Not sure what is the best way to go here. I want to put a flat black super snake stripe on my Black 2008 gt 500. Do I go with paint or vinyl? if vinyl then where can I buy a good quality kit from? This was bought stripe delete is why i was thinking vinyl.
Thanks for any and all help!
MIke
Super Snake Stripe Kit
Started by
Byrneout
, Apr 13 2012 06:07 PM
5 replies to this topic
#1 OFFLINE
Posted 13 April 2012 - 06:07 PM
#2 OFFLINE
Posted 13 April 2012 - 08:05 PM
SuperSnake. TVS. FRPP CAI. CJ65 TB. VMP *Big TB* Inlet. VMP 2.65 pulley/tune. FORE Billet fuel rails. JLT oil separator. Dynatech exhaust headers. Shelby billet shifter. DYNOTECH 1-piece aluminum drive shaft. 170* thermostat. Shelby Extreme Duty Cooling system. FRPP M-4033-G2 diff girdle cover. 3.73 gears. billet Steeda LCA's & adj UCA. CHE LCA relocations brackets. H&R sway bars. FR3 springs. Tokico D-Specs. Shelby/Fays2 Billet Watts link, Shelby/Baer Big brakes. 20X11.75 rears. Michelin PS2 335/30's.
#3 OFFLINE
Posted 13 April 2012 - 08:19 PM
i was at AmericanMuscle on Thursday, they print and cut their own graphics. They put a set of SS style stripes on one of their project cars: http://www.americanm...roject-car.html
~Matt
"My wife asks me, why you do those burnouts? Well.....you do it for the kids, you know, Im not being immature. You just.....well you do it for the kids."
~Jay Leno
"My wife asks me, why you do those burnouts? Well.....you do it for the kids, you know, Im not being immature. You just.....well you do it for the kids."
~Jay Leno
#4 OFFLINE
Posted 14 April 2012 - 06:05 AM
I got mine from John Farmer at Stuck On You graphics. He posts on this site. Here is a pic of mine. Sorry for the poor quality, and mine of course is a later car.
Colin
Colin
Edited by creilly333, 14 April 2012 - 06:06 AM.
Black 2012 Shelby GT500 SVTPP Coupe
#5 OFFLINE
Posted 14 April 2012 - 10:42 AM
creilly333, on 14 April 2012 - 06:05 AM, said:
I got mine from John Farmer at Stuck On You graphics. He posts on this site. Here is a pic of mine. Sorry for the poor quality, and mine of course is a later car.
Colin
Colin
Last time I looked at his site it didn't show the Trans-Am style stripes like you have on your car. I'm interested in the same stripe as yours but in white.
Hoping Farmer will see this and chime in....
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#6 OFFLINE
Posted 21 May 2012 - 06:38 AM
I love the black on black!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users











