Jump to content





NEW! Shelby Rear Shock Tower Brace!


  • Please log in to reply
140 replies to this topic

#41 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 07 September 2012 - 07:31 PM

Uh, yeah, a little. That's strange.

Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#42 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 14 September 2012 - 07:06 AM

Hey Jer so I was reading the instructions on installing this piece. Does it require removing sound deadening material? Is that what it means by "grinding away at the sound deadening material"?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#43 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 14 September 2012 - 07:23 AM

View Postsvt13, on 14 September 2012 - 07:06 AM, said:

Hey Jer so I was reading the instructions on installing this piece. Does it require removing sound deadening material? Is that what it means by "grinding away at the sound deadening material"?

Yes, just a small area of the "sound insulating spray" that's stuck to the metal in that area.

Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#44 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 14 September 2012 - 07:41 AM

But removing that little bit won't effect noise coming into cabin correct?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#45 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 14 September 2012 - 08:25 AM

View Postsvt13, on 14 September 2012 - 07:41 AM, said:

But removing that little bit won't effect noise coming into cabin correct?
Nooooo. You're removing an inch off the edge, at most.


Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#46 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 14 September 2012 - 08:39 AM

And since I'm getting the shelby trunk mat you guys sell, I'm assuming I could lay this bar right over it no problem?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#47 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Team Shelby Club Member
  • 708 posts
  • Joined 27-December 09
  • Gender:Male
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
  • Vehicle:CS6/CS6
Garage View Garage

Posted 14 September 2012 - 09:06 AM

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?

Next year I'll be putting the CS6 on a diet so this would definitely make the list :)
2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.
All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque
2008 Ford Explorer Sport Trac Adrenalin, 4.6L V8, AWD, Silver Birch Metallic, Charcoal Leather Interior, Fully Loaded, K&N Typhoon Air Intake, Magnaflow Muffler with Resonator Delete, Infinity Reference 6832's Front & Rear, PIAA Xtreme White headlight bulbs, 14" shorty antenna, 20x9 Shelby Razors for summer use.
Spending money I don't have on parts I don't need to impress people I don't know :)

Steve

#48 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 14 September 2012 - 02:10 PM

View Postsvt13, on 14 September 2012 - 08:39 AM, said:

And since I'm getting the shelby trunk mat you guys sell, I'm assuming I could lay this bar right over it no problem?
Yup!

Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#49 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Team Shelby Club Member
  • 708 posts
  • Joined 27-December 09
  • Gender:Male
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
  • Vehicle:CS6/CS6
Garage View Garage

Posted 17 September 2012 - 05:05 PM

View PostUK PONY, on 14 September 2012 - 09:06 AM, said:

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?

Next year I'll be putting the CS6 on a diet so this would definitely make the list :)

Maybe my question was so well hidden ......... Will the rear seat deletes be made to fit convertibles as well as coupes?

2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.
All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque
2008 Ford Explorer Sport Trac Adrenalin, 4.6L V8, AWD, Silver Birch Metallic, Charcoal Leather Interior, Fully Loaded, K&N Typhoon Air Intake, Magnaflow Muffler with Resonator Delete, Infinity Reference 6832's Front & Rear, PIAA Xtreme White headlight bulbs, 14" shorty antenna, 20x9 Shelby Razors for summer use.
Spending money I don't have on parts I don't need to impress people I don't know :)

Steve

#50 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 18 September 2012 - 06:39 PM

View PostUK PONY, on 17 September 2012 - 05:05 PM, said:

Maybe my question was so well hidden ......... Will the rear seat deletes be made to fit convertibles as well as coupes?

I have to do some homework on that. Sorry for the wait!


Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#51 OFFLINE   UK PONY

UK PONY

    Team Shelby Member

  • Team Shelby Club Member
  • 708 posts
  • Joined 27-December 09
  • Gender:Male
  • Region:Canada
  • Interests:Cars, Travelling, Photography, Cycling, Boating, Walking
  • Vehicle:CS6/CS6
Garage View Garage

Posted 18 September 2012 - 09:34 PM

View PostJer, on 18 September 2012 - 06:39 PM, said:



I have to do some homework on that. Sorry for the wait!


Jer
Ok, thanks - I'm sure there's a market for a convertible version.
2005 Turn2 CS6 Vert, Sonic Blue, First Officially Licensed CS6 Leather Interior Upgrade Kit, Black Top, IUP, Shaker 500 - believed to be 1 of 1 with this combination.
All the usual Turn2 CS6 goodies plus, shaftmasters aluminum driveshaft, JBA ceramic coated headers, antenna delete, CDC sequential tailights, Agent 47 door mirrors, autographed airbag cover, Kenwood DDX6019 double DIN DVD head unit with Nav & Sirius, Infinity Reference 6832cf's Front & Rear, Shelby Kicker Subs and a few dress up pieces. 370hp, 377ft/lb torque
2008 Ford Explorer Sport Trac Adrenalin, 4.6L V8, AWD, Silver Birch Metallic, Charcoal Leather Interior, Fully Loaded, K&N Typhoon Air Intake, Magnaflow Muffler with Resonator Delete, Infinity Reference 6832's Front & Rear, PIAA Xtreme White headlight bulbs, 14" shorty antenna, 20x9 Shelby Razors for summer use.
Spending money I don't have on parts I don't need to impress people I don't know :)

Steve

#52 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Gender:Male
  • Region:Northeast
  • Vehicle:GT500

Posted 19 September 2012 - 08:41 AM

Oh I forgot to ask. What is this made out of and how much does it weigh?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#53 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 19 September 2012 - 08:57 AM

View PostUK PONY, on 18 September 2012 - 09:34 PM, said:

Ok, thanks - I'm sure there's a market for a convertible version.

