Jump to content





Photo

New carbon fiber pieces


  • Please log in to reply
61 replies to this topic

#31 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 04 December 2012 - 07:50 AM

Jer has any progress been made on the carbon fiber pieces? Really really interested in these.


A few new items will be out in December, but the majority will hit in Jan or Feb. Details ASAP...

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#32 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 04 December 2012 - 08:58 AM

A few new items will be out in December, but the majority will hit in Jan or Feb. Details ASAP...

Jer


ooooooo I'm excited for this then.....details now???

how about now?


maybe now?
























now?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#33 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 04 December 2012 - 08:59 AM

By the way Jer for the SS carbon fiber splitter if you guys are going to stop production on that again are you going to warn us before hand?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#34 OFFLINE   trevor08gt

trevor08gt

    Team Shelby New Member

  • Members
  • Pip
  • 71 posts
  • Joined 29-September 12
  • Region:Other
  • Interests:Mustangs!

Posted 04 December 2012 - 10:33 AM

A few new items will be out in December, but the majority will hit in Jan or Feb. Details ASAP...

Jer


That is awesome I can't wait! Very excited! Is there a link to the SS splitter I can't seem to find it in the store?

2011 GT/CS

GT/CS

 


#35 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 04 December 2012 - 10:51 AM

http://www.shelbysto...m-16601-css.htm
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#36 OFFLINE   HiPerGT500

HiPerGT500

    Bill

  • Great Lakes Region
  • 103 posts
  • Joined 09-June 10
  • Region:Great Lakes

Posted 04 December 2012 - 01:57 PM

It's out of stock ...I just checked.

#37 OFFLINE   MJN

MJN

    Team Shelby Member

  • Great Lakes Region
  • 686 posts
  • Joined 12-May 12
  • Region:Great Lakes
Garage View Garage

Posted 04 December 2012 - 04:54 PM

Back in stock just looked lol, but true. I really want to have that splitter but just can not do now, sure hope they don't go down the road with this one.

12 GT500 Blk Stripe DeleteBorla Cat back, JLT carbon fiber intake and splash guards, 3M Clear Bra, Kenny Brown Matrix Brace, KB custom coil overs and rear suspension set up, AFCO Pro H/E, MGW Shifter, Shelby Oil Separator

AMSOIL Dealer


#38 OFFLINE   butch12573

butch12573

    Team Shelby New Member

  • Members
  • Pip
  • 115 posts
  • Joined 07-June 07

Posted 04 December 2012 - 05:57 PM

Jer,

Will you guys be making the 2007-2009 Super Snake front chin splitters again. I damaged mine yesterday and contacted Wendy and was told there no longer available but possible in the future

#39 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 04 December 2012 - 09:05 PM

We will make all these parts of EVERY year Shelby, but I have no ETA sometimes, since I'm getting a flood of requests for so many parts. Stay tuned.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#40 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 04 December 2012 - 09:21 PM

We will make all these parts of EVERY year Shelby, but I have no ETA sometimes, since I'm getting a flood of requests for so many parts. Stay tuned.


Jer


I am confused by this? You just said you will have more details very soon but now no ETA?
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#41 OFFLINE   trevor08gt

trevor08gt

    Team Shelby New Member

  • Members
  • Pip
  • 71 posts
  • Joined 29-September 12
  • Region:Other
  • Interests:Mustangs!

Posted 05 December 2012 - 12:27 AM

Jer,

Will you guys be making the 2007-2009 Super Snake front chin splitters again. I damaged mine yesterday and contacted Wendy and was told there no longer available but possible in the future


I need the 07-09 too. Hope it's available soon!

2011 GT/CS

GT/CS

 


#42 OFFLINE   05mustangman

05mustangman

    "The Evilsnake"

  • Mountain Region
  • 1,013 posts
  • Joined 17-September 09
  • Region:Mountain
  • Interests:Mustangs and going fast
Garage View Garage

Posted 05 December 2012 - 03:15 AM

We will make all these parts of EVERY year Shelby, but I have no ETA sometimes, since I'm getting a flood of requests for so many parts. Stay tuned.


Jer


Jer even though I don't need many parts right now, You are the man! Seeing everything you are doing for ALL Team Shelby members is just above and beyond anything else I have seen come from Shelby. I love that you are trying to get all years involved with parts not just specific years. Again, much props to you Jer! Keep up the fantastic work!
Posted Image
2010 GT500 Kona Blue - Mods include: Comp Shelby 1000 Grind Cams, Kooks headers, pulleys, suspension system, Baer/Shelby Extreme brakes, basically modded out the wazoo by Shelby American.
Shelby 50th Bash Car Show Class Award Winner

2003 Ford Lightning Black - Mods include: Bassani exhaust, Airaid intake, Hankook Ventus ST tires.

The Man, The Legend
Posted Image

#43 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 05 December 2012 - 07:17 AM

Jer even though I don't need many parts right now, You are the man! Seeing everything you are doing for ALL Team Shelby members is just above and beyond anything else I have seen come from Shelby. I love that you are trying to get all years involved with parts not just specific years. Again, much props to you Jer! Keep up the fantastic work!


