Jump to content




Front Splitter ffrom 2013


  • Please log in to reply
157 replies to this topic

#21 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 5,959 posts
  • Joined 31-October 09
  • Gender:Male
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
  • Vehicle:GT500

Posted 17 May 2012 - 05:01 PM

<DELETE> Dupe post

Edited by 2010KonaBlueGT, 19 May 2012 - 09:41 AM.

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY:  SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#22 OFFLINE   blackout

blackout

    Blackout

  • Team Shelby Club Member
  • 125 posts
  • Joined 01-July 11
  • Gender:Male
  • Region:Mountain
  • Vehicle:GT500 SuperSnake

Posted 17 May 2012 - 06:50 PM

EESH...I'm shooting for 9am...but am going to wait...I'm going to bring the part number...hope to see you then.

Cheers,
Mike

#23 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 116 posts
  • Joined 04-February 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 18 May 2012 - 12:06 PM

Definately let me know about the lower front splitter as well.  I just ordered the upper and lower grilles today.  I would love the splitter to go with them!

#24 OFFLINE   lemarin

lemarin

    Team Shelby New Member

  • Members
  • Pip
  • 117 posts
  • Joined 07-May 11
  • Gender:Male
  • Interests:Car, internet, bike (mountain and road), photography

Posted 18 May 2012 - 05:58 PM

View Postjskup1, on 18 May 2012 - 12:06 PM, said:

Definately let me know about the lower front splitter as well.  I just ordered the upper and lower grilles today.  I would love the splitter to go with them!

What are the parts number that you ordered ? Together with the lower front spitter, will you have the complete 2013 GT500 front ?
2011 Ford Mustang Shelby GT500 convertible with SVT PP 6 speed
2011 Audi S4 Premium Bang & Navi 6 speed
2012 Volkswagen Golf R 6 speed

#25 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 116 posts
  • Joined 04-February 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 18 May 2012 - 06:24 PM

View Postlemarin, on 18 May 2012 - 05:58 PM, said:

What are the parts number that you ordered ? Together with the lower front spitter, will you have the complete 2013 GT500 front ?


The upper grille p/n is: DR3Z-8200-AA and the lower grille is: DR3Z-17K945-AA.   I also ordered a sheet of black powdercoated 80% flow  stainless steel mesh to protect the radiator and h/e.

#26 OFFLINE   blackout

blackout

    Blackout

  • Team Shelby Club Member
  • 125 posts
  • Joined 01-July 11
  • Gender:Male
  • Region:Mountain
  • Vehicle:GT500 SuperSnake

Posted 18 May 2012 - 07:28 PM

Interested in the parts source and fit (for MY 2012) for all three pieces: splitter, upper and lower grill. Also wondering about the emblem...seperate item or does the upper grill include it?

#27 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 116 posts
  • Joined 04-February 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 19 May 2012 - 09:35 AM

View Postblackout, on 18 May 2012 - 07:28 PM, said:

Interested in the parts source and fit (for MY 2012) for all three pieces: splitter, upper and lower grill. Also wondering about the emblem...seperate item or does the upper grill include it?
The Cobra emblem is separate.  However, the one from the 2012 grille should fit the '13.

#28 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 5,959 posts
  • Joined 31-October 09
  • Gender:Male
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
  • Vehicle:GT500

Posted 19 May 2012 - 09:45 AM

View Postjskup1, on 18 May 2012 - 12:06 PM, said:

Definately let me know about the lower front splitter as well.  I just ordered the upper and lower grilles today.  I would love the splitter to go with them!

I was just told yesterday that the grilles were not interchangeable. Something about the grille openings being 1 inch smaller. I think the bumper area is wider so the grille could be 1" smaller on the bottom side of the top and the top side of the bottom.

I'm very interested to find out if that's accurate or not.

I compared the grille on a '13 Roush Stage 3 with a '12 GT500 and the bumper section on the Roush is DEFINATELY wider. The lower was without a doubt smaller (on the '13) but the upper looked close. I'm just not sure if the Mustang GT (and/or Roush Stage 3) is the same as the GT500 (facia).


Please let us know what you find,
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY:  SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#29 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 5,959 posts
  • Joined 31-October 09
  • Gender:Male
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
  • Vehicle:GT500

Posted 19 May 2012 - 09:48 AM

I also measured the tail lights on the Roush Stage 3 (Mustang GT) and they are outwardly identical to the '12 GT500 rear lights. I can't say if they will fit in the pocket but the outside dimensions are the same so it *appears* the rear tail light assemblies will interchange, for those interested in the new LED rear lights.


