Shelbys Across Canada: Dearborn To Halifax, NS.
#142 OFFLINE
Posted 21 December 2012 - 12:32 PM
All factory options except 1000 and Nav. (1 of 38 w/ red int.)
Aftermarket - Shelby Signed Dash Plaque and Sills, TVG Cobra Valve Stem Caps, Street SceneTail Light Trim, Shelby Brake Ducts, J&M LCA's, Shelby KR Mufflers, Cobra Fuse Box Cover, Stillen Hood Struts, Shelby Black Fuel Door, Shelby Dead Pedal, Stillen Front and Rear Drilled/Slotted Rotors, FRPP CAI, VMP Tune, Bangastang Radiator Cover, Ford GT500 2010 Shift Knob, Painted Strut Tower Brace, Stack Racing Sequential Tail Lights, Shelby Alloy Engine Caps, "VENOM" License Plate, 2010 Ford Clutch, FRPP 3.73s, FRPP Diff. Cover, MGW shifter, FRPP Adj. Panhard Bar, Ford Updated Front Lower Control Arms, Ford Axle Vent Update, FRPP Blue Valve Covers, Ford Racing Polished Al Coil Covers, G2 Red Painted Brembos, 2.6 Pulley, Metco Idler, S H E L B Y letters across decklid, PHRP H-pipe, Custom Machined BBS BOSS 302R Wheels, Custom Machined Locks & Lugs, Nitto NT 555 Tires.
#143 OFFLINE
Posted 21 December 2012 - 12:55 PM
Shelbyville, on 21 December 2012 - 12:32 PM, said:
Our goal is to combine it with Dearborn.
#144 OFFLINE
Posted 20 February 2013 - 12:21 PM
All factory options except 1000 and Nav. (1 of 38 w/ red int.)
Aftermarket - Shelby Signed Dash Plaque and Sills, TVG Cobra Valve Stem Caps, Street SceneTail Light Trim, Shelby Brake Ducts, J&M LCA's, Shelby KR Mufflers, Cobra Fuse Box Cover, Stillen Hood Struts, Shelby Black Fuel Door, Shelby Dead Pedal, Stillen Front and Rear Drilled/Slotted Rotors, FRPP CAI, VMP Tune, Bangastang Radiator Cover, Ford GT500 2010 Shift Knob, Painted Strut Tower Brace, Stack Racing Sequential Tail Lights, Shelby Alloy Engine Caps, "VENOM" License Plate, 2010 Ford Clutch, FRPP 3.73s, FRPP Diff. Cover, MGW shifter, FRPP Adj. Panhard Bar, Ford Updated Front Lower Control Arms, Ford Axle Vent Update, FRPP Blue Valve Covers, Ford Racing Polished Al Coil Covers, G2 Red Painted Brembos, 2.6 Pulley, Metco Idler, S H E L B Y letters across decklid, PHRP H-pipe, Custom Machined BBS BOSS 302R Wheels, Custom Machined Locks & Lugs, Nitto NT 555 Tires.
#145 OFFLINE
Posted 20 February 2013 - 12:31 PM
#146 OFFLINE
Posted 20 February 2013 - 02:26 PM

Sorry officer, I thought you wanted to race!
2007 SGT CSM07SGT1316 Purchased 5/12/07 Black, 5 speed
Blue Oval Sequential Taillights, Lower Grille, Faux Snake Gas Cap, Shorty Antenna,
1st GT/SC conversion by Tasca since Shelby released the Model!!!
550 Whipple, Baer drilled and slotted rotors, Hawk pads, Gauge Pod,
McLoed twin disc clutch and Aluminum Flywheel, Shelby billet license frame,
Whipple 10 Rib belt system, Lethal Ind. Poly motor mounts, Shelby snake center caps,
quarter window black outs, Shelby billet engine cap set, Shelby brake duct bezels and
PIAA lights.
No, I have not dynoed it.
#147 OFFLINE
#148 OFFLINE
Posted 20 February 2013 - 02:39 PM
#149 OFFLINE
#150 OFFLINE
#151 OFFLINE
Posted 21 February 2013 - 05:03 AM
#1534 of 3004 coupes; #378 of 651 Performance White w/ Vista Blue stripes
Celebrity Pick All Fords Nationals, Carlisle 2010 "Clean & Correct"
Celebrity Pick All Fords Nationals, Carlisle 2012 "Track History"
40,000 miles.... It isn't a FLOWER!
Shelby Alcoa 20" rims w/ Nitto Invo's 255/35ZR front, 295/35ZR rear, Shelby LCA Relocation brackets; Shelby Short Throw Shifter, FRPP Cold-Air intake; FRPP Strut Tower Brace; JDM Engineering Tune; L&M Plenum (port matched blower); KR Exhaust; SPEC Super Twin S-Trim Clutch; AM Sequential taillights; CDC Hood Struts; Shelby Kicker Premium upgrade; Shelby GT500 Door sill; Lloyds GT500 floor mats, Visor and Dash plaque signed by Mr Shelby; Shelby 50th fender stripe... And decals GALORE!
2004 Jeep Rubicon Jeep wrote the book on 4X4
1931 Model A Pickup Original resotration
At Primland lodge in the Blue Ridge Mountains on a foggy morning... Meadows of Dan, VA.
#152 OFFLINE
Posted 21 February 2013 - 08:09 AM
11th hour...........clock is ticking.~!
Masterfully Modified at MacKenzie Mustang Supply in Palm Springs, California
Deep Draw Hood (clears my Whipple without lowering the engine) and Painted Stripes / August 2011
4.6 Aluminator built by L&M Race Engines, Hatboro, PA. February 2012, 700hp!
Shelby Run Europe 2012 Participant!




