Jump to content





4257 gets a new hood

and painted stripes too!

  • Please log in to reply
59 replies to this topic

#1 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 17 November 2012 - 07:30 PM

Like Harald (H0050) and a few others, we're putting on the Deep Draw to replace the CS6/GT-H hood.  The car is in the shop now getting the work done.  A lot of discussion has occured on how to finish the underside and I think we finally came to a conclusion yesterday...lol

Initially we were going to have the entire underside white with stripes mirroring the topside.  After looking at pics of other deep draw hoods, we came to the final decision of white with stripes but the middle section will be flat textured black, mimicking the pics posted by DH777 in another post.

Unpacking the hood
Posted Image

Posted Image

Posted Image

dry fitting the hood
Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

yesterday day at the paint shop, a little progress.  The paint guy said next week old stripes will be off and taped up for new stripes to be applied.
Posted Image

Posted Image
The front bumper is going to be repainted due to several rock chips and a clear bra will be applied after curing!

Dan
2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#2 OFFLINE   FordRocks1

FordRocks1

    CSM#0405

  • Members
  • PipPip
  • 3,005 posts
  • Joined 02-April 08
  • Gender:Male
  • Vehicle:Other

Posted 17 November 2012 - 08:21 PM

Awesome!!! Keep us posted on the progress...

Our attitude toward life determines life's attitude towards us-Earl Nightingale


#3 OFFLINE   NordicShelby

NordicShelby

    Team Shelby Member

  • Team Shelby Club Member
  • 3,788 posts
  • Joined 24-June 08
  • Gender:Male
  • Region:Northern Plains
  • Vehicle:Shelby GT

Posted 18 November 2012 - 07:32 AM

Does the hood line up evenly with the front edge of the fenders?
2008 SGT Vert #1487 with a Whipple 550 with a little of this and a little of that
2013 Boss 302 #74 Grabber Blue
1971 Olds Cutlass Vert with a 455
2012 Ski-doo XRS 800 eTec
1995 Honda CR250 (retired race bike)
2002 Thunder Mountain Gunnison Motorcycle
1966 Cherokee Piper 180

#4 OFFLINE   REDTAIL

REDTAIL

    Team Shelby New Member

  • Members
  • Pip
  • 365 posts
  • Joined 04-May 08
  • Gender:Male
  • Interests:building one of a kind giant scale RC airplanes furniture and now nothing but cars

Posted 18 November 2012 - 10:24 AM

looks good dan cant wate to see it in person


JIM

#5 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 18 November 2012 - 04:52 PM

View PostNordicShelby, on 18 November 2012 - 07:32 AM, said:

Does the hood line up evenly with the front edge of the fenders?

It will when done.  The one pic with the new hood on is not totally aligned, just set in place to see how it fits.  Because I had to modify my intercooler reservoir tank a little, the hood needs to be recessed slightly in one spot for it to clear it.  The body guy says it will be no problem and when done, you won't even know that it had to be changed.

View PostREDTAIL, on 18 November 2012 - 10:24 AM, said:

looks good dan cant wate to see it in person


JIM

Neither can we Jim...lol


Dan
2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#6 OFFLINE   H0050

H0050

    H0050

  • Team Shelby Club Member
  • 3,400 posts
  • Joined 28-September 07
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT-H
Garage View Garage

Posted 18 November 2012 - 05:20 PM

Dan, looks good.  We are at about the same progresst my front and rear bumpers are off.  I am also painting with the textured black in the center as those shared on the Terlingua site.  Did you notice how much lighter the hood is compared to the GT-H / CS6 hood?

Edited by H0050, 18 November 2012 - 05:24 PM.

