Jump to content





Photo

Brake Reservoir Covers NOW AVAILABLE!


  • Please log in to reply
152 replies to this topic

#1 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 03:47 PM

http://www.shelbysto...ver-p/74222.htm


Jer

Edited by Jer, 15 October 2012 - 03:48 PM.

2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#2 OFFLINE   08KR525

08KR525

    08KR525

  • Great Lakes Region
  • 787 posts
  • Joined 30-October 09
  • Region:Great Lakes
  • Interests:Family, Performance vehicles, antiques.

Posted 15 October 2012 - 04:06 PM

Jer, will a KR version be offered later on for those cars built with the earlier style master cylinder like the SGTs?
" My grandfather once told me that there were two kinds of people; those who do the work and those who take the credit. He told me to try to be in the first group; there was much less competition." - Indira Ghandi.

Silence is golden, but duct tape is silver.

#3 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 05:13 PM

Jer, will a KR version be offered later on for those cars built with the earlier style master cylinder like the SGTs?


I believe so. I hate to leave ANYONE behind... :salute:


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#4 OFFLINE   H0050

H0050

    H0050

  • Pacific Coast Region
  • 4,696 posts
  • Joined 28-September 07
  • Region:Pacific Coast
  • Interests:Cars, wakeboarding, fishing & family
Garage View Garage

Posted 15 October 2012 - 05:26 PM

Looks nice. How about a Shelby GT-H or even just a plain "Shelby" one
Harald #50

CSM 06H0050: Registered as a Shelby GT-H/SC
Black CS 69 w/ 255/45/18 & 285/40/18 BFG G-Force KDW
Lower Billet Grill
Air Bag Signed by Carroll Shelby, Amy Boylan, Gary Davis, Gary Patterson & Cleo Shelby
40th Anniversary Signature Floor Mats w/ Gold Stripes
Shelby GT Plus & Eradispeed 14" brakes & S/S brake lines
Sequential Tail lights
GTH Billet Fluid Caps
SAI installed polished Paxton SC # 0066 w/ GT 500 fuel pump
GT-H/SC side stripes
Shelby gauges & gauge pod
424RWHP 367 Torque
KR rear end expansion tank
2009 Shelby Bash top 20 winner
2011 Bash In & Out cruise recognition plaque
Painted over the top stripes
Terlingua Deep Draw Hood
2014 Vegas Bash Show & Shine Class Winner

The race is run, the flag unfurled, the champion now will rest.
God speed, Carroll Shelby, we will never forget you.
CARROLL H SHELBY

Jan. 11, 1923 May 10, 2012


http://i414.photobuc...8/06h50/030.jpg
http://i414.photobuc...8/06h50/035.jpg
http://i414.photobuc...8/06h50/037.jpg

#5 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 05:32 PM

Looks nice. How about a Shelby GT-H or even just a plain "Shelby" one


There will be a plain "Shelby" one.

Thanks,


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#6 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,410 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 15 October 2012 - 06:14 PM

Sorry for my ignorance....where is located the brake reservoir in the engine bay? :drop:

Any picture? :rockon:

Edited by Amigo GT500, 15 October 2012 - 06:15 PM.

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#7 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 15 October 2012 - 06:37 PM

Sorry for my ignorance....where is located the brake reservoir in the engine bay? :drop:

Any picture? :rockon:


Mounted on the firewall, driver's side. This cover goes over the existing white plastic tank.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#8 OFFLINE   Larry T

Larry T

  • Canada Region
  • 2,952 posts
  • Joined 28-April 06
  • Region:Canada
  • Interests:UFC, Shelby's , SOA

Posted 15 October 2012 - 07:02 PM

There will be a plain "Shelby" one.

Thanks,


Jer



Hello Jer, any particular reason why there will be no GT-H version, with 1000 made they would be an easy sell.
NO MANS LAND (1987)

[The car phone in the Porsche rings]
Benjy Taylor: Hello? No, Rick is not here. Who am I? The guy stealing Rick's car...



2006 SHELBY GT-H CSM06H281

#9 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 15 October 2012 - 07:09 PM

Mounted on the firewall, driver's side. This cover goes over the existing white plastic tank.