[







#153 OFFLINE
Posted 21 February 2013 - 02:21 PM
mywickedshelby, on 21 February 2013 - 08:09 AM, said:
11th hour...........clock is ticking.~!
#154 OFFLINE
Posted 27 February 2013 - 11:18 AM
Although I'm sure not looking forward to driving that many miles without a radar detector!
All factory options except 1000 and Nav. (1 of 38 w/ red int.)
Aftermarket - Shelby Signed Dash Plaque and Sills, TVG Cobra Valve Stem Caps, Street SceneTail Light Trim, Shelby Brake Ducts, J&M LCA's, Shelby KR Mufflers, Cobra Fuse Box Cover, Stillen Hood Struts, Shelby Black Fuel Door, Shelby Dead Pedal, Stillen Front and Rear Drilled/Slotted Rotors, FRPP CAI, VMP Tune, Bangastang Radiator Cover, Ford GT500 2010 Shift Knob, Painted Strut Tower Brace, Stack Racing Sequential Tail Lights, Shelby Alloy Engine Caps, "VENOM" License Plate, 2010 Ford Clutch, FRPP 3.73s, FRPP Diff. Cover, MGW shifter, FRPP Adj. Panhard Bar, Ford Updated Front Lower Control Arms, Ford Axle Vent Update, FRPP Blue Valve Covers, Ford Racing Polished Al Coil Covers, G2 Red Painted Brembos, 2.6 Pulley, Metco Idler, S H E L B Y letters across decklid, PHRP H-pipe, Custom Machined BBS BOSS 302R Wheels, Custom Machined Locks & Lugs, Nitto NT 555 Tires.
#155 OFFLINE
Posted 08 March 2013 - 10:44 AM
#156 OFFLINE
Posted 09 March 2013 - 04:06 AM
We need the Dearborn dates to be set and to get the Ontario Region plans set in place and the bash will be taking all of the director's time up and we can send updates after the event
Hope this helps

2007 Vista Blue coupe, white stripes tinted windows -Shaker 1000 ,Steeda CAI-SH 2.6 pulley Metco tensioner-SCT live wire tune Eibach Pro kit -Polished Steeda LCA's-Steeda UCA and bracket, 3.73 gears,,2008 mods Kooks headers catted X-pipe and Magnaflow stainless exhaust Innovators west Aluminum OD balancer, DSS driveshaft 160mm T-body Cross drilled Slotted rotors Steeda Adj panhard bar, FMS rear end cover , 2008 ET 10.93 @ 126.55 mph and Dyno #'s 625 RWHP 599 RWTQ on ET Streets, 2012 mods, Shelby heat exchanger, Reservoirs, Vortex series 4 pads, Steeda 20x11 /20x10 Spyder rims with Nitto 315/35/20 - 275/45/20, 6 piston brembos with 15"rotors, rear brake upgrade, stainless brake lines
2013 TVS blower, KB Dual Boost-a-pump now making in Sept 2012 - 755 RWHP & 687 RWTQ
#157 OFFLINE
Posted 30 March 2013 - 06:21 AM
Maybe next year......
#158 OFFLINE
Posted 30 March 2013 - 06:37 AM
We hope to be able to hold a track day this year sometime in the fall we will keep you posted.
#159 OFFLINE
Posted 30 March 2013 - 07:35 AM
#160 OFFLINE
Posted 31 March 2013 - 06:12 AM
Also tagged with one or more of these keywords: shelby drive, canada
Shelby GT500 Forum →
Shelby GT500 Classified Ads →
FS: 2010 Shelby GT500 black/black fully loaded, 19k KM, Alcoas, Toronto/CanadaStarted by Ratven , 16 Dec 2012 |
|
|
||
Team Shelby Regional Groups →
Team Shelby Regional Groups →
Canada, Ontario →
Welcome to Team Shelby - Ontario, CanadaStarted by robertlane , 03 Sep 2012 |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users