Wow, I really appreciate the note. Thank YOU for your support!

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#44 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 05 December 2012 - 10:43 AM

2010+ Carbon Fiber Front Splitters:
http://www.shelbysto...m-16601-css.htm



Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#45 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 23 January 2013 - 09:42 AM

Hey Jer,

Any update on this now that the wheel order is done?

thanks
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#46 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 23 January 2013 - 11:16 AM

Hey Jer,

Any update on this now that the wheel order is done?

thanks


Front splitters have been arriving and leaving the past 30 days or so.
Other stuff is still being researched. No ETA. What item specifically do you need?

Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#47 OFFLINE   Nitro

Nitro

    Team Shelby Member

  • Members
  • PipPip
  • 515 posts
  • Joined 30-December 08
  • Region:Pacific Coast

Posted 23 January 2013 - 12:01 PM

Hi Jer,
I just wanted to say I totally agree with the sentiments expressed here by 05mustangman. you are doing a fantastic job there at Shelby. The improvements are outstanding.
Thank you.
He who hoots with the Owl in the evening, cannot soar with the Eagle in the morning!
"The Engines Horsepower Should Never Exceed The Drivers IQ"

2007 GT500 Performance White/Vista Blue Stripes

#48 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 23 January 2013 - 12:29 PM

Hi Jer,
I just wanted to say I totally agree with the sentiments expressed here by 05mustangman. you are doing a fantastic job there at Shelby. The improvements are outstanding.
Thank you.


I REALLY appreciate everyone's kind words and support. Thank you!


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#49 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 23 January 2013 - 01:50 PM

Front splitters have been arriving and leaving the past 30 days or so.
Other stuff is still being researched. No ETA. What item specifically do you need?

Jer


Rocker panels, side splitters, rear valance and spoiler if it ever gets made. I could settle on just side splitters and rear valance though. Would say mirrors but APR already makes a very good product in that department.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#50 OFFLINE   frank bullitt

frank bullitt

    Team Shelby New Member

  • Members
  • Pip
  • 297 posts
  • Joined 28-February 09
  • Region:Canada
  • Interests:Hockey, Health, Mustangs

Posted 23 January 2013 - 02:12 PM

Front splitters have been arriving and leaving the past 30 days or so.
Other stuff is still being researched. No ETA. What item specifically do you need?

Jer


Any word on 07-09 SS splitters Jer?

Frank Bullitt

 

 

 

 

 

 


#51 OFFLINE   butch12573

butch12573

    Team Shelby New Member

  • Members
  • Pip
  • 115 posts
  • Joined 07-June 07

Posted 23 January 2013 - 02:45 PM

Any word on 07-09 SS splitters Jer?


+1 I'm really in need of one since I had a brain fart and busted mine up

#52 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 23 January 2013 - 03:19 PM

Still untangling THAT ball of yarn, we will have them again, just can't predict ETA.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#53 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 23 January 2013 - 03:39 PM

If it helps Jer perhaps maybe discussing with APR because I know they are doing some molds for other parts. Also autosport dynamics would be the best one as far as quality in my opinion. There was another company that I think it was Phill directed me to for carbon fiber and I don't remember the name but they didn't charge much for molds and such but again if I were to do them I would have just gotten something simple like a decklid because the mold charge for that was only 300.

Also I know katech would be open to this as well since I have already talked with them but I don't really feel like paying 5k just for a rocker panel mold. The best part is for all of these ones I listed is they all use 100% prepreg carbon fiber and they have exceptionally high quality clear coats.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#54 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 23 January 2013 - 06:23 PM

If it helps Jer perhaps maybe discussing with APR because I know they are doing some molds for other parts. Also autosport dynamics would be the best one as far as quality in my opinion. There was another company that I think it was Phill directed me to for carbon fiber and I don't remember the name but they didn't charge much for molds and such but again if I were to do them I would have just gotten something simple like a decklid because the mold charge for that was only 300.

Also I know katech would be open to this as well since I have already talked with them but I don't really feel like paying 5k just for a rocker panel mold. The best part is for all of these ones I listed is they all use 100% prepreg carbon fiber and they have exceptionally high quality clear coats.


APR make wonderful products, and they are the ones doing the 2010-2013 splitters for me now.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#55 OFFLINE   svt13

svt13

    Team Shelby Member

  • Banned
  • PipPip
  • 2,687 posts
  • Joined 24-April 12
  • Region:Northeast

Posted 23 January 2013 - 06:52 PM

APR make wonderful products, and they are the ones doing the 2010-2013 splitters for me now.


Jer


Well then that is perfect actually if you already have a relationship with them. I would reach out to them and have them make molds and such for all the parts you want since I know they were interested in doing those anyway for themselves and selling them.
2013 shelby gt500 black w/black stripe SVTPP,Recaros,Electronics Package,Glass roof,car cover.

