Still working on this program, folks... didn't want you to think I've forgotten...
Jer
8
Want a Special Shifter Ball?
Started by
Jer
, Nov 06 2012 06:14 AM
111 replies to this topic
#61 OFFLINE
Jer
-
- Shelby Staff
-
- 3,907 posts
- Joined 22-December 07
Jer
- Gender:Male
- Region:Mountain
- Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.
- Vehicle:Shelby GT
Posted 05 December 2012 - 06:26 PM
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
#62 OFFLINE
2010KonaBlueGT
-
- Members
-
- 6,096 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 06 December 2012 - 11:14 AM
Ford Fest, on 05 December 2012 - 06:20 PM, said:
Anyone know what is required?
Your sig says you have a 40th so it should be the 12mm x 1.25 TP.
'07-'09: 12mm x 1.25
'10-'13: 10mm x 1.25
Aftermarket: 12mm x 1.75
(at least for GT500's)
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#63 OFFLINE
SSSNAKE
-
- Team Shelby Club Member
-
- 1,267 posts
- Joined 03-July 07
Team Shelby Member
- Gender:Male
Posted 06 December 2012 - 02:03 PM
2010KonaBlueGT, on 06 December 2012 - 11:14 AM, said:
Your sig says you have a 40th so it should be the 12mm x 1.25 TP.
'07-'09: 12mm x 1.25
'10-'13: 10mm x 1.25
Aftermarket: 12mm x 1.75
(at least for GT500's)
Phill
'07-'09: 12mm x 1.25
'10-'13: 10mm x 1.25
Aftermarket: 12mm x 1.75
(at least for GT500's)
Phill
If you have a 40th, it may depend on whether or not you have a stock or upgraded (SPP) shifter 'cause I believe they're different.
But of course it probably won't matter since the proposed balls will come with a few adapters.
Any snow yet Phill?
I guess winter will be a little more bearable after the elections, eh?
'Course being from Md, I can now marry my toy poodle, lol.
#64 OFFLINE
2010KonaBlueGT
-
- Members
-
- 6,096 posts
- Joined 31-October 09
There's room at the top. Space is limited...RSVP!
- Gender:Male
- Region:Mountain
- Interests:Anything Fast - Cars, Motorcycles, Boats, Planes, Women, etc. Building Hi-Po engines. Sailing, Riding Motorcycles (dirt & street), Racing - Motorcycles & Cars, Bowling & Drinking Beer!
- Vehicle:GT500
Posted 06 December 2012 - 02:18 PM
SSSNAKE, on 06 December 2012 - 02:03 PM, said:
If you have a 40th, it may depend on whether or not you have a stock or upgraded (SPP) shifter 'cause I believe they're different.
But of course it probably won't matter since the proposed balls will come with a few adapters.
Any snow yet Phill?
I guess winter will be a little more bearable after the elections, eh?
'Course being from Md, I can now marry my toy poodle, lol.
But of course it probably won't matter since the proposed balls will come with a few adapters.
Any snow yet Phill?
I guess winter will be a little more bearable after the elections, eh?
'Course being from Md, I can now marry my toy poodle, lol.
I thought the post he was replying to said he had a stock shifter/handle in his car. Mebbe not. I tried to look back and couldn't find the first one.
NO snow here yet but it got cold today (was 68 yesterday) and snow is expected this weekend. We need it BADLY. We'll be on water rationing soon. Good thing it's winter and I don't have to water my lawn but once a month.
I thought things would settle down here after the elections too. I'm registered Republican, the wife is registered Democrat and we live in a swing state so we were getting HAMMERED with robo-calls from all sides and above. TV too. I flat out stopped answering my phone, turned the ringer off and figured if a friend wanted me, they knew my cell number.
And now we're getting calls from different 'groups' that are trying to get the Affordable Medical Act (aka "Obama-care") overturned (Mike Huckabee), another telling us Obama isn't his real name and "we have a traitor in the Whitehouse, please send money", etc. etc. etc.
I can buy just about any gun I desire (and I have!) but I still can't marry my toy poodle! <LOL>
Man, and I thought Calif. was bad. We get door-to-door solicitors constantly here and phone calls on top of that. It's crazy.
