Jump to content





Photo

The Shelby Forged Wheel Pre-Order Program is OVER!

alcoa forged 50th wheel super snake

  • Please log in to reply
100 replies to this topic

#61 OFFLINE   NMAv

NMAv

    Team Shelby Member

  • Members
  • PipPip
  • 1,001 posts
  • Joined 10-January 11
  • Region:Mountain
  • Interests:hockey, family, weight lifting, cars

Posted 09 October 2012 - 06:16 AM

Jer, I haven't seen an ETA on the wheels. Do you know if they will be in/ delivered by the holidays? Also, can ?I make arrangments to have mine shipped directly to Weldcraft?

~ NMAv

2011 highly modified Shelby GT500 with SVTPP (Kona Blue)


 


#62 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,223 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 09 October 2012 - 06:40 AM

Jer, I haven't seen an ETA on the wheels. Do you know if they will be in/ delivered by the holidays? Also, can ?I make arrangments to have mine shipped directly to Weldcraft?


Our published ETA is December. I expect everyone to have them by the Holidays.
As for shipping, we are only sending direct to customers - Our liability for delivery confirmation and the customer's QC approval neccessitates that.
If they went straight to Weldcraft, then you received them with a scratch or blemish, it would be tough to rectify.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#63 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 09 October 2012 - 06:56 AM

Jer, I haven't seen an ETA on the wheels. Do you know if they will be in/ delivered by the holidays? Also, can ?I make arrangments to have mine shipped directly to Weldcraft?


What is this weldcraft talk? I called them 2 days ago and they said they refused to touch these wheels.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#64 OFFLINE   NMAv

NMAv

    Team Shelby Member

  • Members
  • PipPip
  • 1,001 posts
  • Joined 10-January 11
  • Region:Mountain
  • Interests:hockey, family, weight lifting, cars

Posted 09 October 2012 - 07:02 AM

Well that stinks.

~ NMAv

2011 highly modified Shelby GT500 with SVTPP (Kona Blue)


 


#65 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 09 October 2012 - 07:59 AM

Well that stinks.


There is some other guy Eric Vaughn or something that will do it.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#66 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,354 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 09 October 2012 - 09:36 AM

There is some other guy Eric Vaughn or something that will do it.


Yeah, Weldcraft stopped widening the SS Alcoa's after damaging a few or getting too much run-out on some (I can't remember exactly).

Eric Vaughn does it and does it better (IMO) than Weldcraft.

Weldcraft adds a center section so there are two welds/beads around the circumference. EV uses a whole new inner section so there is only one weld/bead around the circumference, hence *potentially* stronger (or better worded, less (1/2) chance of failure).

And I think the prices were pretty close to each other.


Phill

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#67 OFFLINE   Evasive

Evasive

    2008 GT500

  • Members
  • PipPip
  • 514 posts
  • Joined 06-August 08

Posted 09 October 2012 - 02:22 PM

Plus, if anything happened, they could not get new ones. Weldcraft did an outstanding widening job on the used set I got here. They also fixed the curb rash and did a great job on the welds. Of course, I did have to buy one new rim but only because the MMS jerk that sold me the used set here failed to disclose how badly damaged one of the rims was...it was hit so hard that it was twisted and was a junk rim...not useable. Not at all repairable like I was told and no offer of even a partial refund. It's collecting dust in my garage.

Edited by Evasive, 09 October 2012 - 02:29 PM.

2008 Alloy Metallic w/Satin Silver Stripes. 650rwhp/630rwtq
2013 TVS
72mm L&M TB
L&M port-matched elbow
JLT 127mm carbon fiber CAI
Custom powdercoated and widened Alcoa's (20x11.75 rear and factory 20x10 front)
Toyo R888 315/30R20 rear tires; Conti DW 275/35ZR20 front tires

Metco idler pulley painted black
C&R heat exchnager
C&R radiator
H&R front/rear sways
FRPP springs
QA1 rear shocks

Griggs Torque Arm
Kenny Brown welded subframe connectors & jacking rails
Steeda adj panhard rod
3.73 gears w/FRPP low profile cover
Shelby SuperSnake JBA 3" manifold back exhaust
bunch of other stuff
Tuned by Jon Lund
Built by Power By The Hour


2008GT500.blogspot.com


Posted ImagePosted Image

#68 OFFLINE   500forme

500forme

    Founding Member of Team Shelby

  • Mountain Region
  • 359 posts
  • Joined 17-January 08
  • Region:Mountain
  • Interests:Water skiing, Boating, Dirt bikes, Desert Racing and Horses.

