Jump to content





Photo

Front Splitter ffrom 2013


  • Please log in to reply
157 replies to this topic

#61 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 146 posts
  • Joined 04-February 12
  • Region:South Atlantic

Posted 05 June 2012 - 02:03 AM

I'm pretty sure all ot the '13s come with it. It just isn't installed by the factory due to ground clearance. It actually comes in 3 peices. The sides snap into the center.

#62 OFFLINE   Burning Blue Star IV

Burning Blue Star IV

    Team Shelby Member

  • Members
  • PipPip
  • 3,335 posts
  • Joined 14-June 09
  • Region:Northeast
  • Interests:Hockey, Music, Love, Astronomy,country roads, camping, great food, Wine, playing guitar, Sci-Fi & Computers

Posted 05 June 2012 - 04:01 AM

I'm pretty sure all ot the '13s come with it. It just isn't installed by the factory due to ground clearance. It actually comes in 3 peices. The sides snap into the center.

I thought it was just the ones with the optional cooling package. I could be wrong, but I was under that impression.
2010 Shelby GT500
Posted Image

#63 OFFLINE   Boidster

Boidster

    Shelby Amateur

  • Northern Plains Region
  • 256 posts
  • Joined 19-December 11
  • Region:Northern Plains

Posted 05 June 2012 - 07:07 AM

I'm still not clear on what this part is. On my '12 there is a black plastic lip piece under the front bumber. Does this mount under that piece or replace it?


Thank you for asking this question. I've been following along from Amigo's first post and just figured I was too stupid to understand what y'all were talking about. :fool:

Also, "bumber" is one of my favorite typos. It conjures an image of an especially soft, non-threatening impact point. A bumper might break your legs or throw you off the roadway, but a bumber will just gently nudge you aside.

Look at the pic in this link - you will see the extra piece, it finishes off the front end very nicely IMO. http://www.teamshelb...ost__p__1310165


AHA! That does look pretty nice. I'd have to modify my oil change ramps somehow to avoid scraping those.

Edited by Boidster, 05 June 2012 - 07:08 AM.

- 2012 GT500 in Performance White, stripe delete, SVTPP, nav, resonator delete, some under-hood bling
- 1967 Mustang 289 Vinyl-Top Coupe in Sauterne Gold, 50K miles, factory exterior, light performance upgrades
- You don't care about my other cars, past or present

#64 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 05 June 2012 - 07:53 AM

This now lists for $154.40 on ford parts...so it looks like it's available. I know I'll be picking up one.


I'm waiting for someone to fit one onto their pre-13 before I order mine!


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#65 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 05 June 2012 - 08:00 AM

other picture..


Mi Amigo,

You posted a pdf of a exploded view on the 2013 front assembly somewhere on TS. I can't locate it. Do you have it handy?

Apparently the pic of the front splitter in the associated thread is gone and the one that remains seems to show the '13 splitter being different from the earlier versions. It LOOKS like a splitter, with either a "spacer" or the splitter is extended down about 1/2" and then the extra piece that I want to add to mine.

The exploded view should clear the issue up for me.


Thanks,
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#66 OFFLINE   Crushinator

Crushinator

    Team Shelby New Member

  • Members
  • Pip
  • 341 posts
  • Joined 01-August 10
  • Region:Northeast

Posted 05 June 2012 - 10:02 AM

Hi Crushinator - The one in the picture that Amigo posted doesn't have the extra piece (not all 13's have it)..and it is just that, something that attaches to the splitter that you have. Look at the pic in this link - you will see the extra piece, it finishes off the front end very nicely IMO. http://www.teamshelb...ost__p__1310165


Ok, that clears it up! Thanks! That does look sweet. I just ordered mine through my local dealer. Said it could be here next week or next month. Hahaha
2012 Grabber Blue SVTPP
'13 2.3 TVS, VMP 2.4" pulley, JLT 127 w/ PowerStack Filter, 170 stat, Ford Racing 65MM T/B
Afco dual fan H/E, tune by Justin at VMP
672 RWHP 656 RWTQ

Posted Image

#67 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 05 June 2012 - 10:07 AM

Ok, that clears it up! Thanks! That does look sweet. I just ordered mine through my local dealer. Said it could be here next week or next month. Hahaha


Is it an entire new splitter or just the bottom portion/s?

Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#68 OFFLINE   Crushinator

Crushinator

    Team Shelby New Member

  • Members
  • Pip
  • 341 posts
  • Joined 01-August 10
  • Region:Northeast

Posted 05 June 2012 - 10:27 AM

Is it an entire new splitter or just the bottom portion/s?

Phill


It's just the bottom portion. Evidently it comes in 3 pieces and it attaches right to your existing splitter. Looks simple enough to install.
2012 Grabber Blue SVTPP
'13 2.3 TVS, VMP 2.4" pulley, JLT 127 w/ PowerStack Filter, 170 stat, Ford Racing 65MM T/B
Afco dual fan H/E, tune by Justin at VMP
672 RWHP 656 RWTQ

Posted Image

#69 OFFLINE   Burning Blue Star IV

Burning Blue Star IV

    Team Shelby Member

  • Members
  • PipPip
  • 3,335 posts
  • Joined 14-June 09
  • Region:Northeast
  • Interests:Hockey, Music, Love, Astronomy,country roads, camping, great food, Wine, playing guitar, Sci-Fi & Computers

Posted 05 June 2012 - 02:44 PM

Ok, that clears it up! Thanks! That does look sweet. I just ordered mine through my local dealer. Said it could be here next week or next month. Hahaha

Great Crushinator...how much did they quote you for a price? I'm getting really close to ordering the grilles, splitter and few other things. I have been trying to figure out what the exact parts belong behind the lower grille corner holes. It's hard to tell from the illustrations.
2010 Shelby GT500
Posted Image

#70 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 05 June 2012 - 02:56 PM

I have been trying to figure out what the exact parts belong behind the lower grille corner holes.


Please post that info when you get it!


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#71 OFFLINE   Crushinator

Crushinator

    Team Shelby New Member

  • Members
  • Pip
  • 341 posts
  • Joined 01-August 10
  • Region:Northeast

Posted 05 June 2012 - 03:12 PM

Great Crushinator...how much did they quote you for a price? I'm getting really close to ordering the grilles, splitter and few other things. I have been trying to figure out what the exact parts belong behind the lower grille corner holes. It's hard to tell from the illustrations.


The splitter was $154.20. I ordered it through my local SVT Ford dealership. I did take you guys' word for it that the front end is easy to take off so I ordered the grill pieces too. They were $360ish for both through Tousley.
I'm going to wait to get the grill peices to look at it and see if I can fabricate something to cover the corner holes.
2012 Grabber Blue SVTPP
'13 2.3 TVS, VMP 2.4" pulley, JLT 127 w/ PowerStack Filter, 170 stat, Ford Racing 65MM T/B
Afco dual fan H/E, tune by Justin at VMP
672 RWHP 656 RWTQ

Posted Image

#72 OFFLINE   69er-sagittarius

69er-sagittarius

    69er-sagittarius

  • Members
  • Pip
  • 90 posts
  • Joined 28-November 10
  • Region:European Union
  • Interests:Cars, Sports

Posted 06 June 2012 - 03:45 AM

It's just the bottom portion. Evidently it comes in 3 pieces and it attaches right to your existing splitter. Looks simple enough to install.


Did you make the installation of the spllitter already? Do you have some pics?

Before ordering I want to know if I would need additional hardware to fix it on the existing splitter or would the splitter be fixed with the existing hardware.

Thanks in advance.
2011 Shelby GT500 Convertible black/black
Stripe delete option
SVT Performance Package
Electronic Package
637,1 HP / 803,2 NM / 11.37 PSI (DIN Measurement)
Metco 2.6" Supercharger Pulley
Metco 90mm Shelby/Metco Auxiliary Idler
VMP Inlet Elbow polished
Metco UCA
Shelby LCA
UMI Performance Relocation Brackets
FAYS2 Watts Link black
Hydrocarbon Exterior Upgrade

#73 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,396 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 06 June 2012 - 04:55 AM

Mi Amigo,

You posted a pdf of a exploded view on the 2013 front assembly somewhere on TS. I can't locate it. Do you have it handy?

Apparently the pic of the front splitter in the associated thread is gone and the one that remains seems to show the '13 splitter being different from the earlier versions. It LOOKS like a splitter, with either a "spacer" or the splitter is extended down about 1/2" and then the extra piece that I want to add to mine.