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY:  SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#30 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 116 posts
  • Joined 04-February 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 19 May 2012 - 04:56 PM

The roush is based off the GT, not the Shelby.  The GT's front bumper is different.  The part # for the '13 front bumper is the same as the '12's.  Even though the tail lights from the 13 will fit on the 12, there is a point that the 10-12 tail lights come to at the bottom that the 13's don't have.  The 13's are more rounded at the bottom.  Therefore, there will be a small gap at the bottom.  There are plenty of pics of this going around.

#31 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • Team Shelby Club Member
  • 1,333 posts
  • Joined 05-July 11
  • Gender:Male
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles
  • Vehicle:GT500

Posted 21 May 2012 - 10:03 AM

View Post2010KonaBlueGT, on 19 May 2012 - 09:45 AM, said:

I was just told yesterday that the grilles were not interchangeable. Something about the grille openings being 1 inch smaller. I think the bumper area is wider so the grille could be 1" smaller on the bottom side of the top and the top side of the bottom.

I'm very interested to find out if that's accurate or not.

I compared the grille on a '13 Roush Stage 3 with a '12 GT500 and the bumper section on the Roush is DEFINATELY wider. The lower was without a doubt smaller (on the '13) but the upper looked close. I'm just not sure if the Mustang GT (and/or Roush Stage 3) is the same as the GT500 (facia).


Please let us know what you find,
Phill

The shop told me that my car has already the grilles installed. I will go today and pick it up. Post pictures tomorrow

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels

2007 Shelby GT - CSM 07SGT0874 - White, Silver Stripes, Grey Interior, Auto Transmission (1 of 48)

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes



"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."


#32 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 5,959 posts
  • Joined 31-October 09
  • Gender:Male
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
  • Vehicle:GT500

Posted 21 May 2012 - 10:05 AM

View PostAmigo GT500, on 21 May 2012 - 10:03 AM, said:

The shop told me that my car has already the grilles installed. I will go today and pick it up. Post pictures tomorrow

So without queston (and/or modification), they DO fit?

COOL!


Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY:  SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#33 OFFLINE   jskup1

jskup1

    Team Shelby New Member

  • Members
  • Pip
  • 116 posts
  • Joined 04-February 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 21 May 2012 - 10:43 AM

View Postjskup1, on 19 May 2012 - 09:35 AM, said:

The Cobra emblem is separate.  However, the one from the 2012 grille should fit the '13.

I was mistaken, the '13 grille comes with the emblem!

#34 OFFLINE   Burning Blue Star IV

Burning Blue Star IV

    Team Shelby Member

  • Members
  • PipPip
  • 3,335 posts
  • Joined 14-June 09
  • Gender:Male
  • Region:Northeast
  • Interests:Hockey, Music, Love, Astronomy,country roads, camping, great food, Wine, playing guitar, Sci-Fi & Computers
  • Vehicle:GT500

Posted 21 May 2012 - 01:44 PM

View PostAmigo GT500, on 21 May 2012 - 10:03 AM, said:

The shop told me that my car has already the grilles installed. I will go today and pick it up. Post pictures tomorrow
Can't wait to see the pics Amigo! :)
2010 Shelby GT500
Posted Image

#35 ONLINE   NMAv

NMAv

    Team Shelby Member

  • Members
  • PipPip
  • 582 posts
  • Joined 10-January 11
  • Gender:Male
  • Region:Mountain
  • Interests:hockey, family, weight lifting, cars
  • Vehicle:GT500

Posted 21 May 2012 - 02:07 PM

View Postjskup1, on 18 May 2012 - 06:24 PM, said:

The upper grille p/n is: DR3Z-8200-AA and the lower grille is: DR3Z-17K945-AA.   I also ordered a sheet of black powdercoated 80% flow  stainless steel mesh to protect the radiator and h/e.

Please let us know if the install works as we all hope.
~ NMAv


2011 Shelby GT500 with SVTPP (Kona Blue)

Modifications in order of occurance:  Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake *  2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera

Waiting to be installed:  bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching:  1.  Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.


Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune.  Ultimate goal: Surpassed

#36 ONLINE   NMAv

NMAv

    Team Shelby Member

  • Members
  • PipPip
  • 582 posts
  • Joined 10-January 11
  • Gender:Male
  • Region:Mountain
  • Interests:hockey, family, weight lifting, cars
  • Vehicle:GT500

Posted 21 May 2012 - 02:08 PM

View PostBurning Blue Star IV, on 21 May 2012 - 01:44 PM, said:

Can't wait to see the pics Amigo! :)

+1
~ NMAv


2011 Shelby GT500 with SVTPP (Kona Blue)

Modifications in order of occurance:  Escort 9500ix * Clearbra * Lund Tune * zPod with Areoforce gauges * Hood Lift Supports * 15% IW * J&M LCA * Shelby Watts link * JLT Oil Seperator * Revan H/E * ARH long tube/high flow cats w/H pipe * billet motor mounts * Evo 3 Point Frame Rail & Torque Box Brace * Boss 302 guage cluster * Boss 302 front brake ducts * OEM look Intercooler Reservoir 3x Capacity * HID Guy fog lights * Bosch 72 lb injectors * Driveshaft Co aluminum driveshaft * BMR LCA relocation brackets * Dynomax bullet mufflers * Kenne Bell 3.6 LC with 3.75 pulley * BMR UCA * Tow hook * Trufiber Black Momba hood * C&R radiator * Thump Racing tensioner - 5" KB high flow air intake *  2013 Upper front grille * 2013 splitter * Shelby transmission cooler scoop * Steeda SS brake lines * Shelby K Member support plates * NavTV reverse camera

Waiting to be installed:  bump stop relocation bracket,3 pod gauge cluster - door, Shelby starter button, rear sway bar relocation bracket.
Currently researching:  1.  Brake modifications - Front - Hawk street/performance pads with DBA 4000/5000 slotted rotors, Goodridge SS brake lines. Rear - Eradispeed 14" rotors (Maybe) and Hawk street/performance pads, Reverse camera by NAV TV.


Currently at 803 rwhp/717 torque with KB 3.6 LC, 3.75 inch upper on juiced gas, 15% IW lower and Jun Lund tune.  Ultimate goal: Surpassed

#37 OFFLINE   blackout

blackout

    Blackout

  • Team Shelby Club Member
  • 125 posts
  • Joined 01-July 11
  • Gender:Male
  • Region:Mountain
  • Vehicle:GT500 SuperSnake

Posted 21 May 2012 - 03:19 PM

View New Content!
View New Content!
View New Content!
View New Content!
View New Content!
...

#38 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • Team Shelby Club Member
  • 1,333 posts
  • Joined 05-July 11
  • Gender:Male
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles
  • Vehicle:GT500

Posted 22 May 2012 - 05:05 AM

Here are the pics......

- It fits perfect
- It comes with the Cobra emblem
- As the grille is totally open there is a part of the bumper in each side that is visble in the background and looks ugly. It would be interesting how is in the 2013. I told the shop guy to paint it in black.
- I hope that when the front is assembled the word "SHELBY" can be seen in the lower grille.
- I will look for more pictures of the 2013 to try to see what is in the background of the grille......in other words, between the grille and the radiator......

Attached Files


Edited by Amigo GT500, 22 May 2012 - 05:15 AM.

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels

2007 Shelby GT - CSM 07SGT0874 - White, Silver Stripes, Grey Interior, Auto Transmission (1 of 48)

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes



"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."


#39 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • Team Shelby Club Member
  • 1,333 posts
  • Joined 05-July 11
  • Gender:Male
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles
  • Vehicle:GT500

Posted 22 May 2012 - 05:07 AM

Here is the part of the bumper which has to be painted

Attached Files


Edited by Amigo GT500, 22 May 2012 - 05:07 AM.

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels

2007 Shelby GT - CSM 07SGT0874 - White, Silver Stripes, Grey Interior, Auto Transmission (1 of 48)

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes



"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."


#40 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • Team Shelby Club Member
  • 1,333 posts
  • Joined 05-July 11
  • Gender:Male
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles
  • Vehicle:GT500

Posted 22 May 2012 - 05:09 AM

I hope that this will be seen in the lower grille

Attached Files


Edited by Amigo GT500, 22 May 2012 - 05:09 AM.

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels

2007 Shelby GT - CSM 07SGT0874 - White, Silver Stripes, Grey Interior, Auto Transmission (1 of 48)

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes



"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users