Jump to content





Photo

NEW! Shelby Rear Shock Tower Brace!


  • Please log in to reply
140 replies to this topic

#61 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 20 September 2012 - 11:12 AM

If I decide to not sell my shelby I'll be getting this. I wonder how much more noise would be heard inside the car with this installed? I've never driven in a boss LS. Maybe I should go pay my dealership a visit since they have one.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#62 OFFLINE   patrickshelby

patrickshelby

    Team Shelby Member

  • World-Wide Region
  • 944 posts
  • Joined 20-October 08
  • Region:European Union

Posted 20 September 2012 - 11:35 AM

SVT13 are you sure you don't need a doctor? or a psy... :hysterical:
BTW, where are the pictures everyone is waiting to see...of your SHELBY.

#63 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 20 September 2012 - 02:23 PM

SVT13 are you sure you don't need a doctor? or a psy... :hysterical:
BTW, where are the pictures everyone is waiting to see...of your SHELBY.


In the photo gallery duh.

I'm actually going to be doing a huge build thread in like 2-3 weeks like alex does so there will be lots of pics then too.

Edited by svt13, 20 September 2012 - 04:03 PM.

2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#64 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,575 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 20 September 2012 - 03:33 PM

Pics as promised:

Driver's side from in cab:
Posted Image

Passenger side from in cab:
Posted Image

Driver's side from in trunk:
Posted Image

Passenger side from in trunk:
Posted Image

Installed:
Posted Image

Hope those help!

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#65 OFFLINE   AndyGJ

AndyGJ

    SGT Owner

  • South Atlantic Region
  • 1,069 posts
  • Joined 22-January 08
  • Region:South Atlantic

Posted 20 September 2012 - 06:11 PM

Sweet!!....nice install Sam.

But dang-it! Here is another mod to add to my wish list.

Someone tell Jer to slow down with all these new products....my time and my wallet can't keep up with him!


Andy.

Present Mustang:
2008 Shelby GT Convertible #1676

Mods Installed:
BF Goodrich g-Force Sport COMP-2 Tires (275/40/R18 Front & Rear)
CDC Sequential Tail Lights
FRPP GT500KR Axleback Mufflers
FRPP GT500KR 18" Rims
FRPP 62mm Throttle Body
FRPP Boss 302 Low Expansion Brakelines
Hawk HPS Brake Pads (front & rear)
JBA Tuned Length Ceramic Shorty Headers
LD's Performance Custom Tuning (91 & 93 Octane) w/SCT-X3 Tuner
Redline Hood Struts (w/update kit)
Royal Purple Synthetic Oil 5w20

Royal Purple Differential Gear Lub

Royal Purple Manual Transmission Fluid
Shelby Lower Radiator Grill Insert - Black
Shelby 4.6L Valve Covers
Shelby GT Berg Snake Faux Gas Cap
Shelby GT Berg Snake Front Floor Mats & Trunk Mat
Shelby Plain Rear Seat Floor Mats
Shelby Billet Engine Cap Set
Shelby Billet Fusebox Cover
Shelby Transmission Cooler Scoop
Shelby Front Brake Duct Cooling Kit

Shelby Fays2 Watts Link
Performance Brake Slotted & Cross Drilled Rotors (front & rear)
Ford Motorcraft DOT4 Brake Fluid
Steeda CAI Intake Elbow w/Black Tube
Steeda Motor Mounts (red inserts)
Steeda Under Drive Pulley

Prior Mustangs:

1968 Mustang Coupe - Midnight Blue
1966 Mustang Convertible 289v2 - Red w/black top & interior (still in the family)
1973 Mustang Convertible 351W - Poppy Red w/black top & interior - MCA Senior Division Grand National Retired Winner
1989 Mustang Hatchback 5.0 w/5spd - 25th Anniversary - Red w/red & black interior


#66 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,912 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 20 September 2012 - 06:45 PM

Pics as promised:

Driver's side from in cab:
Posted Image

Passenger side from in cab:
Posted Image

Driver's side from in trunk:
Posted Image

Passenger side from in trunk:
Posted Image

Installed:
Posted Image

Hope those help!

Sam

Ya ,cool ,,, thanks for the new pictures ,,I'm in now for sure . :yahoo:
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#67 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 20 September 2012 - 07:48 PM

Pics as promised:

Driver's side from in cab:
Posted Image

Passenger side from in cab:
Posted Image

Driver's side from in trunk:
Posted Image

Passenger side from in trunk:
Posted Image

Installed:
Posted Image

Hope those help!

Sam



Sam,

Great post - thanks so much!
Hey, go pick out a shirt from the website, and let me know - It's on me, I appreciate your effort!



Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#68 OFFLINE   EL SHELBY

EL SHELBY

    EL SHELBY

  • Members
  • PipPip
  • 3,230 posts
  • Joined 15-March 09
  • Region:Southern Plains

Posted 20 September 2012 - 07:54 PM

Curious. Does anyone think it would be silly to wire a strip of LEDs under the brace to shine through the Shelby cut out?
08SGT0343 Fueled with CS branded pixie dust ground from the asphault of the Mausaon Straight and defeated Ferrari's.
Posted Image

#69 OFFLINE   Freak

Freak

    Team Shelby Member

  • Great Lakes Region
  • 586 posts
  • Joined 30-April 07
  • Region:Decline
  • Interests:Fast Cars, Firearms, Photography and my puppy dog.

Posted 20 September 2012 - 08:12 PM

Curious. Does anyone think it would be silly to wire a strip of LEDs under the brace to shine through the Shelby cut out?


I think that would be pretty neat looking actually.
Freedom exists because there are men and women willing to do terrible things to those who would threaten it.

It is the Marines, Soldiers, Sailors and Airmen who salute the flag, who serve beneath the flag, and who's coffins are draped by the flag, that allow the protester to burn the flag.

I'm not a Shelby guy, I'm not a Mustang guy, I'm not a Camaro or Chevy guy, and I'm not a Dodge guy. I'm a car guy. I don't care what the fender says, if it looks cool, is fast and fun to drive, It can be called a Poo-master 1000 for all I care. I'll still like it.


http://www.facebook.com/BanTheFordMustang

#70 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 20 September 2012 - 08:12 PM

Curious. Does anyone think it would be silly to wire a strip of LEDs under the brace to shine through the Shelby cut out?


I bet that would look cool. Nice idea!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#71 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 20 September 2012 - 08:14 PM

In the photo gallery duh.

I'm actually going to be doing a huge build thread in like 2-3 weeks like alex does so there will be lots of pics then too.


Can't wait to see it. Thanks!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#72 OFFLINE   patrickshelby

patrickshelby

    Team Shelby Member

  • World-Wide Region
  • 944 posts
  • Joined 20-October 08
  • Region:European Union

Posted 20 September 2012 - 10:27 PM

In the photo gallery duh.

I'm actually going to be doing a huge build thread in like 2-3 weeks like alex does so there will be lots of pics then too.

AHHHH!!!!! That is good news.
A huge build? But you hesitate selling your GT500?
So it's either "I do it all" or "I don't think it will have much effect and I'd rather sell it"
I understand.

#73 OFFLINE   AndyGJ

AndyGJ

    SGT Owner

  • South Atlantic Region
  • 1,069 posts
  • Joined 22-January 08
  • Region:South Atlantic

Posted 21 September 2012 - 02:33 AM

Sam,

Great post - thanks so much!
Hey, go pick out a shirt from the website, and let me know - It's on me, I appreciate your effort!



Jer


Jer - I just want to confirm, these units will fit a convertible...it is the yet-to-be-released rearseat delete/cross brace that will not fit a convertible, correct?

I started to pull back my side panels the other day to take a peak at it, but decided to wait until daylight this weekend to take a look.

Thanks,
Andy.

Present Mustang:
2008 Shelby GT Convertible #1676

Mods Installed:
BF Goodrich g-Force Sport COMP-2 Tires (275/40/R18 Front & Rear)
CDC Sequential Tail Lights
FRPP GT500KR Axleback Mufflers
FRPP GT500KR 18" Rims
FRPP 62mm Throttle Body
FRPP Boss 302 Low Expansion Brakelines
Hawk HPS Brake Pads (front & rear)
JBA Tuned Length Ceramic Shorty Headers
LD's Performance Custom Tuning (91 & 93 Octane) w/SCT-X3 Tuner
Redline Hood Struts (w/update kit)
Royal Purple Synthetic Oil 5w20

Royal Purple Differential Gear Lub

Royal Purple Manual Transmission Fluid
Shelby Lower Radiator Grill Insert - Black
Shelby 4.6L Valve Covers
Shelby GT Berg Snake Faux Gas Cap
Shelby GT Berg Snake Front Floor Mats & Trunk Mat
Shelby Plain Rear Seat Floor Mats
Shelby Billet Engine Cap Set
Shelby Billet Fusebox Cover
Shelby Transmission Cooler Scoop
Shelby Front Brake Duct Cooling Kit