The exploded view should clear the issue up for me.


Thanks,
Phill



Here you get mi amigo...BTW did you get a PM from me? I havent gotten any answer from you!!

Attached Files


Edited by Amigo GT500, 06 June 2012 - 07:35 AM.

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#74 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 146 posts
  • Joined 04-February 12
  • Region:South Atlantic

Posted 06 June 2012 - 07:24 AM

Did you make the installation of the spllitter already? Do you have some pics?

Before ordering I want to know if I would need additional hardware to fix it on the existing splitter or would the splitter be fixed with the existing hardware.

Thanks in advance.


I don't have it installed yet. But looking at close up pics of one uninstalled, it looks like it snaps up into the bottom of the upper splitter and then the upper and lower splitter are secured with the existing hardware.

#75 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 06 June 2012 - 07:39 AM

BTW did you get a PM from me? I havent gotten any answer from you!!


I will have to look. I'm not real good about replying to PM's because I see them in my e-mail inbox, read them then can't reply unless I come/go to Team Shelby, open my PM box up, open the PM up, etc.


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#76 OFFLINE   69er-sagittarius

69er-sagittarius

    69er-sagittarius

  • Members
  • Pip
  • 90 posts
  • Joined 28-November 10
  • Region:European Union
  • Interests:Cars, Sports

Posted 06 June 2012 - 07:56 AM

I don't have it installed yet. But looking at close up pics of one uninstalled, it looks like it snaps up into the bottom of the upper splitter and then the upper and lower splitter are secured with the existing hardware.


Can you post the pic from this uninstalled so I can look for myself or do you have a Link where I can see it?
2011 Shelby GT500 Convertible black/black
Stripe delete option
SVT Performance Package
Electronic Package
637,1 HP / 803,2 NM / 11.37 PSI (DIN Measurement)
Metco 2.6" Supercharger Pulley
Metco 90mm Shelby/Metco Auxiliary Idler
VMP Inlet Elbow polished
Metco UCA
Shelby LCA
UMI Performance Relocation Brackets
FAYS2 Watts Link black
Hydrocarbon Exterior Upgrade

#77 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 06 June 2012 - 08:00 AM

Did you make the installation of the spllitter already? Do you have some pics?

Before ordering I want to know if I would need additional hardware to fix it on the existing splitter or would the splitter be fixed with the existing hardware.

Thanks in advance.


Look at the pdf that Amigo just posted. It shows two different bolts for the base splitter (HN1) and the splitter extension (HB5).

The HB5's look like extended bolts with a long shouder on them.


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#78 OFFLINE   69er-sagittarius

69er-sagittarius

    69er-sagittarius

  • Members
  • Pip
  • 90 posts
  • Joined 28-November 10
  • Region:European Union
  • Interests:Cars, Sports

Posted 06 June 2012 - 08:22 AM

Look at the pdf that Amigo just posted. It shows two different bolts for the base splitter (HN1) and the splitter extension (HB5).

The HB5's look like extended bolts with a long shouder on them.


Phill


Thank you Phil.
I supposed that the bolts have to be longer.
Just to be on the safe side, I just would need these two longer bolts to fix the additional 2013 front splitter to the existing one?
Do you have or anybody else a Part# for this bolts?

Edited by 69er-sagittarius, 06 June 2012 - 08:23 AM.

2011 Shelby GT500 Convertible black/black
Stripe delete option
SVT Performance Package
Electronic Package
637,1 HP / 803,2 NM / 11.37 PSI (DIN Measurement)
Metco 2.6" Supercharger Pulley
Metco 90mm Shelby/Metco Auxiliary Idler
VMP Inlet Elbow polished
Metco UCA
Shelby LCA
UMI Performance Relocation Brackets
FAYS2 Watts Link black
Hydrocarbon Exterior Upgrade

#79 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 06 June 2012 - 08:36 AM

Just to be on the safe side, I just would need these two longer bolts to fix the additional 2013 front splitter to the existing one?


My guess is that all 10 or 12 have to be the extended ones.

Maybe only 4? I can't see 2 bolts holding the entire splitter on.