Phill
2010 GT500 Coupe
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler Cap Covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW: Short Throw Shifter - White w/Blue Stripes Shifter Knob - Radiator and Intercooler Degas Bottle Caps - Seat Recliner Lever Covers - Parking Brake Handle Cover - Coat Hanger Hooks~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler Degas Bottle - Side Splitters - Extreme Off-road Exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler Pulley - Oil Dipstick Handle, MC, PS & WS Washer Reservoir Caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti Bump-stear Tie-rod Ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - Shelby/BMR Lower Control Arm Relocation Brackets -18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#65 OFFLINE
Ford Fest
-
- Members
-
- 328 posts
- Joined 08-October 11
Team Shelby New Member
- Gender:Male
- Region:Northern Plains
- Vehicle:GT500 40th
Posted 06 December 2012 - 06:21 PM
Is this the stock shifer handle?
Not sure if it matters, but SAI installed the short throw shifter. I would like to replace the handle with a shifter ball if it isn't too much of a pain.
Not sure if it matters, but SAI installed the short throw shifter. I would like to replace the handle with a shifter ball if it isn't too much of a pain.
2007 Shelby GT500 40th Anniversary
Built June 2006 - Converted March 2009
FRPP TVS & CAI
Shelby Extreme-Plus Brake System
Short Throw Shifter
FRPP 08' Damper
Proud member of Team 40th - CSM 07XL0298
Built June 2006 - Converted March 2009
FRPP TVS & CAI
Shelby Extreme-Plus Brake System
Short Throw Shifter
FRPP 08' Damper
Proud member of Team 40th - CSM 07XL0298
#66 OFFLINE
Nikko747
-
- Members
-
- 25 posts
- Joined 06-July 12
Team Shelby New Member
- Gender:Male
- Region:Pacific Coast
- Interests:Mustangs, triathlons.
- Vehicle:GT500
Posted 09 December 2012 - 07:55 PM
I would Love an alloy grey knob with satin silver Cobra snake, gear numbers and rally stripes to match my car. I just ordered the grey ball with black writing and installed it on my new MGW short throw but am not completely satisfied with it. It seemed like the best option for my car though. Thank you.
#67 OFFLINE
Jer
-
- Shelby Staff
-
- 3,907 posts
- Joined 22-December 07
Jer
- Gender:Male
- Region:Mountain
- Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.
- Vehicle:Shelby GT
Posted 13 December 2012 - 12:22 AM
I'm starting to feel a little goofy for having the stock SGT shifter ball on MY car... LOL....
Jer
Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
#68 OFFLINE
1sgt
-
- Team Shelby Club Member
-
- 419 posts
- Joined 14-December 10
1sgt
- Gender:Male
- Region:Northeast
- Interests:HOT CARS & HOT BOATS
- Vehicle:GT500 SuperSnake
Posted 25 December 2012 - 03:44 PM
How about a Ruby Red and WHITE 2014
#69 OFFLINE
tbarb169
-
- Members
-
- 27 posts
- Joined 01-July 12
Team Shelby New Member
- Gender:Male
- Region:Northern Plains
- Interests:Golfing and my 2007 SGT!
- Vehicle:Shelby GT
Posted 26 December 2012 - 10:43 AM
07SGT3946
Chrome shorty antenna, Billet lower grill, Craig's custom license plate bracket, Shelby billet engine cap set, Brushed aluminum Shelby fuel door, Sequential tail lights, Steeda intake elbow, MMD chrome hood struts, Steeda billet oil separator, Steeda underdrive pulleys, SCT - Bama tunes, Baer Decelarotors w/Hawk HPS pads, Shelby GT aluminum brake reservoir cover, Shelby GT aluminum fuse box cover, Shelby billet washer nozzel covers, Shelby brake duct bezels and driving lights...
Steeda panhard bar *
Stainless Steel Brake Lines*
* - purchased waiting to be installed!
Chrome shorty antenna, Billet lower grill, Craig's custom license plate bracket, Shelby billet engine cap set, Brushed aluminum Shelby fuel door, Sequential tail lights, Steeda intake elbow, MMD chrome hood struts, Steeda billet oil separator, Steeda underdrive pulleys, SCT - Bama tunes, Baer Decelarotors w/Hawk HPS pads, Shelby GT aluminum brake reservoir cover, Shelby GT aluminum fuse box cover, Shelby billet washer nozzel covers, Shelby brake duct bezels and driving lights...
Steeda panhard bar *
Stainless Steel Brake Lines*
* - purchased waiting to be installed!
#70 OFFLINE
Venomus08
-
- Team Shelby Club Member
-
- 6 posts
- Joined 24-July 12
Team Shelby New Member
- Gender:Male
- Region:Great Lakes
- Vehicle:GT500
Posted 28 December 2012 - 06:43 AM
Viper (Silver) with black stripes, 6sp pattern, 2008 Shelby GT500, Supersnake logo
#71 OFFLINE
SGT3477
-
- Team Shelby Club Member
-
- 210 posts
- Joined 17-August 10
Team Shelby New Member
- Gender:Male
Posted 01 January 2013 - 02:19 PM
this is similar to what i am using. i would like something very similar with the SGT logo on it. Thank you! 
ok editing cause i took a few actual pics of the one i have. the finish is awesome... any chance of a finish like this? with the SGT logo.
