[badpuss]

Heres my 05 GT Paxton SC Mustang converted to a GT350 Tribute car. Current mods are a Paxton Novi 1200 (intercooler & smaller pully install to be finished in a couple days), S&W UCA and LCA's, Richmond 3.73 gears, Trickflow Dif girdle, BMR adjustable panhard, Steeda short shifter, FRPP Handeling Package, 20 inch BonSpeed rims, Bassani axle backs, TRCF #67 functional hood, 07 Cobra front fascia and custom GT350 badges.

This post has been edited by badpuss: 28 June 2007 - 10:18 AM

[GT500FLYBOY]

That is really sharp. Great work.

[Secondo]

Man that is nice!!

[Super Snake]

[LuckySnake]

badpuss, on Jun 25 2007, 02:04 PM, said:

Heres my 05 GT Paxton SC Mustang converted to a GT350 Tribute car. Current mods are a Paxton Novi 1200 (intercooler & smaller pully install to be finished in a couple days), S&W UCA and LCA's, Richmond 3.73 gears, Trickflow Dif girdle, BMR adjustable panhard, Steeda short shifter, FRPP Handeling Package, 20 inch BonSpeed rims, TRCF #67 functional hood, 07 Cobra front fascia and custom GT350 badges.

Very nice looking car, really like the hood allot. I would put the S H E L B Y across the rear deck lid. Let us know how she runs.

Edit: I would add the GT500 rear spoiler as well.

This post has been edited by Blayne9067: 25 June 2007 - 01:34 PM

[YZD263]

Nice work! That's a great looking car!

Have you had the opportunity to put it on the dyno so far? Please keep us posted.

[HSURB]

badpuss, on Jun 25 2007, 02:04 PM, said:

Heres my 05 GT Paxton SC Mustang converted to a GT350 Tribute car. Current mods are a Paxton Novi 1200 (intercooler & smaller pully install to be finished in a couple days), S&W UCA and LCA's, Richmond 3.73 gears, Trickflow Dif girdle, BMR adjustable panhard, Steeda short shifter, FRPP Handeling Package, 20 inch BonSpeed rims, TRCF #67 functional hood, 07 Cobra front fascia and custom GT350 badges.

Awesome. All that I can say is that car is one badpuss.

HSURB

[badpuss]

YZD263, on Jun 25 2007, 07:19 PM, said:

Nice work! That's a great looking car!

Have you had the opportunity to put it on the dyno so far? Please keep us posted.

I mounted the intercooler when I put the GT500 front fascia on but I'm just getting around to re-positioning and plumbing the supercharger, after that and the smaller pully I'll retune and dyno the car.

Thanks for everyones comments.
jb

[SpeedRacer]

Jeff,

She's gorgeous. Especially the hood.

All,

The pictures do not do this car justice! At every Show and Shine we go to to, Jeff has a long line...

Stuart

[docile_pony]

She is gorgeous, I have had the same idea bouncing around my skull for awhile(like so many other Shelby fans).
As for the rear deck have you looked into the Cerveni C wing ducktail, personally I think its the closest to the orignal ducktail's.

[crispy23c]

Beautiful job. Tastefully done. I really, really, reallllllllly love that hood and hope that SAI & Ford, in their infinite wisdom, build a GT 350 with a hood almost exactly like that. That is one sweet ride you have! Give us the numbers when you can, I'm sure it's pretty impressive!

[badpuss]

I added a SPORTWING GT500 spoiler to my S197 GT350

[crispy23c]

Verrrry nice.
Hey, by the way, did you cut the GT350 badge into the rear? The pic looks like that. If you did, nice attention to detail! If you didn't, it still looks sweet.

[badpuss]

crispy23c, on Jul 6 2007, 08:18 PM, said:

Verrrry nice.
Hey, by the way, did you cut the GT350 badge into the rear? The pic looks like that. If you did, nice attention to detail! If you didn't, it still looks sweet.

Thanks, yes some handy dremel work. I have some retro GT350 Cobra fender badges coming from Tony Branda to replace the GT fender Emblems then I'm done for awhile, that is unless I get what I want for my BonSpeed rims then I may buy some CS66 or Konig Beyond rims.

jb

[crispy23c]

badpuss, on Jul 6 2007, 10:26 PM, said:

Thanks, yes some handy dremel work. I have some retro GT350 Cobra fender badges coming from Tony Branda to replace the GT fender Emblems then I'm done for awhile, that is unless I get what I want for my BonSpeed rims then I may buy some CS66 or Konig Beyond rims.

jb

Very nice work with the dremel! Looks molded right in!!!
Both would look nice, but my preference would be the CS6 rims over the Beyond's 'fan blade' look. I think both would rock on your car, btw, but I love those CS6 rims! Keep us updated....I cannot wait for the GT350 to bow in. IMO, it's just a matter of time. Cars like yours make me want one even more!

This post has been edited by crispy23c: 06 July 2007 - 06:54 PM

[BossMan69]

Nicely done, badpuss

[gene64cobra]

HSURB, on Jun 25 2007, 06:37 PM, said:

Awesome. All that I can say is that car is one badpuss.

HSURB

trcf hood ??? i love it where do you get one.

[badpuss]

gene64cobra, on Jul 16 2007, 08:47 PM, said:

trcf hood ??? i love it where do you get one.

Heres the website and Mustang Fiberglass page, they make a #67 and #68 for the 07 GT500 and a #67 for all 05-07 S197 non-Gt500's

http://www.theracecarfactory.com

http://theracecarfac...fiberglass.html