Posted 14 October 2012 - 05:55 AM

Jer, thanks so much for the Team Shelby email announcing the wheel run! Since I am not a regular visitor of the forum, I really appreciate the emails from you guys. I got my set of wheels ordered because of your great communications! Thanks again, Mark.
Proud Member Team 40th CSM#07XL0253
1 of Only 7 Blue Coupes Built with 725HP SS Option

Please visit www.actionrv.com

#69 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,354 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 14 October 2012 - 08:36 AM

Jer, thanks so much for the Team Shelby email announcing the wheel run! Since I am not a regular visitor of the forum, I really appreciate the emails from you guys.



I used to get the e-mail announcements all the time and they suddenly stopped. Sharon said to add my name in a box somewhere. I did and I still do not receive announcements.

And I've been a dues paying TS member since I first got on here (or close to it).

WHY can't I get them?????


ARGH!

Phill Pollard

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#70 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,223 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 14 October 2012 - 11:33 AM

I used to get the e-mail announcements all the time and they suddenly stopped. Sharon said to add my name in a box somewhere. I did and I still do not receive announcements.

And I've been a dues paying TS member since I first got on here (or close to it).

WHY can't I get them?????


ARGH!

Phill Pollard


I'll check, Phill.



Jer

Edited by Jer, 14 October 2012 - 11:34 AM.

2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#71 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,223 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 05:57 AM

I used to get the e-mail announcements all the time and they suddenly stopped. Sharon said to add my name in a box somewhere. I did and I still do not receive announcements.

And I've been a dues paying TS member since I first got on here (or close to it).

WHY can't I get them?????


ARGH!

Phill Pollard


PM sent.



Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#72 ONLINE   twobjshelbys

twobjshelbys

    Team Shelby Enthusiast

  • Members
  • PipPipPip
  • 6,985 posts
  • Joined 31-December 07
Garage View Garage

Posted 15 October 2012 - 11:40 AM

I used to get the e-mail announcements all the time and they suddenly stopped. Sharon said to add my name in a box somewhere. I did and I still do not receive announcements.


Same here. I went back and looked at the emails and did not find one that announced these. I'm not sure but I may have opted out since I don't own any Mustangs any more. Nonetheless, no email received about parts for quite some time. I do get other mailings so I know I remain in the system somewhere.
Cheers,
Tony

Motto: You can have fun going fast. ... but ... You don't have to go fast to have fun.

Current:
2006 Ford GT Heritage Edition, 650 RWHP, 600 FtLb torque.

Former:
CSX4005LA - Shelby Continuation Series Cobra. The most fun you can legally have, sitting in a chair, in public.
CSM08SGT2228 - Barrett Jackson Special Edition Convertible, 5-speed, Kenne Bell S/C. Carroll Shelby Children's Foundation Gift at Barrett-Jackson 2009 Scottsdale
CSM08SGT2247 - Barrett Jackson Special Edition Convertible, Automatic. Kenne Bell S/C installed. WHOOT!
Simple Mods: Electrochromic mirror with compass/temp/HomeLink, Ford HD Radio with iPod, lower billet grill insert, sequential tail lights.

#73 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,354 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 15 October 2012 - 11:52 AM

I do get other mailings so I know I remain in the system somewhere.


Same here. I get VERY limited mailings. I think the last couple were about the dog/animal donation deal.

But NOTHING on SPP sales, new items, etc. etc. etc.


Phill

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#74 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 15 October 2012 - 12:14 PM

I never got an email that announced these either. I did get the charity email though.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#75 OFFLINE   andrewnagle1964

andrewnagle1964

    Team Shelby Member

  • South Atlantic Region
  • 1,415 posts
  • Joined 21-February 08
  • Region:South Atlantic

Posted 15 October 2012 - 12:21 PM

I got an email on this that is how I knew about them and get emails pretty regualryl from SPP.

I have not opted out of any emails from Shelby, don't want to miss anything.

Andew
The Black 07SGT4986 (RIP April14, 2010) to the White 07SGT4623......thanks for the grace of God no one died.

#76 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,223 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 12:31 PM

Same here. I get VERY limited mailings. I think the last couple were about the dog/animal donation deal.