Harald #50

CSM 06H0050: Registered as a Shelby GT-H/SC
Black CS 69 w/ 255/45/18 & 285/40/18 BFG G-Force KDW
Lower Billet Grill
Air Bag Signed by Carroll Shelby, Amy Boylan, Gary Davis, Gary Patterson & Cleo Shelby
40th Anniversary Signature Floor Mats w/ Gold Stripes
Shelby GT Plus & Eradispeed 14" brakes & S/S brake lines
Sequential Tail lights
GTH Billet Fluid Caps
SAI installed polished Paxton SC # 0066 w/ GT 500 fuel pump
GT-H/SC side stripes
Shelby gauges & gauge pod
424RWHP 367 Torque
KR rear end expansion tank
2009 Shelby Bash top 20 winner
2011 Bash In & Out cruise recognition plaque
Painted over the top stripes
Terlingua Deep Draw Hood


The race is run, the flag unfurled, the champion now will rest.
God speed, Carroll Shelby, we will never forget you.
CARROLL H SHELBY

Jan. 11, 1923 – May 10, 2012


http://i414.photobuc...8/06h50/030.jpg
http://i414.photobuc...8/06h50/035.jpg
http://i414.photobuc...8/06h50/037.jpg

#7 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 18 November 2012 - 07:14 PM

View PostH0050, on 18 November 2012 - 05:20 PM, said:

Dan, looks good.  We are at about the same progresst my front and rear bumpers are off.  I am also painting with the textured black in the center as those shared on the Terlingua site.  Did you notice how much lighter the hood is compared to the GT-H / CS6 hood?

I really didn't pay attention to the weight difference Harald.  I was too damn excited to get the hood on to see it clear the S/C... :hysterical2:

It may take them an extra week to finish it, as this is a shortened week and the paint change we made, but that is fine with me and they have other projects going on at the same time too.

Dan
2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#8 OFFLINE   MY500SS

MY500SS

    Team Shelby Addict

  • Team Shelby Club Member
  • 17,609 posts
  • Joined 15-April 07
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:GT500 SuperSnake

Posted 19 November 2012 - 07:42 AM

Really looking forward to seeing the finished product..........gonna be sweet :happy feet:
Honored to have participated in the 2012 Shelby Run Europe.
2500 miles, 10 days, 8 countries.


Proud member of Team 40th - 07XL0273

2007 GT500SS CSM 07SS0134. Completed June 2008.
2007 GT50040th CSM 07XL0273. Completed August 2008.
1964 289 FIA Cobra CSX 7076. Completed December 2010.
1963 L76 Corvette.

Posted Image

#9 OFFLINE   mywickedshelby

mywickedshelby

    Cogito Ergo Zoom

  • Team Shelby Club Member
  • 34,728 posts
  • Joined 17-May 07
  • Gender:Male
  • Region:Northeast
  • Interests:Occassionally
  • Vehicle:Shelby GT

Posted 19 November 2012 - 08:06 AM

looking great so far......congrats to you....and welcome to the club!
2007 Black SGT. CSM #2502
Masterfully Modified at MacKenzie Mustang Supply in Palm Springs, California
Deep Draw Hood (clears my Whipple without lowering the engine) and Painted Stripes / August 2011
4.6 Aluminator built by L&M Race Engines, Hatboro, PA. February 2012, 700hp!
Shelby Run Europe 2012 Participant!
Posted ImagePosted ImagePosted ImagePosted ImagePosted Image[Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image

#10 OFFLINE   ilmor

ilmor

    ilmor

  • Team Shelby Club Member
  • 10,914 posts
  • Joined 04-May 07
  • Gender:Male
  • Region:Northeast
  • Interests:Shelby GT's (what else), Guitar, Camping in my RV, NASCAR, any other auto racing, autocross, car shows
  • Vehicle:Shelby GT

Posted 19 November 2012 - 09:21 AM

Nice
2007 Shelby GT CSM# 07SGT1917 - the "Garage Queen"

Performance White, Hurst 5-Speed, Premium Package



Shelby 4.6L Racing Valve Covers ,Shelby Turbo Mufflers, Shelby GT Brake Duct Kit, "S" snake faux gas cap, Carroll Shelby autographed dash, Improved Shelby GT hood scoop replaced by Tasca Mod Shop, Craig's Custom License Plate Bracket, Baer GT Rotors, Hawk HP Plus Pads, Stainless Steel Brake Lines, Hi Temp Brake Fluid, J&M Street/Race Extreme Joint Lower Control Arms, J&M Double Adjustable Panhard Rod (Street/Race) ...



