13 tailight swap into 12
#1 OFFLINE
Posted 26 November 2012 - 10:26 AM
I have someone who wants to do this but he told me it cost like 1100 dollars or something to do it. I was wondering if this is right since I'm surprised if it cost that much why so many people have done it because usually people are scared to spend like 500 dollars on exterior parts let alone 1100.
Mods:
35% window tint
nav-tv rear view camera
Red line hood struts
Front splitter curb alert system
Super snake carbon fiber splitter
APR Performance carbon fiber mirror assembly
JLT CF resonator delete w/blue airaid Filter
Shelby transmission cooler scoope
BMR UCA with Mount, BMR adjustable panhard bar
Bob's billet LCA and bob's oil separator
FRPP springs
HRE p40 w/Michelin Super sport tires
Future mods going on the car soon: Shelby floor and trunk mat, custom made EPCO shifter knob
Mods undecided about:
Boss x brace, MGW shifter, Boss side exhaust, Corsa black diamond axleback, Lithium battery
#2 OFFLINE
Posted 26 November 2012 - 10:33 AM
svt13, on 26 November 2012 - 10:26 AM, said:
I have someone who wants to do this but he told me it cost like 1100 dollars or something to do it. I was wondering if this is right since I'm surprised if it cost that much why so many people have done it because usually people are scared to spend like 500 dollars on exterior parts let alone 1100.
I believe Amigo did it and it's in his thread.
You have to buy more than just the tail lights. You also have to get a '13 Mustang/GT500 rear bumper (to match the tail light shape) and a Boss 302 lower facia with single pipe openings vs the twin pipe opening on the GT500 and so it matches the '13 inset where the license plate sits.
He buys his parts from Tousley Ford.
Phill
Kona Blue w/White OTT Stripes and Red Accent Stripes
Electronics Package, HID's & Car Cover
CURRENT MODS: FRPP: Whipple 2.9L Polished Superchager w/Crusher Inlet & Cobra Jet dual 65mm Throttle Body - Ceramic Coated Shorty Headers - Ford Blue Cam Covers - Polished Billet COP & Oil filler cap covers - FR3 Handling Pack w/Tokico Struts/Shocks & Eibach Swaybars - Jounce Bumpers - 8.8" Low Profile Axle Girdle - 3" Front Brake Cooling Ducts - Vacuum/Boost Gauge~ MGW:Short Throw Shifter~ PST: 1-piece Carbon Fiber Driveshaft~ Revan Racing: C&R Radiator and Intercooler~ ROUSH: 3x Intercooler degas bottle - Side Splitters - Extreme Off-road exhaust - Adjustable Trailing Arms (LCA) - Adjustable 3rd Link (UCA) - Adjustable 3rd Link Bracket - AC Vent Pod Vac/Boost Gauge Mount~ SHELBY: SC Aux. Idler pulley - Oil Dipstick handle, MC, PS & WS Washer reservoir caps - 8-qt. Oil Pan - Subframe K-member - Tubular Front A-arms - 6S Extreme Front Brakes - KR Style Front Brake Duct Bezels - Anti bump-stear tie-rod ends - Race Style Swaybar Links - Adjustable Caster/Camber Plates - Adjustable Panhard Bar - Panhard Bar/Body Brace - KR Rear Axle Reservoir - Eradispeed Rear Brake Rotors & Caliper Relocation Brackets - 18" GT500KR Alcoa Dura-Bright Wheels & Goodyear KR Winged Boot F1 Supercar tires~
PURCHASED AND AWAITING INSTALLATION: Shelby/Baer Extreme Rear Brakes; Shelby/BMR Lower Control Arm Relocation Brackets, Shelby/Metco Fuel Rails, Shelby Alcoa 20" Dura-Bright Super Snake style wheels; NMB2 2-Stage WOT Box, Granatelli Motors Tire Fryer Line-lock, Raptor shift light, ZEX N2O kit, Ford Racing Lighted Sill Plates w/Ford Racing logo.
#3 OFFLINE
Posted 27 November 2012 - 03:25 AM
#4 OFFLINE
Posted 27 November 2012 - 12:57 PM
2010KonaBlueGT, on 26 November 2012 - 10:33 AM, said:
You have to buy more than just the tail lights. You also have to get a '13 Mustang/GT500 rear bumper (to match the tail light shape) and a Boss 302 lower facia with single pipe openings vs the twin pipe opening on the GT500 and so it matches the '13 inset where the license plate sits.
He buys his parts from Tousley Ford.
Phill
Good memory mi amigo Phil
2012 Shelby GT500 Super Snake - CSM 12SS0214 - Performance White, Black Stripes, Black Wheels
2007 Shelby GT - CSM 07SGT0874 - White, Silver Stripes, Grey Interior, Auto Transmission (1 of 48)
1989 Shelby Dakota #180 - Engine Serial Number KN652001809 - White, Black & Silver Stripes (1 of 500)
2003 Shelby Pagsta Mini Motorcycle - VIN 1J9RR11573C273523 (1 of 25) - Blue, Silver Tribal. Signed by Carroll Shelby
2011 Shelby Felt Bicycle - #SF134 (1 of 500) - White, Blue Stripes
"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users












