[frankieboo69]

sorry i know i'm in the wrong spot i'm from the SGT , one of my friends fell in love with my Shelby and then he seen the cs6 in my Shelby mag and wants to get one real bad !!!

i dont know that much about the CS6 so this will probably sound very stupid to some of you guys but can you purchase a CS6 from Shelby , or do you buy the V6 and have the mods put on by a certin shop , or any dealer ???? and how much do they run for the Turn1 and Turn2 ????

please help me so i can give my buddy the best advice and corect answers !!!!

THNX , !!!!!!!

[ShelbyPilot]

You can find the information about Turn 1 & Turn 2 in the winter catalog on page 24 & 25:

http://scottdrake.ne...g2007LO-RES.pdf

If all else fails there is a widely publicized CS8 in the Barrett Jackson preview guide.

[frankieboo69]

socaljafo, on Dec 6 2007, 01:00 AM, said:

You can find the information about Turn 1 & Turn 2 in the winter catalog on page 24 & 25:

http://scottdrake.ne...g2007LO-RES.pdf

If all else fails there is a widely publicized CS8 in the Barrett Jackson preview guide.

Thnx , socaljafo !!!!!!!

do you know if Shelby actually makes any of the CS6 or are they all the turn1 / turn2 kits ????

[GPStang06_merged]

frankieboo69, on Dec 7 2007, 08:52 PM, said:

Thnx , socaljafo !!!!!!!

do you know if Shelby actually makes any of the CS6 or are they all the turn1 / turn2 kits ????

They make the body parts and sell all the other parts seperate or as the "Turn Kits"

Example, the exhaust under the turn kit is JBA. The side scoops are from Xenon, and the suspension is Eibach I think. The brakes are Shelby but made by Baer.

[Paleoc]

frankieboo69, on Dec 7 2007, 08:52 PM, said:

Thnx , socaljafo !!!!!!!

do you know if Shelby actually makes any of the CS6 or are they all the turn1 / turn2 kits ????

They are all kits. Shelby does not make any CS6/8's. You can have the kit installed by an aftermarket installer or do it yourself. Paint and labor is not included in the price of the kit.

If you want a registered V6 Shelby, Shelby does (or will) build a Terlingua. See: http://www.shelbyaut.../news.asp?id=20 and http://www.shelbyaut...sp?car=TerGall2 and http://www.shelbyaut...asp?car=TerGall. You would have to contact them to see how that would be done.

[frankieboo69]

Paleoc, on Dec 8 2007, 10:11 AM, said:

They are all kits. Shelby does not make any CS6/8's. You can have the kit installed by an aftermarket installer or do it yourself. Paint and labor is not included in the price of the kit.

If you want a registered V6 Shelby, Shelby does (or will) build a Terlingua. See: http://www.shelbyaut.../news.asp?id=20 and http://www.shelbyaut...sp?car=TerGall2 and http://www.shelbyaut...asp?car=TerGall. You would have to contact them to see how that would be done.

THNX very much for all the info , you guys are the best !!!!!!!!!!!!!!