2013 Mustang GT Premium - the "Daily Driver"

Black / Black & Glass Roof, 6-Speed SelectShift, Sync, NAV, Interior Upgrade.....





Posted Image

#11 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 21 November 2012 - 01:46 PM

Stopped by the shop today before the holiday, a little more progress!  The section that was hitting the IC tank and was modified is being glassed over.  The owner says the hood fits fine now and lines up perfectly. :yahoo:

He said the stripes will be removed Monday and hopefully in the booth for paint Friday next week. :rockon:

Posted Image

Posted Image

Posted Image

Posted Image

My holiday/weekend project is to clean the grille and replace the faded running horse emblem.

Posted Image

Posted Image


Have a Happy Thanksgiving everyone!!!
Dan

Edited by Blown Away, 21 November 2012 - 01:48 PM.

2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#12 OFFLINE   H0050

H0050

    H0050

  • Team Shelby Club Member
  • 3,400 posts
  • Joined 28-September 07
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT-H
Garage View Garage

Posted 21 November 2012 - 05:33 PM

Dan, looks good.  Great idea on the grill emblem as I have one also.  I also have to route my washer hose & install nozzles on the wipers.  Posted a few pictures on the GT-H site.

Happy Thanksgiving.
Harald #50

CSM 06H0050: Registered as a Shelby GT-H/SC
Black CS 69 w/ 255/45/18 & 285/40/18 BFG G-Force KDW
Lower Billet Grill
Air Bag Signed by Carroll Shelby, Amy Boylan, Gary Davis, Gary Patterson & Cleo Shelby
40th Anniversary Signature Floor Mats w/ Gold Stripes
Shelby GT Plus & Eradispeed 14" brakes & S/S brake lines
Sequential Tail lights
GTH Billet Fluid Caps
SAI installed polished Paxton SC # 0066 w/ GT 500 fuel pump
GT-H/SC side stripes
Shelby gauges & gauge pod
424RWHP 367 Torque
KR rear end expansion tank
2009 Shelby Bash top 20 winner
2011 Bash In & Out cruise recognition plaque
Painted over the top stripes
Terlingua Deep Draw Hood


The race is run, the flag unfurled, the champion now will rest.
God speed, Carroll Shelby, we will never forget you.
CARROLL H SHELBY

Jan. 11, 1923 – May 10, 2012


http://i414.photobuc...8/06h50/030.jpg
http://i414.photobuc...8/06h50/035.jpg
http://i414.photobuc...8/06h50/037.jpg

#13 OFFLINE   sgt1020

sgt1020

    Team Shelby Senior Member

  • Team Shelby Club Member
  • 712 posts
  • Joined 30-January 10
  • Gender:Male
  • Region:Northeast
  • Interests:Shelby's, Cars, and Photography
  • Vehicle:Shelby GT

