Jump to content





Photo

Rabbits Ate My Wiring Harness Heeeeelp

wiring

  • Please log in to reply
4 replies to this topic

#1 OFFLINE   bowtie350

bowtie350

    Team Shelby New Member

  • Members
  • Pip
  • 2 posts
  • Joined 19-March 15
  • Region:Pacific Northwest
  • Interests:anything auto related

Posted 19 March 2015 - 11:23 AM

So i'm working on an 87 CSX-T and most likely going to be doing a full restoration on this darn thing. However before i even start that process i need to get the harness issue handled first. i live in the country and rabbits have eaten the engine harness clean in half right at the connector at the firewall. Can anyone point me to a wiring diagram or other solution (i.e. where i can find a replacement)? i have looked on service info sites and even emailed the tech support department at Shelby and they had nothing to offer, even their techs had no clue where to look.



#2 OFFLINE   shelbymotorsports

shelbymotorsports

    SAI Registry Supervisor

  • Shelby Staff
  • 7,473 posts
  • Joined 12-November 07
  • Region:Decline

Posted 19 March 2015 - 11:56 AM

So i'm working on an 87 CSX-T and most likely going to be doing a full restoration on this darn thing. However before i even start that process i need to get the harness issue handled first. i live in the country and rabbits have eaten the engine harness clean in half right at the connector at the firewall. Can anyone point me to a wiring diagram or other solution (i.e. where i can find a replacement)? i have looked on service info sites and even emailed the tech support department at Shelby and they had nothing to offer, even their techs had no clue where to look.

No such car as a 1987 CSX-T. Do you have a 1987 CSX or a 1988 CSX-T?

 

Shelby Automobiles Inc, in Whittier California where these cars were built, closed up shop in 1990 so I'm not sure who you emailed.

 

Either way the wiring harness is from Chrysler (Dodge) and not Shelby. You'll need to contact Chrysler and the harness would be listed for either a 1987 Dodge Shadow ES or a 1988 Dodge Shadow ES depending on which car you have.

 

Steve


__________________________________________________

Register your Shelby at: Shelby American Registry

Order your SAI Registry Certificate at: Shelby Store

PM's turned OFF. Email me at: StevenT@Shelby.com

SAIRegistryCert.jpg


#3 OFFLINE   bowtie350

bowtie350

    Team Shelby New Member

  • Members
  • Pip
  • 2 posts
  • Joined 19-March 15
  • Region:Pacific Northwest
  • Interests:anything auto related

Posted 20 March 2015 - 02:28 AM

thanks that helps drasticly and it would be an 88 then as i know for a fact that its a csx-t, i just mis typed that



#4 OFFLINE   shelbymotorsports

shelbymotorsports

    SAI Registry Supervisor

  • Shelby Staff
  • 7,473 posts
  • Joined 12-November 07
  • Region:Decline

Posted 20 March 2015 - 05:58 AM

thanks that helps drasticly and it would be an 88 then as i know for a fact that its a csx-t, i just mis typed that

Ok. A 1988 Shekby CSX-T would use the exact same harness as a 1988 Dodge Shadow ES with a Turbo I drivetrain. I would be shocked if you could get one from Chrysler so the next best thing is to call junkyards asking for a 1988 Shadow ES with a Turbo I drivetrain. You don't want a harness from a naturally aspirated car.

 

Steve


__________________________________________________

Register your Shelby at: Shelby American Registry

Order your SAI Registry Certificate at: Shelby Store

PM's turned OFF. Email me at: StevenT@Shelby.com

SAIRegistryCert.jpg


#5 OFFLINE   cmcmotorworks

cmcmotorworks

    Team Shelby Member

  • Mountain Region
  • 1,674 posts
  • Joined 20-December 10
  • Region:Decline
  • Interests:None
Garage View Garage

Posted 20 March 2015 - 07:51 PM

Wascally Wabbits!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users