Jump to content





Photo

14" Baer EradisSpeed+2 upgrade on the rear with stock 18" wheels?


  • Please log in to reply
4 replies to this topic

#1 OFFLINE   tom_schmidt

tom_schmidt

    Team Shelby New Member

  • World-Wide Region
  • 11 posts
  • Joined 18-October 08
  • Region:European Union
  • Interests:US-Cars, Big cars, V8s

Posted 19 July 2012 - 09:42 PM

Hello Guys,

will the 14" Baer EradiSpeed+2 rear rotors fit on the back with stock 18" wheels on a 2008 GT500 without any mods (e.g. wheel spacers)?

http://www.baer.com/...tegory_id=15016

Thank you in advance
Tom

Edited by tom_schmidt, 20 July 2012 - 10:53 AM.


#2 OFFLINE   fcettner

fcettner

    09KR0453

  • South Atlantic Region
  • 452 posts
  • Joined 13-October 09
  • Region:South Atlantic
  • Interests:NASCAR Racing (Go Greg Biffle), Fords, Football (Go Steelers) and Baseball (Reds). My Shelby 09KR and other Fords I always seem get my hands on. Check out my video!

Posted 20 July 2012 - 11:49 AM

Call Baer and they will assist in your fitment. I had no problem with my 18" alcolas when doing this upgrade. Can't speak for the stock wheels. Baer has great customer service.

#3 OFFLINE   MMcGuirk

MMcGuirk

    Team Shelby Member

  • Team Shelby Regional Director
  • 2,920 posts
  • Joined 03-December 07
  • Region:Pacific Coast
  • Interests:Everything automotive, NHL, NCAAF, German Shepherd dogs

Posted 20 July 2012 - 12:06 PM

Hello Guys,

will the 14" Baer EradiSpeed+2 rear rotors fit on the back with stock 18" wheels on a 2008 GT500 without any mods (e.g. wheel spacers)?

http://www.baer.com/...tegory_id=15016

Thank you in advance
Tom


yes they will. i have them on both my cars and have all the clearance needed. You will however, have to use low profile wheel weights. My wheels are balanced with the weights on the inside and standard height weights hit the calipers.
TEAM SHELBY PACIFIC REGION DIRECTOR
Team Shelby member 906

2011 Shelby GT350 - CSM113500040
624 HP, 604.6 RWHP Watt's Link, Partial painted stripes, Museum delivery 4/6/11 Tremec Magnum XL

#4 ONLINE   car dude

car dude

    Team Shelby Member

  • Members
  • PipPip
  • 3,463 posts
  • Joined 18-January 10
  • Interests:Cars,Fishing, Golf,Wife and kids

Posted 20 July 2012 - 06:31 PM

Same here know problems. Just make sure you read the directions before installing i did not
And ended up stripping the calipers.thats what happens when you try and rush things.i also
Did the bear front rotors. When you first pick one up you think its heavy but when you
Pick up the stock front rotor it feels like a boat anchor. Good to luck .

Edited by car dude, 20 July 2012 - 06:32 PM.

[ img]http://Posted Image[/img]

#5 OFFLINE   tom_schmidt

tom_schmidt

    Team Shelby New Member

  • World-Wide Region
  • 11 posts
  • Joined 18-October 08
  • Region:European Union
  • Interests:US-Cars, Big cars, V8s

Posted 21 July 2012 - 12:08 AM

yes they will. i have them on both my cars and have all the clearance needed. You will however, have to use low profile wheel weights. My wheels are balanced with the weights on the inside and standard height weights hit the calipers.




Thank you, that's the answer i was looking for! :happy feet:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users