Jer

,,Hey bro ,, I got a question , I just looked really hard at my 2007 GT/CS and it was built on June 20th,2007 ,, I don't think that these will work on my car ,,my 07 - has a small plastic line ,that comes out brake tank by the back left corner about 1.5 inches - facing the fender inside by the fire wall,, I don't think the cover will go over it ,, I will try and post a picture soon. ,,just saying ,
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#10 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 15 October 2012 - 07:19 PM

,,Hey bro ,, I got a question , I just looked really hard at my 2007 GT/CS and it was built on June 20th,2007 ,, I don't think that these will work on my car ,,my 07 - has a small plastic line ,that comes out brake tank by the back left corner about 1.5 inches - facing the fender inside by the fire wall,, I don't think the cover will go over it ,, I will try and post a picture soon. ,,just saying ,

,,OK,, here is a old picture but you can see the plastic part that comes off the back corner of my 2007 GT/CS brake tank ,,, I'll still try and take more pictures soon ,, ,,Attached File  000144-R1-17-16A.jpg   887.53KB   66 downloads

Edited by richard m.switzer, 15 October 2012 - 07:46 PM.

000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#11 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 15 October 2012 - 07:26 PM

,,OK,, here is a old picture but you can see the plastic park that comes off the back corner of my 2007 GT/CS brake tank ,,, I'll still try and take more pictures soon ,, ,,Attached File  000144-R1-17-16A.jpg   887.53KB   66 downloads

, I added a painted picture here so you can see what I mean more ,,thanks again for looking , B) ,,,,,,,,,Attached File  painted pic.jpg   823.49KB   45 downloads,,the plastic line only comes out about 1.5 inches thoe ,and its right in the corner part . looks like some kinda plug off . or tank grain hole / line .

Edited by richard m.switzer, 15 October 2012 - 07:29 PM.

000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#12 OFFLINE   Leroy

Leroy

    Team Shelby New Member

  • Pacific Coast Region
  • 159 posts
  • Joined 22-September 07
  • Region:Pacific Coast
  • Interests:Cruising, Cars

Posted 15 October 2012 - 07:27 PM

Just ordered a cover for the SGT. Will be looking out for the early style for the GT-500. These covers look real nice with the Oil fill and Coolant cap sets.
Keep the parts coming Jer!!

Ted
FRPP CAI
KR Exhaust
H-Pipe
FRPP Short throw shifter
FRPP Chrome shifter and white shifter ball
Updated clutch and flywheel 2nd Generation
Webelectric sequentials
Shorty Antenna
Carroll Shelby Signed dash plaque
KR Trunk Hood Liner
3.73 Ford Bullitt / KR OEM Service Gears
FRPP Axle Girdle
KR Axle Reservior
S H E L B Y trunk letters (JLT)
TVS VMP Supercharger 2.5 pulley 91 octane VMP Tune
Redline front hood Struts black
FRPP Lowering Springs
FRPP Front and Rear Sway Bars
KR Struts and Shocks
BMR Adjustable Panhard Bar and Brace
KR Brake Cooling Bezels w/kit and Lower grille
GT-500 Dead pedal
DG Customs Outside Mirror covers

08 Shelby GT Vista Blue Auto
Shorty Antenna
FRPP Blue rocker covers
Redline Hood Struts Black
Shelby GT Dead Pedal
Shelby Store GT 3 piece Floor mat set
Sequential Turn Signals
Carrol Shelby Signed Passenger Visor
Shelby GT Trunk liner
DG Customs Outside Mirror Covers
Shelby Front Brake Duct Bezels and PIAA Fog lights

#13 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 15 October 2012 - 07:37 PM

, I added a painted picture here so you can see what I mean more ,,thanks again for looking , B) ,,,,,,,,,Attached File  painted pic.jpg   823.49KB   45 downloads,,the plastic line only comes out about 1.5 inches thoe ,and its right in the corner part . looks like some kinda plug off . or tank grain hole / line .

,,Ok,, here's alot better picture :camera: ,,Attached File  626333-R1-22-2A.jpg   975.03KB   122 downloads,,, " do you think that will be a issue when installing the brake tank cover ? ,, :camera:
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#14 OFFLINE   Amigo GT500

Amigo GT500

    Team Shelby Member

  • South Atlantic Region
  • 1,410 posts
  • Joined 05-July 11
  • Region:South Atlantic
  • Interests:Harley Davidson Motorcycles

Posted 16 October 2012 - 03:36 AM

Mounted on the firewall, driver's side. This cover goes over the existing white plastic tank.