Posted 24 November 2012 - 10:02 PM

Dan, nothing wrong with a little petunia ;)
Posted Image
07 Shelby GT
CSM: 07SGT1020
White/silver Stripes
Trans: Manual
-Shelby brake cooling duct bezels with fog lights
-Lower Billet Grill
-Painted Mirror covers
-Shelby Windshield Banner
-Sequential Turn Signals
-Shelby Billet Aluminum Pedals
-19X9.5 SVE Wheels
-Michelin Super Sports (275/35/19)
-Clear Front Turn Signals
-FRPP KR Axle Backs
-Amsoil 5w-30 Motor Oil
-Ford Racing Oil Filter
-J&M Billet Aluminum Lower Control Arms
-Griggs Racing Adjustable Aluminum Panhard Bar
-Shelby Signed Sun Visor (+100hp)
-Kooks 1 5/8" Longtube Headers w/ catted X-Pipe
-FRPP Intake Manifold
-FRPP 62mm Throttle Body
-FRPP Hot Rod Cams
-Steeda Carbon Fiber Intake Elbow
-Steeda Underdrive Pulleys
-GT500 Brembo Brakes
-Hawk HPS Brake Pads front and Rear
-3.73 Gears
-Shelby Valve Covers
-Shelby Autometer N/A Gauges and Gauge pod
-Dyno Tune
-Shelby (Fays2) Watts Link
-Shelby Transmission Cooler Scoop
-Koni Yellow Shocks
-Steeda Heavy Duty Strut Mounts

#14 OFFLINE   cobra567

cobra567

    Team Shelby New Member

  • Team Shelby Club Member
  • 183 posts
  • Joined 05-September 06
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:GT500

Posted 25 November 2012 - 08:33 AM

Looking good.  It's amazing how many new projects emerge when you change hoods.
My red Shelby on the right...Joe Gosinski's blue Shelby on the left. RIP Joe

07 GT500 - Red Coupe w White Stripes Picked up - August 10, 2006.

-VMP 2.3 TVS w Hi Flow elbow & interchangable pulley
-FRPP Twin 65 Throttle Body
-FRPP 373 Gears
-Ford Finned Aluminum Axel Cover
-Shelby KR 18" wheels
-2012 Recarro Seats
-Spec Twin SS Clutch
-KR Hood (real)
-Shelby Shifter
-JLT 127 CAI
-Tune from VMP
-Shelby Baer 6 Piston front brakes & Baer Eradispeed Rear rotors
-SAI Brake Cooling ducts
-1 Piece Alumn Drv Shft
-Chicane Tow Hook
-Chicane Brake Booster Brace
-Shelby Radiator and Heat Exchanger
-Shelby Black overflow tanks
-P321 graphite caps
-Borla Stinger Axel Back, Shelby KR H Pipe
-Steeda LCA,
-Shelby Kicker Premium Sound System
-CDC Sequencial turn signals
-Full mirror covers, Window Tint, ACC Cobra mats
-FRPP Springs
-MMS camber plates
-Bangastang Radiator Cover
-KR Axel reservoir
-MMS Adjustable Sway bar end links
-JLT Oil Seperator
-P321 Billet Coil covers

2007 Shelby SVT 4 - current, 2002 Lighting (sold), SVT 3 - 1998 Cobra Conv (Sold), SVT 2 - 1995 Cobra Removable Hardtop (sold), SVT 1 - 1994 Mustang Conv - (sold), SVT 5 - 1993 Cobra - current, 1967 Mustang Conv - current, 1967 GT350 -unrestored 26k orig miles

#15 OFFLINE   Larry T

Larry T

  • Team Shelby Club Member
  • 2,237 posts
  • Joined 28-April 06
  • Gender:Male
  • Region:Canada
  • Interests:UFC, Shelby's , SOA
  • Vehicle:Shelby GT-H

Posted 25 November 2012 - 03:15 PM

Looks awesome .... a great upgrade.
NO MANS LAND (1987)

[The car phone in the Porsche rings]
Benjy Taylor: Hello? No, Rick is not here. Who am I? The guy stealing Rick's car...