I just checked. There is no convertible version, unfortunately.
Again, sorry for the delay getting back to you.


Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#54 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,811 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 19 September 2012 - 08:57 AM

View Postsvt13, on 19 September 2012 - 08:41 AM, said:

Oh I forgot to ask. What is this made out of and how much does it weigh?

It is steel, and weighs 5 pounds after powdercoating.

Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#55 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • Team Shelby Club Member
  • 1,316 posts
  • Joined 18-January 08
  • Gender:Male
  • Interests:Planes, cars, good times, good friends!

Posted 19 September 2012 - 03:19 PM

Rear shock tower brace arrived yesterday and I installed it today!  No issue with the install, easiest to work from inside the cabin through the back seats.  The brace adds a nice touch to the trunk, it's out of the way but very visible.  As a non-professional, I doubt I'll notice any improvement in handling, but hey, it's in there!

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#56 OFFLINE   shelby001

shelby001

    shelby001

  • Team Shelby Regional Director
  • 12,293 posts
  • Joined 07-May 06
  • Gender:Male
  • Region:Canada
  • Interests:65 G.T coupe
    65 vert
    68 Shelby G.T 500
    07`SHelby
  • Vehicle:GT500

Posted 19 September 2012 - 03:39 PM

View Post2007_Shelby_GT, on 19 September 2012 - 03:19 PM, said:

Rear shock tower brace arrived yesterday and I installed it today!  No issue with the install, easiest to work from inside the cabin through the back seats.  The brace adds a nice touch to the trunk, it's out of the way but very visible.  As a non-professional, I doubt I'll notice any improvement in handling, but hey, it's in there!

Sam

Pictures would be nice.

#57 ONLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Team Shelby Club Member
  • 1,706 posts
  • Joined 06-January 08
  • Gender:Male
  • Region:Mississippi Valley
  • Vehicle:Mustang

Posted 19 September 2012 - 04:21 PM

:camera: ,,PLEASE guys ,let's post some pictures of these installs ,,Thanks . B) ,,,when I got mine ,,I'm going to have it painted at the same body shop that did my hood ,,have it painted ( screaming yellow ) paint code ,, to match my hood ,,maybe having them painted to match the car color would be a nice touch . just saying .

Edited by richard m.switzer, 19 September 2012 - 04:25 PM.

000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg,
Picture 011.jpg

41.gif

#58 OFFLINE   2007_Shelby_GT

2007_Shelby_GT

    Certified Shelby Nut

  • Team Shelby Club Member
  • 1,316 posts
  • Joined 18-January 08
  • Gender:Male
  • Interests:Planes, cars, good times, good friends!

Posted 19 September 2012 - 04:36 PM

I'll take a couple of pics tomorrow, but to tell the truth, it won't look much different than the "trunk view" here:

https://www.shelbyst...ode=S5M-20201-U

Instructions were minimal, but accurate and got the job done.

Sam
AKA:
Posted Image
My Trademark - Don't even think about using it!
In Memory Of Willy T

#59 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 5,963 posts
  • Joined 31-October 09
  • Gender:Male
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
  • Vehicle:GT500

Posted 20 September 2012 - 09:56 AM

View PostUK PONY, on 14 September 2012 - 09:06 AM, said:

I love the idea that there's a rear seat X-brace coming out - presumably you guys will be supplying the ellusive rear seat delete for 05-09 verts with this, not just for the coupes?


As I suspected, Ford Racing beats the competition;

http://www.fordracin...tKeyField=22836

Posted Image
It says "Fits 2011-2013" but I'm thinking it would fit earlier models too. Not any difference in the rear seat pan that I know of....

  • Fits 2011-2013 Mustang GT Coupe
  • Original equipment on 2012 Mustang Boss 302 Laguna Seca
  • Includes X-Brace, Trunk-end trim panel and center luggage cover
  • No cutting or welding required
  • Kit includes all hardware
  • Off Road Use Only!

Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY:  SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~

PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.

#60 OFFLINE   shelby001

shelby001

    shelby001

  • Team Shelby Regional Director
  • 12,293 posts
  • Joined 07-May 06
  • Gender:Male
  • Region:Canada
  • Interests:65 G.T coupe
    65 vert
    68 Shelby G.T 500
    07`SHelby
  • Vehicle:GT500

Posted 20 September 2012 - 10:31 AM

View Post2007_Shelby_GT, on 19 September 2012 - 04:36 PM, said:

I'll take a couple of pics tomorrow, but to tell the truth, it won't look much different than the "trunk view" here:

https://www.shelbyst...ode=S5M-20201-U

Instructions were minimal, but accurate and got the job done.

Sam

Ya but its hard to see in that picture whether it is below the rise in the trunk or above it???????????????




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users