Jump to content





Photo

NEW! Shelby Rear Shock Tower Brace!


  • Please log in to reply
140 replies to this topic

#31 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 05 September 2012 - 05:14 AM

The Ford Shaker 1000 (I'm guessing that's what you have) blocks access to the shock tower, so the brace won't fit.
The Kicker subwoofer is $499.
There is no "package deal".
We use FedEx for delivery, the rates are set by them.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#32 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,586 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 05 September 2012 - 10:58 AM

Jer,

The pic I saw of this brace installed appears to show it running along the floor of the trunk just behind the rear seats without blocking the folding action of the seats - is that correct? (I already ordered one...)

Sam

PS: I ordered some hood lifts from Champion - theirs are laser engraved "Shelby" - why not SPPs?
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#33 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 05 September 2012 - 12:12 PM

Jer,

The pic I saw of this brace installed appears to show it running along the floor of the trunk just behind the rear seats without blocking the folding action of the seats - is that correct? (I already ordered one...)

Sam

PS: I ordered some hood lifts from Champion - theirs are laser engraved "Shelby" - why not SPPs?


The seats fold as usual.
I'll check into the hood lift question.

BTW, everyone, we've added the Instructions to the Product Page as a clickable link.

Instructions:
For instructions click here




Jer

Edited by Jer, 05 September 2012 - 12:13 PM.

2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#34 OFFLINE   - Aj -

- Aj -

    500HP LOL

  • Members
  • Pip
  • 113 posts
  • Joined 02-March 11
  • Region:Pacific Coast

Posted 05 September 2012 - 02:17 PM

PS: I ordered some hood lifts from Champion - theirs are laser engraved "Shelby" - why not SPPs?


That is interesting especially since the stickers on mine are already starting to peel. :-/

aNF4ivd.jpg
~JLT 123mm CF CAI~VMP 2.59 Pulley/90mm Idler~
~L&M 66m Throttle Body~Ported Stock Eaton Elbow~
~Dynatech Headers~Borla Touring Axleback~Shelby Heat Exchanger~
~FRPP Shifter~Shelby Handling Kit~Eibach Pro Kit~
~BMR Rear Lower Control Arms/Reloc Brackets~BMR Panhard Bar & Brace~
~SVTT 19"/20" Wheels~
Nitto NT555R 315/35/20~
~2010+ Updated Trans~Shelby Hood Lift Kit~Shelby Supersnake Hood~

Pics


#35 OFFLINE   Husky44

Husky44

    Team Shelby New Member

  • Pacific Northwest Region
  • 167 posts
  • Joined 24-August 12
  • Region:South Atlantic
  • Interests:Cars
Garage View Garage

Posted 05 September 2012 - 05:05 PM

The Ford Shaker 1000 (I'm guessing that's what you have) blocks access to the shock tower, so the brace won't fit.
The Kicker subwoofer is $499.
There is no "package deal".
We use FedEx for delivery, the rates are set by them.


Jer


Just went to the parts page to look at the subwoofer-I see a 10" woofer, but no subwoofer. Price is the $499 you mention above. It says in that part listing that it's not for verts. Is there a Kicer subwoofer that works in verts, that allows the rear shock tower brace to fit?
2013 GT500 Convertible: Grabber Blue, Black Stripes, SVTPP, NAV, Recaros, Shaker Pro
Posted Image

1967 Mustang Convertible: Restomod (in progress)--347, TF heads and intake, World Class T5, 8.8 with 4:10s, Cobra 4 wheel disc brakes...

#36 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 05 September 2012 - 06:37 PM

Just went to the parts page to look at the subwoofer-I see a 10" woofer, but no subwoofer. Price is the $499 you mention above. It says in that part listing that it's not for verts. Is there a Kicer subwoofer that works in verts, that allows the rear shock tower brace to fit?


Hmmm... Interesting conundrum. I'll look into it.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#37 OFFLINE   dh777

dh777

    08SGT0994

  • Southern Plains Region
  • 1,328 posts
  • Joined 01-August 07
  • Region:Southern Plains
  • Interests:.