But NOTHING on SPP sales, new items, etc. etc. etc.


Phill


You've been added for sure now, Phill.
Anyone else who needs to be added, PM me your email address.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#77 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,354 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 15 October 2012 - 12:51 PM

You've been added for sure now, Phill.
Anyone else who needs to be added, PM me your email address
Jer


Thanks Jer.


Phill

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#78 OFFLINE   AzSideWinder

AzSideWinder

    Team Shelby New Member

  • Mountain Region
  • 100 posts
  • Joined 04-August 11
  • Region:Mountain

Posted 16 October 2012 - 08:27 AM

Can I change the 3 9 inch wheels and 3 10 inch wheels for 6 10 inch wheels? I was under the impression 10's would rub on the front.

Customer ID: 25052
Order Number: 64953
Order Date: 10/04/2012

Edited by AzSideWinder, 16 October 2012 - 08:28 AM.

Posted Image

#79 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,223 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 16 October 2012 - 02:21 PM

Can I change the 3 9 inch wheels and 3 10 inch wheels for 6 10 inch wheels? I was under the impression 10's would rub on the front.

Customer ID: 25052
Order Number: 64953
Order Date: 10/04/2012


We can't allow changes to orders at this point, as we allotted based on wheel size desired.
When you are contacted to complete your order, we will do our best to accommodate.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#80 OFFLINE   Snoopy49

Snoopy49

    Team Shelby Member

  • Members
  • PipPip
  • 1,262 posts
  • Joined 18-May 12
  • Region:Pacific Coast

Posted 20 October 2012 - 10:24 AM

Do the 2012 TPMS sensors work with the 2013 GT500 system? I was going to order a set, but wanted to make sure they work. Will the 2013 GT500 TPMS sensors work on these new Alcoa's?

2013 GT500 Coupe - HPW with Black Stripes - SVT PP - SVT TP - Redline Hood Struts - Yeager Bros Front Gravel Guards - Bob's Oil Separator -AirAid Blue Non-Oiled Air Filter - CarboTech 1521 Ceramic Brake Pads - Resonator Eliminator Kit - WeatherTech Floor Mats
Car Ordered 5-27-2012 - Build Date 1-14-2013 - Delivered 1-26-2013


#81 OFFLINE   Cobra99

Cobra99

    Proudly representing the SHELBY name in CANADA

  • Members
  • Pip
  • 149 posts
  • Joined 03-July 12
  • Region:Canada

Posted 29 October 2012 - 11:19 AM

Do the 2012 TPMS sensors work with the 2013 GT500 system? I was going to order a set, but wanted to make sure they work. Will the 2013 GT500 TPMS sensors work on these new Alcoa's?


I am also wondering this.

#82 OFFLINE   sebecke1

sebecke1

    Team Shelby Member #198

  • South Atlantic Region
  • 143 posts
  • Joined 12-May 06
  • Region:South Atlantic

Posted 14 December 2012 - 07:42 PM

I had a set of the original Alcoas, and the "Shelby Forged" lettering was a real pain to clean and keep clean. Anybody have any ideas of what could be done to help keep the letters clean or make them easier to clean? Thanks, Scott.

#83 OFFLINE   B Shelby

B Shelby

    Team Shelby Member

  • Great Lakes Region
  • 775 posts
  • Joined 19-May 07
  • Region:Great Lakes
  • Interests:Guitars, cars, racing and fishing

Posted 14 December 2012 - 08:25 PM

A tooth brush works great
Performance white/black
800 hp polished KB

Super Snake completed March 17 2009

#84 OFFLINE   NordicShelby

NordicShelby

    Team Shelby Member

  • Northern Plains Region
  • 4,191 posts
  • Joined 24-June 08
  • Region:Northern Plains

Posted 15 December 2012 - 06:03 AM

I thought that S/A was going to have extras to sell around Christmas? I don't plan on buying them since 20's do not work so well on the track.

#85 OFFLINE   speedrx

speedrx

    Team Shelby New Member

  • Members
  • Pip
  • 262 posts
  • Joined 22-August 12
  • Region:Other

Posted 15 December 2012 - 06:08 AM

It looks like set are starting to make their way to EBAY and are already selling at a premium between $3.5K - $4K. I think as direct supply depletes, prices will continue to increase.