Jer


Thanks mi amigo Jer.....I will order it :yahoo:

2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels, Wide Body

1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)


2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby

2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes


I'm not going to take this defeatist attitude and listen to all this crap any more from all these people who have nothing except doomsday to predict. Carroll Shelby

#15 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 16 October 2012 - 06:22 AM

,,Ok,, here's alot better picture :camera: ,,Attached File  626333-R1-22-2A.jpg   975.03KB   122 downloads,,, " do you think that will be a issue when installing the brake tank cover ? ,, :camera:


I'll check on my '07 SGT when I get home.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#16 ONLINE   ilmor

ilmor

    ilmor

  • Northeast Region
  • 11,621 posts
  • Joined 04-May 07
  • Region:Northeast
  • Interests:Shelby GT's (what else), Guitar, Camping in my RV, auto racing, autocross, car shows

Posted 16 October 2012 - 08:28 AM

Nice...
2007 Shelby GT CSM# 07SGT1917 - the "Garage Queen"

Performance White, Hurst 5-Speed, Premium Package



Shelby 4.6L Racing Valve Covers ,Shelby Turbo Mufflers, Shelby GT Brake Duct Kit, "S" snake faux gas cap, Carroll Shelby autographed dash, Improved Shelby GT hood scoop replaced by Tasca Mod Shop, Craig's Custom License Plate Bracket, Baer GT Rotors, Hawk HP Plus Pads, Stainless Steel Brake Lines, Hi Temp Brake Fluid, J&M Street/Race Extreme Joint Lower Control Arms, J&M Double Adjustable Panhard Rod (Street/Race) ...



2013 Mustang GT Premium - the "Daily Driver"

Black / Black & Glass Roof, 6-Speed SelectShift, Sync, NAV, Interior Upgrade.....


#17 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 16 October 2012 - 10:39 AM

I'll check on my '07 SGT when I get home.

Jer

,, ok,, thanks Jer ,,,, I wonder if anyone else here has this same brake fuild tank / reservoir as seen in my picture from my car ( 2007 GT/CS ) build on 06-20-2007.
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#18 OFFLINE   Leroy

Leroy

    Team Shelby New Member

  • Pacific Coast Region
  • 159 posts
  • Joined 22-September 07
  • Region:Pacific Coast
  • Interests:Cruising, Cars

Posted 16 October 2012 - 09:10 PM

,,Ok,, here's alot better picture :camera: ,,Attached File  626333-R1-22-2A.jpg   975.03KB   122 downloads,,, " do you think that will be a issue when installing the brake tank cover ? ,, :camera:


I Have an early bulid 08 Shelby GT 11-07-2007 and I have the wider brake reservoir with the same pinched off nipple. Mine is an automatic and this fitting is used for the 5 spd cars to feed the clutch slave cylinder or (CRC) assembly. If you look closely at the picture of the cover on the Shelby website you can see a slot at the back left side allowing for the line to clear. Pretty sure you will be ok. My early bulid GT-500 has the same reservoir but with the hose attached of course for the CRC.
Let us know Jer if I got right.

Thanks
Ted
FRPP CAI
KR Exhaust
H-Pipe
FRPP Short throw shifter
FRPP Chrome shifter and white shifter ball
Updated clutch and flywheel 2nd Generation
Webelectric sequentials
Shorty Antenna
Carroll Shelby Signed dash plaque
KR Trunk Hood Liner
3.73 Ford Bullitt / KR OEM Service Gears
FRPP Axle Girdle
KR Axle Reservior
S H E L B Y trunk letters (JLT)
TVS VMP Supercharger 2.5 pulley 91 octane VMP Tune
Redline front hood Struts black
FRPP Lowering Springs
FRPP Front and Rear Sway Bars
KR Struts and Shocks
BMR Adjustable Panhard Bar and Brace
KR Brake Cooling Bezels w/kit and Lower grille
GT-500 Dead pedal
DG Customs Outside Mirror covers

08 Shelby GT Vista Blue Auto
Shorty Antenna
FRPP Blue rocker covers
Redline Hood Struts Black
Shelby GT Dead Pedal
Shelby Store GT 3 piece Floor mat set
Sequential Turn Signals
Carrol Shelby Signed Passenger Visor
Shelby GT Trunk liner
DG Customs Outside Mirror Covers
Shelby Front Brake Duct Bezels and PIAA Fog lights

#19 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 17 October 2012 - 05:15 AM

I Have an early bulid 08 Shelby GT 11-07-2007 and I have the wider brake reservoir with the same pinched off nipple. Mine is an automatic and this fitting is used for the 5 spd cars to feed the clutch slave cylinder or (CRC) assembly. If you look closely at the picture of the cover on the Shelby website you can see a slot at the back left side allowing for the line to clear. Pretty sure you will be ok. My early bulid GT-500 has the same reservoir but with the hose attached of course for the CRC.
Let us know Jer if I got right.

Thanks
Ted


I'll double check as soon as the sun comes up here... can't see a damn thing yet. LOL


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#20 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 17 October 2012 - 06:11 AM

OK, finally bright enough to see here!