Posted 05 September 2012 - 06:53 PM

Just went to the parts page to look at the subwoofer-I see a 10" woofer, but no subwoofer. Price is the $499 you mention above. It says in that part listing that it's not for verts. Is there a Kicer subwoofer that works in verts, that allows the rear shock tower brace to fit?


I don't own a vert - but I know a few vert owners. The kicker subwoofer does not fit verts and my understanding they do not plan to make one. I could be wrong - but there a a couple of threads on this around the forum somewhere.
DeWayne

Posted Image
3 Blue Mustangs
1965 coupe - Caspian Blue 289 automatic coupe
2008 SGT/SC Vista Blue - 08SGT0994 - SAI SGT/SC package with HO polished Whipple, 3.73 and Kicker system. 507 RWHP and 497 Torque
2009 Terlingua - Vista Blue - 09TRT0402 - Possibly the first factory glass roof Shelby. The only Vista Blue, the only glass top and the first performance automatic Terlingua - Quantum built performance package - - 3.73, Kicker system and interior upgrade. Many other upgrades and mods.
THE BAD HARE

#38 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,410 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 06 September 2012 - 04:44 AM

Jer,

The pic I saw of this brace installed appears to show it running along the floor of the trunk just behind the rear seats without blocking the folding action of the seats - is that correct? (I already ordered one...)

Sam

PS: I ordered some hood lifts from Champion - theirs are laser engraved "Shelby" - why not SPPs?


I ordered those from them as well....they are great!!

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#39 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,410 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 06 September 2012 - 04:49 AM

The seats fold as usual.
I'll check into the hood lift question.

BTW, everyone, we've added the Instructions to the Product Page as a clickable link.

Instructions:
For instructions click here




Jer


Thanks Jer.....it looks very easy to do it!!

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#40 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,586 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 07 September 2012 - 03:22 PM

Jer,

Correction to my PS! I just received the gas struts from Champion and
they are NOT laser engraved! They have a label/wrap and THAT says
Shelby on it! So they are slightly misleading in saying "laser engraved"!

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#41 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 07 September 2012 - 07:31 PM

Uh, yeah, a little. That's strange.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#42 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 14 September 2012 - 07:06 AM

Hey Jer so I was reading the instructions on installing this piece. Does it require removing sound deadening material? Is that what it means by "grinding away at the sound deadening material"?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#43 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 14 September 2012 - 07:23 AM

Hey Jer so I was reading the instructions on installing this piece. Does it require removing sound deadening material? Is that what it means by "grinding away at the sound deadening material"?


Yes, just a small area of the "sound insulating spray" that's stuck to the metal in that area.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#44 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 14 September 2012 - 07:41 AM

But removing that little bit won't effect noise coming into cabin correct?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#45 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 14 September 2012 - 08:25 AM

But removing that little bit won't effect noise coming into cabin correct?

Nooooo. You're removing an inch off the edge, at most.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#46 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 14 September 2012 - 08:39 AM

And since I'm getting the shelby trunk mat you guys sell, I'm assuming I could lay this bar right over it no problem?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#47 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Canada Region
  • 774 posts
  • Joined 27-December 09
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
Garage View Garage

Posted 14 September 2012 - 09:06 AM

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?

Next year I'll be putting the CS6 on a diet so this would definitely make the list :)
2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque.
2013 Fiat 500 Abarth Cabrio, Bianco, Black roof, fully loaded. 160hp, 170ft/lb torque.
Spending money I don't have on parts I don't need to impress people I don't know :)Steve

#48 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 14 September 2012 - 02:10 PM

And since I'm getting the shelby trunk mat you guys sell, I'm assuming I could lay this bar right over it no problem?

Yup!

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#49 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Canada Region
  • 774 posts
  • Joined 27-December 09
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
Garage View Garage

Posted 17 September 2012 - 05:05 PM

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?

Next year I'll be putting the CS6 on a diet so this would definitely make the list :)


Maybe my question was so well hidden ......... Will the rear seat deletes be made to fit convertibles as well as coupes?

2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque.
2013 Fiat 500 Abarth Cabrio, Bianco, Black roof, fully loaded. 160hp, 170ft/lb torque.
Spending money I don't have on parts I don't need to impress people I don't know :)Steve

#50 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 18 September 2012 - 06:39 PM

Maybe my question was so well hidden ......... Will the rear seat deletes be made to fit convertibles as well as coupes?