#86 OFFLINE   trevor08gt

trevor08gt

    Team Shelby New Member

  • Members
  • Pip
  • 71 posts
  • Joined 29-September 12
  • Region:Other
  • Interests:Mustangs!

Posted 15 December 2012 - 06:23 AM

What's sad is blueovalindustries is an eBay username selling a set at 4000. I hope they aren't a Shelby supplier or anything.

2011 GT/CS

GT/CS

 


#87 OFFLINE   trevor08gt

trevor08gt

    Team Shelby New Member

  • Members
  • Pip
  • 71 posts
  • Joined 29-September 12
  • Region:Other
  • Interests:Mustangs!

Posted 15 December 2012 - 06:25 AM

Oh and they are also selling them for that much on their website.

2011 GT/CS

GT/CS

 


#88 OFFLINE   2010KonaBlueGT

2010KonaBlueGT

    There's room at the top. Space is limited...RSVP!

  • Members
  • PipPipPip
  • 7,354 posts
  • Joined 31-October 09
  • Region:Mountain
  • Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!

Posted 15 December 2012 - 12:04 PM

A tooth brush works great


That's what I've always used too.

Get a soft bristle tooth brush, not a firm one. And they're cheap. I keep 2 or 3 "new in the package" tooth brushes in my detail bucket.



Phill

2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover


CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet Dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford GT Blue Cam Covers - Polished Billet COP & Oil Filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Tubular K-Member Subframe - Tubular A-arms - CS S1000 Billet Aluminum Transmission Crossmember - Seat Harness Bar - 6S Extreme Rear Brakes - 6S Extreme Front Brakes - GT500KR Front Brake Cooling Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - GT500KR Rear Axle Reservoir - Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear GT500KR Winged Boot F1 Supercar Tires~ Raptor Shift Light

PURCHASED AND AWAITING INSTALLATION: Shelby/Metco Fuel Rails - Shelby Alcoa Forged 20" Dura-Bright Super Snake Style Wheels - Shelby Billet Aluminum Fuel Door - NMB2 2-Stage WOT Box - Granatelli Motors Tire Fryer Line-lock - ZEX N2O kit - Ford Racing Lighted Sill Plates w/Ford Racing logo.

 

Soon to be "For Sale": Eradispeed Rear Brake Rotors & Caliper Relocation Brackets


#89 OFFLINE   Snoopy49

Snoopy49

    Team Shelby Member

  • Members
  • PipPip
  • 1,262 posts
  • Joined 18-May 12
  • Region:Pacific Coast

Posted 15 December 2012 - 11:08 PM

Shelby Alcoa Guide Pages 1 & 2

Attached File  1 sml.jpg   165.77KB   42 downloads

Attached File  2 sml.jpg   193.22KB   104 downloads

Edited by Snoopy49, 16 December 2012 - 11:51 AM.

2013 GT500 Coupe - HPW with Black Stripes - SVT PP - SVT TP - Redline Hood Struts - Yeager Bros Front Gravel Guards - Bob's Oil Separator -AirAid Blue Non-Oiled Air Filter - CarboTech 1521 Ceramic Brake Pads - Resonator Eliminator Kit - WeatherTech Floor Mats
Car Ordered 5-27-2012 - Build Date 1-14-2013 - Delivered 1-26-2013


#90 OFFLINE   Snoopy49

Snoopy49

    Team Shelby Member

  • Members
  • PipPip
  • 1,262 posts
  • Joined 18-May 12
  • Region:Pacific Coast

Posted 15 December 2012 - 11:17 PM

Shelby Alcoa Guide Pages 3 & 4

Attached File  3 sml.jpg   171.18KB   35 downloads

Attached File  4 sml.jpg   248.44KB   31 downloads

Edited by Snoopy49, 16 December 2012 - 11:48 AM.

2013 GT500 Coupe - HPW with Black Stripes - SVT PP - SVT TP - Redline Hood Struts - Yeager Bros Front Gravel Guards - Bob's Oil Separator -AirAid Blue Non-Oiled Air Filter - CarboTech 1521 Ceramic Brake Pads - Resonator Eliminator Kit - WeatherTech Floor Mats
Car Ordered 5-27-2012 - Build Date 1-14-2013 - Delivered 1-26-2013






Also tagged with one or more of these keywords: alcoa, forged, 50th, wheel, super snake

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users