Jump to content

SPP Keith

Shelby Staff
  • Content Count

    52
  • Joined

  • Last visited

About SPP Keith

  • Rank
    Team Shelby New Member

Recent Profile Visitors

270 profile views
  1. Hi MustBD2, SPP is not open on Sun, so I'm not sure whom you spoke with if you called in before this post. Please email me directly, keithc@shelby.com and I'll get you taken care of. Thanks-
  2. We can look at the coil covers, no problem and get some quotes going. Would you guys be okay with a billet, machined piece for this? Doing a full valve cover is pretty cost-prohibitive. We looked at some previously for the 5.4 and 4.6 and our cost was VERY high. They would've had to retail for over $1200 for the pair and I didn't think we'd sell through the 500 minimum order quantity we were quoted. Good news is I do have some new products on track for production next year that I know some of you are really going to like. Lots of in-house development and design is going on right now. Merry Christmas to all of you-
  3. What a great picture, Bill Thoughts and prayers with his family-
  4. Team, I appreciate constructive criticism and respect everyone's right to an opinion, however uninformed at times. Please note that unconstructive criticism that serves no purpose will be deleted. This is a privately owned forum and we all agreed to the same terms and conditions when we signed up. I will update this thread when contact information changes for my team. Thanks!
  5. Jerry, I did some digging and found some info on your request from Chris here. I'll ensure that Jason calls you today. In the future, please email me directly if you do not hear back from someone in a timely manner. I apologize for the delay. keithc@shelby.com
  6. Team, Jason was on a well deserved vacation last week and is back in the office today; available via both email and phone. I encourage anyone to email me directly if you feel your emails are going unanswered as opposed to posting on the forums. You'll find the repose time a lot faster. I've also added an additional crew member to the roster above and removed Brian Turner, as he no longer works with our company. Thanks-
  7. Sam, You can reach out to me at any time for any reason. I'm not on here often but have been involved with Shelby product development since 2007. If I don't know the answer, I usually know the person that does and I hate to hold up anyone's personal projects. Hope the install went smooth for you!
  8. Team, Just a quick note, as I've seen some posts lately where people are directing their customer service questions to the forums. We're not always on the forums to monitor customer service issues but I assure you, if you send an email in or call us during business hours, you will get someone on the phone and your question answered. My team is fantastic and cross-trained to ensure you are helped but please feel free to reach out to anyone below if you have a specific type of question. I can be reached almost anytime, keithc@Shelby.com Thanks! Daniel Velarde -Customer Service- danielv@Shelby.com Chris Ruby -Customer Service/Tech Support- chrisr@Shelby.com Jason Harlow -Shelby Performance Center/Warranty- jasonh@Shelby.com Jeremy Sparkman -Customer Service/TS Memberships- jeremys@Shelby.com
  9. Team, Were not always on the forums to monitor customer service issues but I assure you, if you send an email in or call us during business hours, you will get someone on the phone and you question answered. My team is fantastic and cross-trained to ensure you are helped but please feel free to reach out to anyone below if you have a specific type of question. I can be reached almost anytime, keithc@Shelby.com Thanks! Brian Turner -Shelby Performance Center/Tech Support- briant@Shelby.com Chris Ruby -Customer Service/Tech Support- chrisr@Shelby.com Jason Harlow -Customer Service- jasonh@Shelby.com Jeremy Sparkman -Customer Service/Warranty/TS Memberships- jeremys@Shelby.com
  10. 2007_Shelby_GT, You will need to modify the plate (slightly) to accommodate the caliper being larger than your factory GT unit. Although you wont have as much coverage on the 15" rotor, one of the more critical purposes of the kit is to cool the hub & bearing assembly (which, in turn, compounds the heat generated by the brakes). So the system will still be effective at speed. Please feel free to email me with further questions, keithc@shelby.com
  11. Mr. Hanley, On the triple discs systems, the front and rear discs are sprung and the center disc is rigid due to spatial limitations in the assembly. There simply isn't enough room to have all three sprung on our units. Please feel free to reach out to me directly with further questions. blackcad55, We do provide this installation service at our Las Vegas facility through our new SPC (Shelby Performance Center). Please email Brian Turner bturner@shelbyamerican.com for a quote and to set up and appointment. I can be reached with any further questions at keithc@shelbyamerican.com Thanks!
  12. Team, Weld shipped wheels out the last week of January directly to some customers and we started shipping them out last week from our facility. In fact, production shipments have already started to show up to stock up the assembly line for the 2015 Shelby GT. There are no warranty issues with these wheels. Thanks-
  13. I appreciate the feedback and it called to attention an area that needed to be addressed! We do realize there are still a few of these areas but they get less and less everyday; the links are already in the process of being removed and corrected. Should you find something else, feel free to give me a shout keithc@shelbyamerican.com Thanks!
  14. Was there an item, in particular, I can pass the instructions onto you for? I know we keep a backup pinned in this section (linked below). I'll have the site addressed. http://www.teamshelby.com/forums/index.php/topic/81626-spp-installation-directions/ Thanks-
  15. Hello Team, It is with absolute pleasure that I get to announce the winner of this raffle: Team Shelby club member John Druley of McAllen, Texas! We randomized the raffle list digitally several times and then had our COO pick a random number and matched it against the spreadsheet. John and a guest will be behind the wheel of our fantastic new program vehicle in just over two weeks from now! Having personally ridden as passenger in this car on-track, I can tell you they're in for quite the ride as drivers! Please join me in congratulating John!
×
×
  • Create New...