2006 SHELBY GT-H CSM06H281

#16 OFFLINE   richard m.switzer

richard m.switzer

    Terlingua Racing Team Member

  • Team Shelby Club Member
  • 1,708 posts
  • Joined 06-January 08
  • Gender:Male
  • Region:Mississippi Valley
  • Vehicle:Mustang

Posted 25 November 2012 - 04:54 PM

:salute: very nice .
000144-R1-02-1A.jpg
000144-R1-14-13A.jpg
000392-R1-07-6A.jpg
000144-R1-19-18A.jpg
Mods are ,,Ford Racing Parts , Shelby Performance Parts ,
ford racing fender decal 001.jpg,
Picture 011.jpg

41.gif

#17 OFFLINE   Jer

Jer

    Jer

  • Shelby Staff
  • 3,819 posts
  • Joined 22-December 07
  • Gender:Male
  • Region:Mountain
  • Interests:Music, computers, cars...
  • Vehicle:Shelby GT

Posted 26 November 2012 - 06:11 PM

Lookin' good!
Can't wait to see it done. You would think I would have mine done already, being at Shelby, but the shop's still way too busy for a side project!

BTW (and I may take some heat for this), I couldn't help noticing the split-bumper Camaro in the shop background. LOVE those cars.

Flame suit ON! LOL...


Jer
Shelby American
Vice President, Shelby Performance Parts
JerG@ShelbyAmerican.com


2007 SGT/SC # 446 - White, 5spd, Whipple 550 HO with Shelby/ReVan Racing/C&R radiator and heat exchanger upgrade, Lethal Performance intercooler tank, Shelby tensioner support brace, Ford Racing laser-etched blue cam covers, Dark Charcoal Gray Interior and dash (signed by Carroll), IUP, Active Anti-Theft, Pioneer AVIC-Z130BT with XM Radio, NAV, HD Radio, DVD video touchscreen, Bluetooth, rearview camera, etc... Infinity Reference speakers, Shelby Kicker door subwoofers, trunk sub, and 4.1 amp, Chrome 20X9 Shelby-logoed Razors (ET24) with Nitto 555s (255 front, 275 rear), Baer Extreme+ 6 piston brakes all around, A'te Super Blue brake fluid, Goodridge s/s brakelines, SLP Loudmouths, Aeroforce Terminator gauge, Shelby gauge pod, CS Supercharged faux gas cap logo, billet lower grille, updated 2008-style front grille mount, grille, Shelby billet hood pin kit and pony emblem, the latest hood scoop & stripes, Shelby floormats and trunk mat, CG-Lock seatbelts, Shelby GT engine cap set and period-correct "Shelby Automobiles" license plate frames, Moroso tanks, brake fluid reservoir, and fusebox cover, shorty antenna, Shelby billet fuel fill door, 3/4 window louvers, Shelby upper control arm and mount and lower control arms, CHE K-member brace w/ torque limiters, sequential taillights, Shelby billet Watt's link, Ford Racing 3.73:1 gearset, Shelby GT500KR diff cover, de-rusted and painted rear axle housing, Eaton True Trac limited-slip differential, Moser axles, Strange Engineering axle studs, full of Mobil 1 with Ford Racing filter. H3R HalGuard fire extinguisher with Shelby and Brey-Krause mounting. Of course I have lots and lots of Shelby doodads, knicknacks, merch, apparel, bling, and bric-a-brac. Many Shelby certificates and Monroney sticker shiny and intact. Fender SGT guitar. Tolerant wife.

Shelby Vegas Bash 2011 and 2012 Show Winner. No longer eligible for judging.

Lift #15
Technicians: John Orr/Randall LaViolette
2/13/2007 9:26:32 AM: Dash Badge Installed
2/13/2007 9:26:34 AM: Shelby Letters Installed
2/13/2007 9:26:35 AM: Side badges installed both sides

That's when it became OFFICIAL, in my opinion! A Shelby was born!
CUTE COINCIDENCE: The NEXT DAY, I was in Vegas getting married. True story.

UPDATE: In 2009, I drove cross-country with my wife from NY in the SGT and finally just MOVED here. I figured Vegas was lucky for me.
UPDATE: GT/SC upgrade completed at SAI on July 22, 2011.
Biggest UPDATE of ALL: Left Guitar Center and joined SA as Vice President, Shelby Performance Parts, August 2012.