Shelby Fays2 Watts Link
Performance Brake Slotted & Cross Drilled Rotors (front & rear)
Ford Motorcraft DOT4 Brake Fluid
Steeda CAI Intake Elbow w/Black Tube
Steeda Motor Mounts (red inserts)
Steeda Under Drive Pulley

Prior Mustangs:

1968 Mustang Coupe - Midnight Blue
1966 Mustang Convertible 289v2 - Red w/black top & interior (still in the family)
1973 Mustang Convertible 351W - Poppy Red w/black top & interior - MCA Senior Division Grand National Retired Winner
1989 Mustang Hatchback 5.0 w/5spd - 25th Anniversary - Red w/red & black interior


#74 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • South Atlantic Region
  • 1,575 posts
  • Joined 18-January 08
  • Region:South Atlantic
  • Interests:Planes, cars, good times, good friends!

Posted 21 September 2012 - 03:19 AM

Sam,

Great post - thanks so much!
Hey, go pick out a shirt from the website, and let me know - It's on me, I appreciate your effort!



Jer


Hey Jer - Happy to help - but more than that, really happy to see your involvement in SPP, you're doing a great job!

Sam

Oh, one of these in an XL would be nice if it's not to much! (http://www.shelbysto...uct-p/ws-29.htm)
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#75 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 21 September 2012 - 05:39 AM

Jer - I just want to confirm, these units will fit a convertible...it is the yet-to-be-released rearseat delete/cross brace that will not fit a convertible, correct?

I started to pull back my side panels the other day to take a peak at it, but decided to wait until daylight this weekend to take a look.

Thanks,
Andy.


Yes, exactly. We test-fit the rear shock tower brace to a convertible just to be sure.
And the only impediment for the upcoming X-brace fit is the fact that there is no rear-seat delete kit available for them. Otherwise, it may be a possibility.
I haven't given up on that just yet. I would love to be able to take care of my 'vert friends!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#76 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 21 September 2012 - 06:20 AM

AHHHH!!!!! That is good news.
A huge build? But you hesitate selling your GT500?
So it's either "I do it all" or "I don't think it will have much effect and I'd rather sell it"
I understand.


You know how I roll lol :). Right now I'm looking into options with the build. I'm now debating just not selling my shelby because lets be honest its a pretty damn fast car. So in 4-5 years instead of selling it I'm debating just buying another car to DD. Like a 3 series or something equivalent during that time frame. I honestly don't think we are going to be getting too many more of these cars at this price. I think they said by 2020 we have to be at 50 mpg or something? And in the next couple years some other law is getting passed for cars so cars like this shelby won't even be allowed to get made by then without being able to adhere to the new laws?

Right now I'm looking into corravagio interior for this car. But I have to see how much it cost since its pricy stuff but the quality is second to none.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#77 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 21 September 2012 - 06:52 AM

Hey Jer - Happy to help - but more than that, really happy to see your involvement in SPP, you're doing a great job!

Sam

Oh, one of these in an XL would be nice if it's not to much! (http://www.shelbysto...uct-p/ws-29.htm)


Thanks!
Your shirt is being sent out with your new brake duct kit.

Enjoy!

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#78 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 21 September 2012 - 08:20 AM

Jer speaking of brake duct kit. Is the one you used on the 13 super snake a new one? Or can we buy that for a 13 shelby?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#79 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 21 September 2012 - 08:22 AM

Jer speaking of brake duct kit. Is the one you used on the 13 super snake a new one? Or can we buy that for a 13 shelby?


I'll find out for you.
BTW, we are still awaiting parts to make the GT500 version of the brake duct kit available.


Jer

Edited by Jer, 21 September 2012 - 08:25 AM.

2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#80 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 21 September 2012 - 08:52 AM

I'll find out for you.
BTW, we are still awaiting parts to make the GT500 version of the brake duct kit available.


Jer


Thank you
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#81 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 21 September 2012 - 10:33 PM

Thank you


You're welcome!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#82 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,410 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 09 October 2012 - 06:36 AM

Installed....It looks nice!! B) Attached File  20121009_065253.jpg   147.86KB   111 downloads

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#83 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 09 October 2012 - 07:20 AM

Installed....It looks nice!! B) Attached File  20121009_065253.jpg   147.86KB   111 downloads


Nice!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#84 OFFLINE   MJN

MJN

    Team Shelby Member

  • Great Lakes Region
  • 691 posts
  • Joined 12-May 12
  • Region:Great Lakes
Garage View Garage

Posted 09 October 2012 - 07:53 AM

Looks good I'm going have to get me one of these with all other things want lol, add to wish list

12 GT500 Blk Stripe DeleteBorla Cat back, JLT carbon fiber intake and splash guards, 3M Clear Bra, Kenny Brown Matrix Brace, KB custom coil overs and rear suspension set up, AFCO Pro H/E, MGW Shifter, Shelby Oil Separator

AMSOIL Dealer


#85 OFFLINE   Mustangcollector

Mustangcollector

    Team Shelby Member

  • Members
  • Pip
  • 151 posts
  • Joined 25-March 12
  • Region:Northeast
  • Interests:Family, Shelbys and Mustangs!

