

Posted 25 January 2012 - 09:09 AM

Dang, what did you hit?


No kidding. The wheel is in 8 pieces?!?!? There might be more damage there than a wheel.
Posted Image

#13 OFFLINE   1BAD500

1BAD500

    Team Shelby New Member

  • Members
  • Pip
  • 75 posts
  • Joined 10-June 07

Posted 25 January 2012 - 05:08 PM

Yes, the wheel is literally in about 8 pieces! It is not an exageration. And yes, unfortunately it did do a lot more damage when it came apart! I would post a pic orf the wheel but I am not real sure how to do it.

#14 OFFLINE   SGT0128

SGT0128

    Team Shelby Member

  • Southern Plains Region
  • 1,520 posts
  • Joined 12-October 09
  • Region:Southern Plains
  • Interests:Anything with wheels, any sport with a ball, anything that fires a projectile.

Posted 25 January 2012 - 07:29 PM

Yes, the wheel is literally in about 8 pieces! It is not an exageration. And yes, unfortunately it did do a lot more damage when it came apart! I would post a pic orf the wheel but I am not real sure how to do it.


If you want to post lots of big photos and not exceed the site limit and help keep the CPU usage down and conserve the site Bytes, then follow these few simple instructions to get going on Photo bucket so you can post as many photos as your heart desires.

1st. Go to this link and set up a account. It is quick and easy.

http://photobucket.com/

2nd.
Go to the area called "Albums and Upload".

3rd.
Click on the "browse" button and find the photo on your computer that you want to download and then click on that photo and then click "Upload".

4th.
The photo will then "Upload" and pop into the bottom of the page. Scroll down there and click a check mark in the box telling it that you have chosen it.

5th.
Then click the button at the bottom of the page that says " Generate HTML and IMG Code".

6th.
Then you will see the photo codes in 2 areas that you can use. one is "IMG Thumbnails for message boards" and the other one is "IMG images for message boards". Highlight one of the codes in those boxs and use your mouse to do the copy function. You can do one at a time or as many as you want.

7th.
Go to your Team Shelby post and paste the IMG code into the big white box that you would normally type a post into.

That's it. After you do it once or twice, you will have it down quick. Note that the Thumbnail selection is going to give you a smaller photo and the Image selection will give you a big photo in your post. If you need any help, let me know and I will give you a hand.

This will really help our site run quicker and faster if you are a photo poster lover like me.

I didnt create this, someone eles here on TS, just passing it on.
Posted Image


Dwain Jones
Pflugerville, Texas
Shelbygtc0128@gmail.com
www.centexsvt.com

"The US Constitution should be used more as a sword for the victims rather than a shield for the guilty" Jack McCoy

2008 Shelby GT-C
CSM 08SGT0128

#15 OFFLINE   bigmac70

bigmac70

    Team Shelby New Member

  • Members
  • Pip
  • 8 posts
  • Joined 11-July 11
  • Region:Southern Plains

Posted 28 January 2012 - 09:38 PM

Try American Muscle for the newly released SHELBY Razors. They do say they DO NOT fit the GT500 but I purchased one 20X9 first for fitment reasons after putting pencil to paper concerning the backspacing/offset etc. They do clear the caliper but I ordered a hubcentric 3mm spacer for a little clearance. The 30mm +offset should actually work out well on our cars and I ordered 20X10 for the rear. Someone on our local Craigslist had a set of four with 255 tires but I thought they were overpriced considering they all needed repair. A wheel repair place I know siad they were difficult to repair because of the fake rivets when it comes time to powdercoat them (after repair). Anyway, feel free to contact me with any questions; the wheels look great, I bought the anthracite sp? versions. Thanks, Dave

#16 OFFLINE   SteelTownStang

SteelTownStang

    SteelTownStang

  • Members
  • PipPip
  • 1,280 posts
  • Joined 13-August 09

Posted 29 January 2012 - 05:31 AM

Too bad about your Razors. I just sold my 08 and have 4 Shelby "Chrome" Razors/w new Nittos and TPMS in
Pristine condition about to go on sale...
NEW CAR: 2012 GT500 Black w/Grabber Blue Stripes
RECENTLY SOLD CAR: 2008 GT500 Red w/White Stripes
MODS: VMP 2.59 Pulley & Tune, JLT Induction Tube, Airaid Blue SynthaMax Filter, Painted STB Brace, FRPP Springs, BRM Adjustable Panhard Bar, Borla S-Type Exhaust, 20% Window Tint, Speed Dawg Shifter, NXT Hood Lifts, CDC Dead Pedal, Kicker Speaker/Sub Upgrade, Cobra Floor Mats, 2013 Splitter, SVTPP Wheels & Tires, Cervini Tinted Taillight, V-Led 5K LED Fog Lights, etc.



Posted Image


#17 OFFLINE   txcobra

txcobra

    Mustang Addict

  • Members
  • PipPip
  • 1,206 posts
  • Joined 26-December 06

Posted 04 February 2012 - 04:55 PM

I have a set of the American Racing razors in silver. Used with a couple of minor blemishes and they do not have Shelby stamped on the front but they are identical in every way. American racing produced some with and some without the Shelby letters stamped on them. These were the only silvers I could find anywhere and I searched and searched. I had chrome and thought they were too blingy so I wanted silver. I've since sold my 40th sadly, so I do not need them. I'd let them go cheap if anyone is interested.
Sigpic.jpg

Current Stable:Stable:
'69 Mach 1 - Royal Maroon, 428 CJ, Shaker Hood, C6, Air, PS, PB, etc
'08 Shelby GT500KR - Torch Red, 40th Anniversary - CSM 08KR0398
'14 F150 RAPTOR - SCrew, Race Red, Every Option
'13 Shelby GT500 - Candy red, black stripes, every option but cover

http://www.austinareastangs.com

#18 OFFLINE   Ford Fest

Ford Fest

    Team Shelby Member

  • Members
  • PipPip
  • 630 posts
  • Joined 08-October 11
  • Region:Northern Plains

Posted 04 February 2012 - 05:03 PM

I have a set of the American Racing razors in silver. Used with a couple of minor blemishes and they do not have Shelby stamped on the front but they are identical in every way. American racing produced some with and some without the Shelby letters stamped on them. These were the only silvers I could find anywhere and I searched and searched. I had chrome and thought they were too blingy so I wanted silver. I've since sold my 40th sadly, so I do not need them. I'd let them go cheap if anyone is interested.


Sounds perfect for 1BAD500

2007 Shelby GT500 40th Anniversary
Built July 2006 - Converted March 2009
FRPP TVS & CAI

Shelby Extreme-Plus Brake System
Short Throw Shifter

Proud member of Team 40th - CSM 07XL0298

th_IMG_5390.jpg


#19 OFFLINE   1BAD500

1BAD500

    Team Shelby New Member

  • Members
  • Pip
  • 75 posts
  • Joined 10-June 07

Posted 10 February 2012 - 07:18 PM

Thanks for the offer on the silver razors, but I think I may have located a new set....Keeping my fingers crossed!
If they don't pan out, I will definately be contacting you.
If I was to buy some without the Shelby lettering, does anyone know if it could be engraved by someone with a CNC machine?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users