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#80 OFFLINE   2sharpie

2sharpie

    Team Shelby Member

  • Members
  • PipPip
  • 652 posts
  • Joined 05-June 09
  • Region:Northeast

Posted 06 June 2012 - 10:00 AM

I take it the splitter doesn't come with the appropriate bolts??
Shelby Heat Exchanger -- ARH LT's/H pipe -- 3.73s -- VMP -- MAC MMS mufflers -- blacked out emblems -- powder coated rims -- FRPP resonator delete -- etc......... SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!

2013 RAPTOR ..............................


#81 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 146 posts
  • Joined 04-February 12
  • Region:South Atlantic

Posted 06 June 2012 - 10:24 AM

Here's some pics of one out of the box.

Attached Files



#82 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Mountain Region
  • 7,003 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 06 June 2012 - 10:45 AM

Here's some pics of one out of the box.


Cool. I think the OE bolts may work on that! At least from how I remember they fit.

When ya gonna try it on for size?


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#83 OFFLINE   patrickshelby

patrickshelby

    Team Shelby Member

  • World-Wide Region
  • 932 posts
  • Joined 20-October 08
  • Region:European Union

Posted 06 June 2012 - 10:47 AM

When ya gonna try it on for size?

Phill

+1

#84 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,396 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 06 June 2012 - 10:53 AM

Cool. I think the OE bolts may work on that! At least from how I remember they fit.

When ya gonna try it on for size?


Phill


+2

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#85 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,396 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 06 June 2012 - 10:54 AM

Here's some pics of one out of the box.


Dit it come with bolts? If it didnt maybe means that the OEM will fit...

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#86 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 146 posts
  • Joined 04-February 12
  • Region:South Atlantic

Posted 06 June 2012 - 01:56 PM

Cool. I think the OE bolts may work on that! At least from how I remember they fit.

When ya gonna try it on for size?


Phill

+1

+2

Dit it come with bolts? If it didnt maybe means that the OEM will fit...


Unfortunately, that's not mine. Mine is still in backorder limbo. That is one that came with a new '13. Just like the Boss' splitter doesn't come installed, neither does this one. It comes in the box for the buyer to put on (or have the dealer do it when delivered). Looking at the hardware package, it doesn't look like any bolts are included, so I would figure that the stock ones would work.

Attached Files



#87 OFFLINE   SteelTownStang

SteelTownStang

    SteelTownStang

  • Members
  • PipPip
  • 1,279 posts
  • Joined 13-August 09

Posted 06 June 2012 - 02:33 PM

I tried ordering the '13 splitter today from Tousley... and a local dealership. I was informed that it is on backorder until July 9th...
NEW CAR: 2012 GT500 Black w/Grabber Blue Stripes
RECENTLY SOLD CAR: 2008 GT500 Red w/White Stripes
MODS: VMP 2.59 Pulley & Tune, JLT Induction Tube, Airaid Blue SynthaMax Filter, Painted STB Brace, FRPP Springs, BRM Adjustable Panhard Bar, Borla S-Type Exhaust, 20% Window Tint, Speed Dawg Shifter, NXT Hood Lifts, CDC Dead Pedal, Kicker Speaker/Sub Upgrade, Cobra Floor Mats, 2013 Splitter, SVTPP Wheels & Tires, Cervini Tinted Taillight, V-Led 5K LED Fog Lights, etc.



Posted Image


#88 OFFLINE   blackout

blackout

    Blackout

  • Members
  • Pip
  • 125 posts
  • Joined 01-July 11
  • Region:Mountain

Posted 06 June 2012 - 04:30 PM

Putting in my order tonite...should have my SS back from SAI by July.

Cheers,
Blackout

#89 OFFLINE   patrickshelby

patrickshelby

    Team Shelby Member

  • World-Wide Region
  • 932 posts
  • Joined 20-October 08
  • Region:European Union

Posted 06 June 2012 - 09:21 PM

Unfortunately, that's not mine. Mine is still in backorder limbo. That is one that came with a new '13. Just like the Boss' splitter doesn't come installed, neither does this one. It comes in the box for the buyer to put on (or have the dealer do it when delivered). Looking at the hardware package, it doesn't look like any bolts are included, so I would figure that the stock ones would work.

There are clips in this bag.

#90 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 146 posts
  • Joined 04-February 12
  • Region:South Atlantic

Posted 07 June 2012 - 01:58 AM

There are clips in this bag.

Yes, those hold the 3 pieces of the lower splitter to each other.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users