Posted 09 October 2012 - 03:44 PM

Someone tell Jer to slow down with all these new products....my time and my wallet can't keep up with him!


You got that right. I ordered a KR leather center console cover and the KR fuel door yesterday and found out this morning that the shifter ball Robert got for us is finally in stock. And, now that I see the great pictures of the rear brace installed THAT'S on my wish list. Oh yeah, and then I'll need LEDs for that because that'll be cool too.

My eyes can definitely keep up, but like others my wallet cannot! Hey, though, I'm not complaining...nothing better to spend hard earned money on than gold and Shelby items.

In all seriousness, thanks for our efforts Jer. We all appreciate it.
1967 Mustang Coupe - Black
1987 Mustang LX Convertible - Black
1965 Mustang Coupe - Dynasty Green
2010 Mustang GT Convertible - Candy Red
2012 Mustang GT/CS Convertible - Black
2008 Shelby GT500KR - Black

#86 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 09 October 2012 - 08:26 PM

In all seriousness, thanks for our efforts Jer. We all appreciate it.


LOL! You're welcome!

Good problem to have, right?


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#87 OFFLINE   Pig

Pig

    Team Shelby New Member

  • South Atlantic Region
  • 415 posts
  • Joined 19-March 07
  • Region:Decline

Posted 09 October 2012 - 11:04 PM

I hate to ask, but do you know if it will fit a vert with the JL Audio stealthbox? I need some chassis stiffening, but I gotta have my tunes also...
2007 Torch Red Shelby GT500 Convertible - Born 11/15/06.
# 982 of 2695 Convertibles, # 330 of 809 Torch Red Convertibles
Tuned by Justin @ VMP - 525 RWHP/500 RWTQ, JLT Carbon Fiber Intake & goodies, FRPP Springs, Fiore Billet LCAs, Steeda UCA, Panhard rod & brace, CDC Light bar, Shelby "Fifty Years" Alcoas 20x10s all around, Shelby signed dash plaque & airbag cover/billet fluid caps/fusebox cover/floor mats/sill plates & inserts, Steeda strut & nut caps, Clarion & JLAudio NAV/DVD/TV/MP3/Sirius/iPod AV system, side mirror covers, shorty antenna, heated seats, Stangmods HIDs, etc., etc., etc.

#88 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 10 October 2012 - 05:25 AM

I hate to ask, but do you know if it will fit a vert with the JL Audio stealthbox? I need some chassis stiffening, but I gotta have my tunes also...


I don't know the Stealthbox very well, but if you post some pix of your trunk (with as little carpet as possible covering things), we can figure it out.


Thanks,

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#89 OFFLINE   Pig

Pig

    Team Shelby New Member

  • South Atlantic Region
  • 415 posts
  • Joined 19-March 07
  • Region:Decline

Posted 16 October 2012 - 09:33 PM

Sorry it took so long for pics, but here they are. The shock mounts pretty much line up with the leading edge of the stealthbox.

Posted Image

Posted Image

Posted Image
2007 Torch Red Shelby GT500 Convertible - Born 11/15/06.
# 982 of 2695 Convertibles, # 330 of 809 Torch Red Convertibles
Tuned by Justin @ VMP - 525 RWHP/500 RWTQ, JLT Carbon Fiber Intake & goodies, FRPP Springs, Fiore Billet LCAs, Steeda UCA, Panhard rod & brace, CDC Light bar, Shelby "Fifty Years" Alcoas 20x10s all around, Shelby signed dash plaque & airbag cover/billet fluid caps/fusebox cover/floor mats/sill plates & inserts, Steeda strut & nut caps, Clarion & JLAudio NAV/DVD/TV/MP3/Sirius/iPod AV system, side mirror covers, shorty antenna, heated seats, Stangmods HIDs, etc., etc., etc.

#90 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,234 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 17 October 2012 - 05:13 AM

In the last photo, are you pulling the box out with your hand, or is that where the box sits?
Simply put, if the shock towers have a "clear line of sight" to each other, at least 1 inch X 1 inch wide, the brace will fit.
If the box blocks the top of the shock towers from "seeing" each other, it's a no-go.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users