If I sent you this one...would you etch it and "Authorize" it
Edited by SGT3477, 02 January 2013 - 06:32 PM.
#72 OFFLINE
ati
-
- Members
-
- 1,581 posts
- Joined 20-September 06
Drive It Like You Stole It!!!!
- Gender:Male
- Region:Great Lakes
- Vehicle:Decline, Dodge
Posted 02 January 2013 - 07:22 AM
White Ball / Red Stripes, Snake, "Shelby GT500"
Alan
#73 OFFLINE
MyStang2010GB
View Garage
-
- Members
-
- 14 posts
- Joined 09-March 10
Team Shelby New Member
- Gender:Male
- Region:South Atlantic
- Vehicle:GT500
View Garage
Posted 29 January 2013 - 02:41 PM
2011 ingot silver red stripe ,red cobra on sides
USAF (Retired) / Gas Turbine Controls Engineer (Current)
__________________
__________________
- 2011 Shelby GT500 in Ingot Silver Metallic - Stripe Delete
- SVTPP Pkg
- Electronics (Nav) Pkg.
#74 OFFLINE
yoggiebhr
-
- Members
-
- 189 posts
- Joined 18-March 11
Team Shelby New Member
- Gender:Male
- Interests:MUSTANGS!!!
Posted 06 February 2013 - 09:12 PM
Vista blue ball, silver stripes, Shelby GT engraved on each side, no snake, hurst threads and keep the shift pattern on the top. If "Shelby GT" won't fit on each side, then do the same "CS" logo on each side thats on our dash plaques.
08SGT1097 arrived at SAI on 11/26/2007 and left on 01/17/2008 - in between magic happened.
#75 OFFLINE
jskup1
-
- Members
-
- 118 posts
- Joined 04-February 12
Team Shelby New Member
- Gender:Male
- Region:Northeast
- Vehicle:GT500
Posted 11 February 2013 - 07:07 PM
Silver ball, blue stripes, black cobra and GT500 on each side.
#76 OFFLINE
Jer
-
- Shelby Staff
-
- 3,907 posts
- Joined 22-December 07
Jer
- Gender:Male
- Region:Mountain
- Interests:My wife, my dogs, my cat, cars, and music. NHRA addict.
- Vehicle:Shelby GT
Posted 12 February 2013 - 10:04 PM
This program will be available VERY SOON. Can't wait to be able to offer everyone the shifter ball setup they want.
Jer
Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com
2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/C&R radiator and heat exchanger upgrade, Painted stripes (rockers and Le Mans), Shelby Deep Draw (2 3/8") Hood with custom mesh inserts, Shelby tensioner support brace, Shelby race-fabricated valve covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, Shelby floormats and trunk mat, Shelby Harness Bar, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watts link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, Shelby GT500KR Axle Reservoir, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting, Shelby Helmet and Driving Jacket. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.
Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.
Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides
That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.
UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.
#77 OFFLINE
JT93
-
- Team Shelby Club Member
-
- 477 posts
- Joined 26-January 10
07SGT5059
- Gender:Male
- Region:Great Lakes
- Vehicle:Shelby GT
Posted 14 February 2013 - 06:36 PM
It appears to be another great program/product brought to us by Jer. 
Whatever the competition comes out with, we'll kick the hell out of 'em. - Carroll Shelby
Carroll Shelby Signed Airbag Cover
Great Lakes Region Windshield Banner
Sequential Tail Lights
Boss 302 Rear Seat Delete
Corbeau TRS Seats
SVT Rims for the track
Boss 302 Rims for the street
FRPP Hot Rod Cams
FRPP 62mm Throttle Body
FRPP Intake Manifold
FRPP Black Cam Covers
Brembo Brake Upgrade
FRPP Brake Cooling Kit
Dynatech Long Tubes w/ High Flow Cats
MRT Muffler Delete
Tow Hook with Custom Bracket
Tuned by Paul's High Performance
#78 OFFLINE
DrKSGT
-
- Team Shelby Club Member
-
- 446 posts
- Joined 17-August 07
Area Director - Southeast Michigan
- Gender:Male
- Region:Great Lakes
- Vehicle:Shelby GT
Posted 17 February 2013 - 06:45 PM
Like any version of White with Satin Sliver Stripes mentioned by a number of the SGT fans. Prefer Berg Snake but would take Shebly GT or CS logo sides. Needs to fit Hurst and would keep the the H as well.