#18 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 26 November 2012 - 08:37 PM

View PostJer, on 26 November 2012 - 06:11 PM, said:

Lookin' good!
Can't wait to see it done. You would think I would have mine done already, being at Shelby, but the shop's still way too busy for a side project!

BTW (and I may take some heat for this), I couldn't help noticing the split-bumper Camaro in the shop background. LOVE those cars.

Flame suit ON! LOL...


Jer

That's my friend Bill's.  He has a mechanic's shop near me and is building that as a project.  He's the one who recommended the paint shop to me.  Going tomorrow to check on the progress.

Dan
2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#19 OFFLINE   Blown Away

Blown Away

    Team Shelby Member

  • Team Shelby Club Member
  • 1,149 posts
  • Joined 02-February 09
  • Gender:Male
  • Region:Pacific Coast
  • Vehicle:Shelby GT

Posted 28 November 2012 - 12:53 AM

Tuesday's progress

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

A little filler had to be used on the new hood in the area Harald pointed out before.  The stripes should be painted on the roof today!!

And my busted driver's side driving light will be replaced while everything is off.

Dan

Edited by Blown Away, 28 November 2012 - 12:54 AM.

2007 Shelby GT #4257 -- White -- Automatic -- IUP -- Navigation System -- Ordered w/CS6 Hood, Lower Grille & Lights

Installed by Mackenzie's Mustang Supply
Whipple Polished HO Supercharger
1/2" Drop Lethal Performance Lowering Engine Mounts
Custom Blue Powder Coated Valve Covers
Shelby Gauge Pod and Gauges
Steeda Extreme Duty Billet Lower Control Arms
Adjustable Upper Control Arm
Maximum Motorsports Adjustable Panhard Bar
Painted Rear Axle - Member of the "clean butt club"
'08 window felt


Jon Lund Tune

"Shelby GT" Floor Mats, CDC Sequential Turn Signals, Shelby Billet Hood Pins, Signed Airbag Cover, Shelby Map Light Accent, Shelby GT Billet Engine Caps, Shelby Extreme Plus Front Brakes
Tinted Windows, Shorty Antennae, Clear Front Turn Signals, Ford Blue Painted Brake Calipers, Goodridge Stainless Steel Brake Lines,
Trunk Lid Liner, Billet Strut Caps, Billet Door Locks, Billet Coat Hook, Billet Cup Holder Trim, Billet Emergency Brake Handle, Third Brake light Trim ,
Quarter Light Trim, Tail Light Trim, Steeda 2 piece Billet Idler Pullies, FordFan1's Racing Tow Hook, GT500KR Axle Reservoir, RedLine Elite "Shelby" Hood Struts, Deep Draw Hood, Painted Stripes


SEMA 2010 Sponsored Items
TSW Cadwell Wheels, 20X8.5 Front, 20X10 Rear - BFG 20" KDW Tires 265/35 20 Front, 285/30 20 Rear - Katzkin "Black Widow" Interior - Moroso Aluminum Tanks - JBA Axle Back Exhaust w/4" Tips - JLT Performance Carbon Fiber Whipple Intake Tube - Maximum Motorsports Camber/Caster Plates - Tokico D-Spec Struts/Shocks - Lethal Performance Aluminum Whipple Intercooler Tank - Classic Design Concepts Dead Pedal - Drake Muscle Cars Under hood Fender & Hood Hardware - SilverHorse Racing Louvered 1/4 Windows BP Art & Design Car Show Stand - B&M Transmission Cooler


Posted Image


Posted Image

#20 OFFLINE   FordRocks1

FordRocks1

    CSM#0405

  • Members
  • PipPip
  • 3,005 posts
  • Joined 02-April 08
  • Gender:Male
  • Vehicle:Other

Posted 28 November 2012 - 05:01 AM

Great seeing yours getting painted the right way, removing panels and such, I've see many shops cut just corners and the results are just plain :censored: . Loving these progression pics, keep'em rolling in.

Our attitude toward life determines life's attitude towards us-Earl Nightingale





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users