Jump to content





Photo

Grill Fitment with CS6 Front Fascia

cs6 cs6 grill cs6 front fascia grill

  • Please log in to reply
2 replies to this topic

#1 OFFLINE   PonyPack

PonyPack

    Team Shelby New Member

  • Members
  • Pip
  • 1 posts
  • Joined 07-June 12
  • Region:South Atlantic

Posted 07 June 2012 - 12:41 PM

I currently own a 2006 v6 Mustang with a Pony Pack and would like to install the CS6 front fascia. I would like to keep the stock grill and foglights and wanted to know if this was possible. I called Shelby a few times and never found anyone that could help and was finally told to just ask here. If you know of any way to install the front fascia with the stock grill or modify the grill to make it fit, I would greatly appreciate it. I know you have to use the CS6 grill with the GT, but as mine is the v6 and the grill housing is the same, I cannot see why I need something else. Any help on this would be greatly appreciated.

Edited by PonyPack, 07 June 2012 - 01:17 PM.


#2 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 07 June 2012 - 02:56 PM

I think it will work ,if you use the stock V6 grill in the CS6 front fascia ,,grill should be the same size across the opening ,,so I would say yes it will work ,,and a GT grill is a different size , than the V6 one , GT grill is bigger / longer across the opening ,, you " can not " put a GT / V8 grill in the CS6 front fascia ,want work ,to big ,, hope this helps alittle ,, I've been there ,done that ,, just saying , :camera: ,Attached File  002410-R1-22-3A.jpg   418.15KB   7 downloads,,,Respectfully Richard . B)
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#3 OFFLINE   SHELBYCS6

SHELBYCS6

    Team Shelby Member

  • Members
  • PipPip
  • 931 posts
  • Joined 01-November 07
  • Region:Canada

Posted 07 June 2012 - 03:05 PM

The CS6 fascia will most certainly work with the stock grill as that is what is used in the CS6 grill assembly.

You have to take the stock grill and cut out the center then fit the CS6 grill with threaded rod and nuts so the main framework in the original V6 grill itself.

The CS6 grill is just an overlay that bolts to the factory grill.





Also tagged with one or more of these keywords: cs6, cs6 grill, cs6 front fascia, grill

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users