Like that we might be able to custom order.
Like that we might be able to custom order.
White SGT 4454, Manual, IUP, Dark Charcol Interior Born Flatrock 4/19/07 Test Drive 8/13/07 Romeo Ford Mine 8/16/07,Dyno 12MY12 270 hp / 287 ft-lbs
Completed Mods: Auto Dimming Rear View Mirror w/ Compass, SPP Berg Faux Gas Cap, Shelby Billet Aluminum Rear Lower Control Arms, MRT Sequential Tail Lights, Chrome Lower Grill, Final Hood Fix, SPP PIA Lower Driving Lights w/ Bezel kit, Shelby Billet Hood Pins, SPP Store Interior Upgrade Black with Silverleaf inserts, KR Trunk Liner, Silverhorse Louvered Side Windows and trunk release, FR500 Chrome Wheels (18x9 F,18x10 R) w/ SPP KR Tires, J&M SS Brake Hoses, GT500 Rotors & Brembo Calipers, SPP Shelby GT Engine Caps, SPP Elite Trunk Lift kit, SPP Shelby GT Dead Pedal, SPP Brake Reservoir Cover, SPP Fuse Box Cover, SPP Adjustable Upper Control Arm, SPP Relocation Brackets
Mods to Come: SPP Billet Watts Link, Whipple 550 S/C, Clutch for the extra horsepower, TBD Jer induced SPP Sale items,
Completed Mods: Auto Dimming Rear View Mirror w/ Compass, SPP Berg Faux Gas Cap, Shelby Billet Aluminum Rear Lower Control Arms, MRT Sequential Tail Lights, Chrome Lower Grill, Final Hood Fix, SPP PIA Lower Driving Lights w/ Bezel kit, Shelby Billet Hood Pins, SPP Store Interior Upgrade Black with Silverleaf inserts, KR Trunk Liner, Silverhorse Louvered Side Windows and trunk release, FR500 Chrome Wheels (18x9 F,18x10 R) w/ SPP KR Tires, J&M SS Brake Hoses, GT500 Rotors & Brembo Calipers, SPP Shelby GT Engine Caps, SPP Elite Trunk Lift kit, SPP Shelby GT Dead Pedal, SPP Brake Reservoir Cover, SPP Fuse Box Cover, SPP Adjustable Upper Control Arm, SPP Relocation Brackets
Mods to Come: SPP Billet Watts Link, Whipple 550 S/C, Clutch for the extra horsepower, TBD Jer induced SPP Sale items,
#79 OFFLINE
WJinLV
View Garage
-
- Team Shelby Club Member
-
- 785 posts
- Joined 15-June 12
WJ in Vegas
- Gender:Male
- Region:Mountain
- Vehicle:GT500
View Garage
Posted 23 February 2013 - 11:19 AM
Love my balls, got one in white and one in black
Attached Files
-
IMG_4032.JPG 75.17K
15 downloads
Edited by WJinLV, 23 February 2013 - 11:20 AM.
2013 Shelby GT500. Performance White Sonic Blue Stripes. Airaid SynthaMax filter. JLT dual oil separators. FRPP resonator delete. Redline hood struts. Michelin PSS, 275/40/19, 285/35/20. Smoked markers. Shelby shifter. Jaeger brothers stone guards. GT350 style rear window covers. Lloyd's mats.
#80 OFFLINE
JT93
-
- Team Shelby Club Member
-
- 477 posts
- Joined 26-January 10
07SGT5059
- Gender:Male
- Region:Great Lakes
- Vehicle:Shelby GT
Posted 04 March 2013 - 03:44 PM
Any update, Jer? I'm looking forward to getting the stock ball out.
Whatever the competition comes out with, we'll kick the hell out of 'em. - Carroll Shelby
Carroll Shelby Signed Airbag Cover
Great Lakes Region Windshield Banner
Sequential Tail Lights
Boss 302 Rear Seat Delete
Corbeau TRS Seats
SVT Rims for the track
Boss 302 Rims for the street
FRPP Hot Rod Cams
FRPP 62mm Throttle Body
FRPP Intake Manifold
FRPP Black Cam Covers
Brembo Brake Upgrade
FRPP Brake Cooling Kit
Dynatech Long Tubes w/ High Flow Cats
MRT Muffler Delete
Tow Hook with Custom Bracket
Tuned by Paul's High Performance
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