Ted is absolutely correct. There are notches in the cover that fit over the hose lines.
Richard, you are good to go!

Thanks, Ted!



Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#21 OFFLINE   IASHELBYGT

IASHELBYGT

    White Lightning with 66 DNA

  • Northern Plains Region
  • 1,680 posts
  • Joined 29-March 06
  • Region:Northern Plains
  • Interests:Shelby & Ford Vehicles and Iowa Hawkeye sports.

Posted 17 October 2012 - 11:03 AM

Jer,
Will the cover still allow you to use the Shelby billet fluid caps? Also, I'm disappointed no "S" Snake on the Shelby GT cover.
Dave

Edited by IASHELBYGT, 17 October 2012 - 11:05 AM.

IASHELBYGT- IOWA CITY, IOWA - HAWKEYE FAN



2006 Legend Lime GT Automatic w/Camel Leather. Interior upgrade w/satin aluminum panel, active anti-theft and 17" machined aluminum wheels. 1/1,790 produced in Legend Lime.
2007 Performance White 5-speed SGT w/light graphite leather. Interior upgrade w/satin aluminum panel, active anti-theft & wheel locking kit. 1/1,771 white 5-speeds produced, 1/639 with light graphite interior.
2013 Grabber Blue Boss 302 6-Speed w/charcol black cloth bucket. Recaro sport seats/Helical differenial, Boss car cover, boss floor mats. 1/429 produced in grabber blue.

#22 OFFLINE   Lgs ShelbyGT

Lgs ShelbyGT

    Team Shelby New Member

  • Pacific Northwest Region
  • 496 posts
  • Joined 19-September 08
  • Region:Pacific Northwest
  • Interests:cars, street bikes, sand dunes & ATVs, snow skiing & martial arts

Posted 17 October 2012 - 12:39 PM

Jer,
Will the cover still allow you to use the Shelby billet fluid caps? Also, I'm disappointed no "S" Snake on the Shelby GT cover.
Dave


same question & disappointment
Posted ImagePosted Image
2007 Shelby GT Black 07SGT1717
E-force w/FRPP CAI (450 rwhp/443 rwt), McLeod RST, FRPP radiator, Brembos & SS lines, KR r axle reservoir, Steeda LCAs, Roush Off Road axle backs + other stuff
Still setting on the shelf to install: Fays2 Watts Link, FRPP front brake cooling ducts, GT500 splitter, UPR catch can (how to mount it...)
Ancient History:
1965 Mustang - 289 4brl, 4spd, Pony Pack, factory traction bars (1968-1971)
1968 Mustang California Special - 351W 4brl with Shaker hood 426HP
line lock, cool can, Shelby suspension upgrades, etc (1973)

#23 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Mississippi Valley Region
  • 1,902 posts
  • Joined 06-January 08
  • Region:Mississippi Valley

Posted 17 October 2012 - 01:45 PM

OK, finally bright enough to see here!

Ted is absolutely correct. There are notches in the cover that fit over the hose lines.
Richard, you are good to go!

Thanks, Ted!



Jer

,, OK,,, thanks Jer . :yahoo:
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg ,
Picture 011.jpg

41.gif

#24 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 18 October 2012 - 05:55 AM

Jer,
Will the cover still allow you to use the Shelby billet fluid caps? Also, I'm disappointed no "S" Snake on the Shelby GT cover.
Dave


Yes, the billet cap will still fit.
As for the "S-snake", if you really want one under your hood, I'd suggest the matching fusebox cover!
http://www.shelbysto...ver-p/74220.htm


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#25 OFFLINE   IASHELBYGT

IASHELBYGT

    White Lightning with 66 DNA

  • Northern Plains Region
  • 1,680 posts
  • Joined 29-March 06
  • Region:Northern Plains
  • Interests:Shelby & Ford Vehicles and Iowa Hawkeye sports.

Posted 18 October 2012 - 01:09 PM

Yes, the billet cap will still fit.
As for the "S-snake", if you really want one under your hood, I'd suggest the matching fusebox cover!
http://www.shelbysto...ver-p/74220.htm


Jer

I thought I read somewhere these were no longer being made. Obviously I was mistaken. Okay, you run another 15% off sale and I'll get that and a few other parts I've had my eye on.
IASHELBYGT- IOWA CITY, IOWA - HAWKEYE FAN



2006 Legend Lime GT Automatic w/Camel Leather. Interior upgrade w/satin aluminum panel, active anti-theft and 17" machined aluminum wheels. 1/1,790 produced in Legend Lime.
2007 Performance White 5-speed SGT w/light graphite leather. Interior upgrade w/satin aluminum panel, active anti-theft & wheel locking kit. 1/1,771 white 5-speeds produced, 1/639 with light graphite interior.
2013 Grabber Blue Boss 302 6-Speed w/charcol black cloth bucket. Recaro sport seats/Helical differenial, Boss car cover, boss floor mats. 1/429 produced in grabber blue.