I have to do some homework on that. Sorry for the wait!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#51 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Canada Region
  • 774 posts
  • Joined 27-December 09
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
Garage View Garage

Posted 18 September 2012 - 09:34 PM

I have to do some homework on that. Sorry for the wait!


Jer

Ok, thanks - I'm sure there's a market for a convertible version.
2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque.
2013 Fiat 500 Abarth Cabrio, Bianco, Black roof, fully loaded. 160hp, 170ft/lb torque.
Spending money I don't have on parts I don't need to impress people I don't know :)Steve

#52 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 19 September 2012 - 08:41 AM

Oh I forgot to ask. What is this made out of and how much does it weigh?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#53 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 19 September 2012 - 08:57 AM

Ok, thanks - I'm sure there's a market for a convertible version.


I just checked. There is no convertible version, unfortunately.
Again, sorry for the delay getting back to you.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#54 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,237 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 19 September 2012 - 08:57 AM

Oh I forgot to ask. What is this made out of and how much does it weigh?


It is steel, and weighs 5 pounds after powdercoating.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#55 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,586 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 19 September 2012 - 03:19 PM

Rear shock tower brace arrived yesterday and I installed it today! No issue with the install, easiest to work from inside the cabin through the back seats. The brace adds a nice touch to the trunk, it's out of the way but very visible. As a non-professional, I doubt I'll notice any improvement in handling, but hey, it's in there!

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#56 OFFLINE   shelby001

shelby001

    shelby001

  • Team Shelby Regional Director
  • 14,423 posts
  • Joined 07-May 06
  • Region:Canada
  • Interests:65 G.T coupe
    65 vert
    68 Shelby G.T 500
    07`SHelby

Posted 19 September 2012 - 03:39 PM

Rear shock tower brace arrived yesterday and I installed it today! No issue with the install, easiest to work from inside the cabin through the back seats. The brace adds a nice touch to the trunk, it's out of the way but very visible. As a non-professional, I doubt I'll notice any improvement in handling, but hey, it's in there!

Sam


Pictures would be nice.

#57 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,915 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 19 September 2012 - 04:21 PM

:camera: ,,PLEASE guys ,let's post some pictures of these installs ,,Thanks . B) ,,,when I got mine ,,I'm going to have it painted at the same body shop that did my hood ,,have it painted ( screaming yellow ) paint code ,, to match my hood ,,maybe having them painted to match the car color would be a nice touch . just saying .

Edited by richard m.switzer, 19 September 2012 - 04:25 PM.

000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#58 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,586 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 19 September 2012 - 04:36 PM

I'll take a couple of pics tomorrow, but to tell the truth, it won't look much different than the "trunk view" here:

https://www.shelbyst...ode=S5M-20201-U

Instructions were minimal, but accurate and got the job done.

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#59 ONLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,526 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 20 September 2012 - 09:56 AM

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?



As I suspected, Ford Racing beats the competition;

http://www.fordracin...tKeyField=22836

Posted Image
It says "Fits 2011-2013" but I'm thinking it would fit earlier models too. Not any difference in the rear seat pan that I know of....

  • Fits 2011-2013 Mustang GT Coupe
  • Original equipment on 2012 Mustang Boss 302 Laguna Seca
  • Includes X-Brace, Trunk-end trim panel and center luggage cover
  • No cutting or welding required
  • Kit includes all hardware
  • Off Road Use Only!

Phill

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#60 OFFLINE   shelby001

shelby001

    shelby001

  • Team Shelby Regional Director
  • 14,423 posts
  • Joined 07-May 06
  • Region:Canada
  • Interests:65 G.T coupe
    65 vert
    68 Shelby G.T 500
    07`SHelby

Posted 20 September 2012 - 10:31 AM

I'll take a couple of pics tomorrow, but to tell the truth, it won't look much different than the "trunk view" here:

https://www.shelbyst...ode=S5M-20201-U

Instructions were minimal, but accurate and got the job done.

Sam


Ya but its hard to see in that picture whether it is below the rise in the trunk or above it???????????????




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users