Mods:
35% window tint

nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires


Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob


Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery

#56 OFFLINE   Jer

Jer

    Jer

  • Members
  • PipPipPip
  • 5,212 posts
  • Joined 22-December 07
  • Region:Mountain
  • Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.

Posted 23 January 2013 - 07:02 PM

Well then that is perfect actually if you already have a relationship with them. I would reach out to them and have them make molds and such for all the parts you want since I know they were interested in doing those anyway for themselves and selling them.


It's a massive undertaking, hence the untangling of yarn. We shall see.


Jer
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), painted lower fascia (a tribute to Whitey), Shelby Deep Draw (2 3/8") Hood with custom GT350 mesh inserts, Shelby brake duct/driving light bezels with PIAA 510XT lights, Shelby custom underbody front brake duct inlets and fabricated brake cooling plates, Terlingua billet hood pin plates, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso and Shelby tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
UPDATE: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012-May 2014

#57 OFFLINE   REDTAIL

REDTAIL

    Team Shelby Member

  • Pacific Coast Region
  • 509 posts
  • Joined 04-May 08
  • Region:Decline
  • Interests:Custom paint Hydro Carbon AirBrushing

Posted 23 January 2013 - 07:27 PM

when i got some CF parts from JLT thet were not clearcoated with any type of automotive clear coat the Part from APR were not cleared either a far a know TF doesnt clear there part .

that was a few years ago as far as far as i know not many CF Supplier clear coat there parts ? maybe Jer can clear this up


JIM

#58 OFFLINE   shelbyflf

shelbyflf

    shelbyflf

  • Members
  • Pip
  • 9 posts
  • Joined 22-August 13
  • Region:Pacific Coast
  • Interests:Sports,antiques,american art pottery,gardening,furniture refinishing.
Garage View Garage

Posted 07 November 2013 - 02:29 PM

Coming up fast is 2014!Anyone have any idea about getting 2007-2009/10 frt CF chin splitters?Plse,thx



#59 OFFLINE   shelbyflf

shelbyflf

    shelbyflf

  • Members
  • Pip
  • 9 posts
  • Joined 22-August 13
  • Region:Pacific Coast
  • Interests:Sports,antiques,american art pottery,gardening,furniture refinishing.
Garage View Garage

Posted 14 November 2013 - 12:50 PM

 Since their are no CF SS splitters from Shelby,anyone out their use TRUFIBERS's TC10024-LG104KR,i would consider one of these if the quality is good.Maybe using this and getting a mold made from it??From wounded CF splitter.



#60 OFFLINE   ViperNC

ViperNC

    Some say he roams around the woods at night foraging for wolves

  • Members
  • PipPip
  • 1,350 posts
  • Joined 23-December 11
  • Region:South Atlantic
  • Interests:Track days, Mountain bike riding/racing, motorcycle riding, cars, warbirds & chasing my kids, road course racing
Garage View Garage

Posted 14 November 2013 - 05:19 PM

http://www.trucarbon...egory_s/149.htm

 

I'm assuming you mean TRUCARBON which is their carbon fiber retail platform.  Every bit of carbon on my car came from them.  Good quality, fit and finish.


 

 

1c%20(Large).jpg 

2009 Shelby GT500 - Notable Upgrades:

  • True Forged Chicane Wheels w/ Michelin Pilot Super Sport Tires: 275/30/20 Front and 285/30/20 Rear
  • Shelby/Wilwood Front and Rear Racing Brakes
  • Shelby GT500 Brake Duct Bezels/Front Brake Duct Kit
  • Ford Racing Ceramic Coated Shorty Headers
  • Shelby Oil Separator
  • Shelby GT500 Engine Coil Covers
  • Metco 2.6 pulley/idler w/JLT Cold Air Kit and SCT Tune
  • Shelby Billet Aluminum Racing Oil Pan
  • Shelby Extreme Duty Heat Exchanger
  • PST Carbon Fiber Drive Shaft
  • Ford Racing Low Profile Differential Cover w/ over flow tank
  • Flowmaster Exhaust
  • Shelby Racing Front and Rear Sway Bars
  • Shelby Bumpsteer Tie Rod Adjuster
  • Shelby Sway Bar End Links
  • Shelby A Arms
  • Shelby K-Member, Radiator Support, Chassis Support, A Arm Support Brace 
  • Shelby Billet Aluminum Watts Link
  • Metco Billet Aluminum Rear Lower Control Arms
  • Ford Racing Springs
  • Shelby Six Speed Shifter Lever w/ Shelby GT500 Shift Knob
  • Shelby GT500 Engine Billet Aluminum Cap Set
  • Shelby Billet Aluminum Racing Pedal and Dead Pedal Covers
  • Carbon fiber upgrades: Front Splitter, Rocker Panels, Rear Mud Guards, Rear Diffuser, Side View Mirror Inserts, Hood Vents, Door Sills, Speaker Rings, Center Console, Mirror Switch Covers, Door Lock Bezels 

 

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users