Sean Hyland Motors
Posted 27 February 2012 - 06:51 PM
Posted 27 February 2012 - 07:07 PM
Shelby 001 has been there and if I'm not mistaken knows a few of the guys. You may want to check with him..
2008 White V6 Convertible.
Posted 27 February 2012 - 08:27 PM
I'm going to get the GTSC conversion has anyone had it done at Sean Hyland Motors or had any work done there? I'd love to get it done at Shelby's but the distance from Ontario Canada makes the cost too high. Any feedback would be appreciated.
Good luck with your conversion: The GT/SC package makes for a GREAT car... balanced, powerful, and a rare bird. It was the best thing I've done to my car. Still a great comfortable everyday driver, but with extra MEAN under the "go pedal". 8 months later, still puts a smile on my face.
Vice President, Shelby Performance Parts
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
Posted 27 February 2012 - 08:34 PM
Posted 10 March 2012 - 04:21 AM
Posted 10 March 2012 - 04:26 AM
Posted 10 March 2012 - 05:26 AM
How far is TASCA in Rhode Island from you? It won't be a real GT/SC unless Shelby or TASCA does the work. You will not get an argument from me that others can do the work.
Sean Hyland is an authorized Shelby mod shop just like Tasca so it will still qualify to be a "real" Shelby
Posted 10 March 2012 - 07:21 AM
That's nice to know. When did this happen? I thought that all the Shelby Mod shops except TASCA "Went away".
They were authorized four or five years ago and have completed a few ss packages that I know of and I think there are a couple more in the works..
Posted 10 March 2012 - 09:43 AM
Posted 10 March 2012 - 11:18 AM
They are authorized for all Shelby conversions, talked to Sean a while back and making arrangements to have it done in May/June . I'm in Florida right now for the winter and will be back mid April. CAN'T WAIT!!!
I know SHM is authorized but a quick review of their web site only shows conversions for the GT 500, CS6, CS8 and Terlingua. No mention of the SGT.
Edited by bmezz, 10 March 2012 - 11:29 AM.
Posted 10 March 2012 - 12:36 PM
Edited by Rev Dennis, 10 March 2012 - 12:37 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users