Contact link, if you want to nudge/encourage them: http://jaegerbrother...x.php?m=contact
Email sent. No response yet.
Jump to content
Posted 15 March 2012 - 04:03 PM
Posted 15 March 2012 - 05:32 PM
Posted 15 March 2012 - 05:34 PM
I'll definitely buy a set for my 2011 if they become available----the roads in Pennsylvania right now are full of cinders and rock salt!!!!!!!!!!!
Posted 16 March 2012 - 07:07 AM
Posted 17 March 2012 - 02:33 AM
Ecrissman,I am located in NE,Pa----North of Scranton
Posted 17 March 2012 - 04:15 PM
Posted 20 March 2012 - 07:42 AM
Posted 20 March 2012 - 10:20 AM
I expect I should hear something soon. I will try to make a point to call. I dont feel right sending out the templates if they are going to make them. If they do not, thats another story.
Posted 23 March 2012 - 05:13 AM
Posted 23 March 2012 - 12:15 PM
I called and haven't heard anything back, so I will scan the template in and you can use it on whatever splash guard you like. I did use their regular mustang guard, ridculously easy install I used a Malco MV12 Andy Combination Snip for Vinyl Cutting because I had them and they cut vinyl like scissors cut paper, them just used some 220 grit to gently smooth the edges.
I will post the template here, to make it work print it out and size it so the mounting holes line up the the mounting holes in their guards, use a pencil to trace, snip, sand and install. It may be a day or so since I have to drag the scanner copier out.
Posted 23 March 2012 - 12:28 PM
Can you scan in PDF format?
I can so if you scan in .jpg, I can print and rescan it into PDF then repost. I'm just not sure if it will retain 100% scale.
Posted 25 March 2012 - 04:32 AM
Posted 26 March 2012 - 06:13 AM
Posted 16 April 2012 - 03:38 PM
Posted 17 April 2012 - 02:10 AM
Posted 17 April 2012 - 02:13 AM
Posted 17 April 2012 - 03:10 PM
Posted 17 April 2012 - 03:28 PM
Posted 19 April 2012 - 10:49 AM
Black 2012 Shelby GT500 SVTPP Coupe, VMP TVS, VMP big elbow, FRPP CJ 65mm throttle body, Shelby Dual Pass Heat Exchanger and Fans, Reische 170* Thermostat, MBRP headers, Aeroforce Gauges in SOS dual pillar pod, Cobra Jet 123mm CAI, Fore fuel rails, BMR upper and lower adjustable control arms, panhard rod.
Posted 19 April 2012 - 12:04 PM
Got an email from Jason Jaeger today to say these are now available
Posted 19 April 2012 - 02:46 PM
Got an email from Jason Jaeger today to say these are now available here - http://jaegerbrother...models_593.html
Ordered a set. Thanks for doing this Ecrissman!
Ditto. Nice that they responded!
Posted 19 April 2012 - 07:06 PM
Posted 19 April 2012 - 07:29 PM
Posted 20 April 2012 - 02:35 AM
Ordered mine tonight. Thanks Ecrissman for helping to make this possible! Now I need to figure out how to repair the pits that are already there.
Posted 20 April 2012 - 10:15 AM
Edited by Ecrissman, 20 April 2012 - 10:31 AM.
Posted 20 April 2012 - 11:35 AM
Posted 20 April 2012 - 11:40 AM
That looks great! I can't wait to get mine. They shipped them out today (Fast shipping!). I will probably replace the lower rocker panels (ground effects) at some stage since the leading part near the front wheel well looks like it got sand blasted. I think they are around $100 apiece from Ford. Shelby American has the carbon fiber ones at $472 apiece! Not sure if they are correct for a 2012 since they show for 2005-2009 mustangs.
Posted 20 April 2012 - 12:40 PM
0 members, 0 guests, 0 anonymous users