#26 OFFLINE   Ford Fest

Ford Fest

    Team Shelby Member

  • Members
  • PipPip
  • 589 posts
  • Joined 08-October 11
  • Region:Northern Plains

Posted 18 October 2012 - 06:50 PM

I believe so. I hate to leave ANYONE behind... :salute:


Jer


Can these be picked up in person or do they have to be shipped?

How many pre-orders would you need to do a set for the 40th owners?

2007 Shelby GT500 40th Anniversary
Built July 2006 - Converted March 2009
FRPP TVS & CAI

Shelby Extreme-Plus Brake System
Short Throw Shifter

Proud member of Team 40th - CSM 07XL0298

th_IMG_5390.jpg


#27 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 18 October 2012 - 07:08 PM

Can these be picked up in person or do they have to be shipped?

How many pre-orders would you need to do a set for the 40th owners?


I'm always willing to accomodate people picking them up in person.
As for the "40th", I'll have to look into it.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#28 OFFLINE   500forme

500forme

    Founding Member of Team Shelby

  • Mountain Region
  • 359 posts
  • Joined 17-January 08
  • Region:Mountain
  • Interests:Water skiing, Boating, Dirt bikes, Desert Racing and Horses.

Posted 19 October 2012 - 10:12 AM

Count me in on one for a 40th Anniversary also.
Proud Member Team 40th CSM#07XL0253
1 of Only 7 Blue Coupes Built with 725HP SS Option

Please visit www.actionrv.com

#29 OFFLINE   Oh8SnakeDriver

Oh8SnakeDriver

    I can't drive 55!!

  • Team Shelby Club Member
  • 562 posts
  • Joined 07-April 06
  • Region:Great Lakes
  • Interests:Shelby's, Mustangs, Motorcycles, R/C Airplanes, HO Scale Trains, Target shooting, Traveling.

Posted 19 October 2012 - 10:54 AM

Jer,
Will they be offering these in the Anodized Black finish? I'd really like to match my Shelby Extreme Duty Coolant Reservoir Tanks.
Posted Image Thanks,

Mike
2008 GT500

Alloy Clear coat Metallic W/Silver Stripes, Charcoal w/Red Interior, HID Headlamps, DVD Nav System, Premium Trim Package, Ambient Lighting, Full Car Cover, #1753 of 6513 coupes and #78 of 314 in Alloy Metallic.

Ordered 7/20/07, Receipt Date: 7/23/2007, DORA 7/23/07, VOC 7/25/07, Serialize Date 8/24/2007, Segment Date 8/24/2007, VIN # Received 8/25/07, Sequence Date: 9/13/2007, Blend Date: 9/14/2007, Produced Date: 9/24/07, Gate Release Date: 9/24/07 Ship Date: 10/19/07 Arrival Date: 10/26/07 Sold Date: 11/03/07

Engine Builders: Laurie Bowen and Mark Schuman

Mod's
Whipple 2.9, 72 Lb injectors, L&M 66mm TB, Tr 6 plugs, JLT CAI, Diablo MAFia, Jon Lund 93 tune. Mcleod RXT Clutch. MGW 6 Speed Short Throw Shifter.
Steeda Hood Lift Kit, MGW Billet Parts including the 6 Speed F@$%*@G Fast Shift Knob! Lethal's LED's, MRT Sequential Turn Signals, CDC Shorty Antenna, CDC Dead Pedal, KR axlebacks, Shelby/C&R Radiator and Heat Exchanger, Reische 170 dgr Thermostat, Shelby/C&R Extreme Duty Coolant Tanks, FR3SVT Handling Pack Suspension, BMR Panhard Bar & Upper Panhard Rod Support. JLT Oil Separators.
Nitto NT05R 315/45/18

Posted ImagePosted ImagePosted Image Posted ImagePosted Image

#30 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,209 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 19 October 2012 - 11:47 AM

Jer,
Will they be offering these in the Anodized Black finish? I'd really like to match my Shelby Extreme Duty Coolant Reservoir Tanks.
Posted Image Thanks,

Mike


No plans for that currently. It may be something we consider in the future, however.

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users