Jump to content

COBRA SCOTTY

Members
  • Content Count

    2,267
  • Joined

  • Last visited

Everything posted by COBRA SCOTTY

  1. Hello Forum Members and Guests, I wanted to post this link that allows you to track your Mustang build and print your window sticker. www.cotus.ford.com
  2. Hello Forums Members and Guests, I wanted to post this link that allows you to track your Mustang build and get your window sticker !!! www.cotus.ford.com
  3. Could you please post some pics, as I might be interested. Thank you !!!
  4. +1 ON GETTING SOME NO CATS !!! HOWEVER, IF YOU ARE CONCERNED ABOUT NOT GETTING LOUDER, BUT GAIN 15-20 AT THE REAR WHEELS YOU CAN CONTACT LETHAL PERFORMANCE, AND GET THEIR BRAND 2.5 INCH X-PIPE WITH MAGNAFLOW HIGHFLOW SPUN CATS. THESE CATS FLOW EXTREMELY WELL, AND IS AS CLOSE TO HAVING A NO CAT X-PIPE WITH OUT THE LOUDNESS THAT IS NORMAL ON A NO CAT X-PIPE. MAKE SURE YOU GET LETHALS OWN BRAND AND NOT THE MAGNAFLOW X-PIPE. LETHALS PRODUCT IS STAINLESS, USES THE SAME HIGHFLOW MAGANFLOW CATS AT HALF THE PRICE. ADDITIONALLY, UNLESS YOU ARE GOING OVER 700 RWHP FORGET ABOUT SHORT OR LONG TUBE HEADERS ESPECIALLY IF YOU WANT TO KEEP THE EXHAUST DECIBELS DOWN SO YOU CAN HEAR YOUR WIFE OR THE NEXT HOUR AFTER YOU TAKE IT OUT FOR A DRIVE.
  5. Documentation is everything and I do not see any evidence of that ?
  6. I would suggest that you try Aco Hardware they offer a very nice all steel torque wrench that is about $ 49.99 and does not have the cheap plastic on it, and mine has lasted 8 yrs without any calibration issues. I recently purchased one for a good friend of mine that got some new wheels and tires for his Jeep Wrangler. As far as the torque setting for Mustangs you would set your wrench to 99 FT. LBS. of torque and use a star pattern to tighten them down. I would then check your lugs nuts torque after you have driven 30 mile on your wheels and tires, and check them one additional time after you drive another 35-40 miles. Best of luck !!! Scotty G.
  7. Never use a torque wrench to remove lugs nuts for it will damage the torque wrench by throwing off the calibration and you willl have to have your torque wrench re-calibrated. Use a regular socket wrench OR BREAKER BAR and follow MMcGuirk's instructions for they are correct. Torque wrenches should only be used for the tightening of nuts or in this case lugs nuts. http://www.ehow.com/...wrench-use.html
  8. How about a road course day at Waterford Hills ? :happy feet: :happy feet: :happy feet: :happy feet:
  9. I already have an agreement in place with the buyers of most of my past cars that they will sell them back to me 1st. B)
  10. Congrats Jeff. the car looks beautiful !!! I sold three of my four Shelby's and it was hard each time. But just like you I am going to feel alot better when my 2013 School Bus Yellow (aka) Grabber Orange Boss Laguna Seca arrives at my local dealer on Tuesday. :happy feet: :happy feet: :happy feet:
  11. HI SGT1197 I JUST TRIED TO PM YOU AND IT SAID YOU ARE NOT ABLE TO RECIEVE MESSAGES ? Just give me a call SGT1197, and we can talk about a fair price. # 248-613-3520 Respectfully, Scotty G.
  12. Way to go Van !!! Hopefullly you will be able to remove your throttle pedal and foot from being embedded into the floor pan and toe plate. Congrats Van !!!!!!!! Scotty G
  13. Scotty here, I HAVE A 2008 SHELBY GT-C / SC WHICH WAS THE 1ST 2008 SHELBY GT CONVERTED INTO THE GT / SC WITH THE WHIPPLE 550 KIT BY SHELBY IN LAS VEGAS AND IS ONE OF ONE AND HAS JUST ABOUT EVERY UP-GRADE SAI OFFERED AT THE TIME. IT HAS ABOUT 5,400 MILES ON IT AND IS IN PRISTINE CONDITION AND HAS BEEN STORED IN A CLIMATE CONTROLLED ENVIRONMENT AND NEVER IN RAIN OR SNOW. MY CAR WAS BUILT TO MY SPECIFICATIONS PRIOR TO THE OFFICIAL LAUNCH OF THE GT / SC PROGRAM AND HAVE WRITTEN DOCUMENTATION FROM SHELBY / BUD MAHONEY TO PROVE THIS. ADDDITIONALLY, I HAVE NOT PUT IT UP FOR SALE YET SO IF YOU ARE INTERESTED AND WANT PICTURES YOU CAN CALL MY CELL # 248-613-3520 AT FORD MOTOR CO. ALSO IF YOU READ MY SIGNATURE IT HAS MOST OF MY MODS LISTED FROM SHELBY , BUT THERE ARE A COUPLE ADDITIONAL ONES. RESPECTFULLY, SCOTTY G. HERE'S SOME PICTURES FOR NOW
  14. That is funny as hell ; Randy !!! I am also sure you heard them saying " We need more beers & pass that doobie and stop rubbing up against the car "
  15. Them there brakes sure look sum good Mr. Tom !!! Scotty
  16. Awesome news Rob !!! And may peace be with you and your family, especially Chris. My 21 year ols son had similar problems in the past and had to rethink where his life was going. Now he has graduated from Technical school and is making 55K. It is very tough these days to be a good parent with so much temptation around are children. B.O.L. and congrats on Chris's determination to make the right changes in his life. :happy feet: Scotty
  17. Awesome news Rob !!! And may peace be with you and your family, especially Chris. My 21 year old son had similar problems in the past and had to rethink where his life was going. Now he has graduated from Technical school and is making 55K. It is very tough these days to be a good parent with so much temptation around are children. B.O.L. and congrats on Chris's determination to make the right changes in his life. :happy feet: Scotty
  18. + 1 ON THAT ccs17578 :happy feet: :happy feet: :happy feet:
  19. My plates are riveted also , but no signs of rust , Scotty
  20. VERY NICE RUN FOR YOUR 1ST TIME OUT AND THE DRAG RADIALS AND OTHER BOLT-ON WILL ONLY HELP MAKE THE CAR MORE ENJOYABLE AND CONSISTANT. THERE IS ALOT OF GREAT INFORMATION ON THIS SITE TO MAKE YOUR CAR RUN IN THE 10"S IF YOU CHOOSE TO. B.O.L SCOTTY G.
  21. " LARRY FOR PRESIDENT " WERE CAN I MAIL MY CAMPAIN FUNDS ? ( P.S ) I KNEW THERE WAS A REASON WHY I GAVE YOU SUCH A GREAT DEAL ON MY SGT WHEELS AND TIRES. SCOTTY G.
  22. YEP THAT'S MATT'S CELL NUMBER HE WILL BE ABLE TO HELP YOU OUT , AND I WILL SEE YOU ALL IN THE SNAKE PIT. :happy feet: SCOTTY G.
  23. How much for the seats if you do not mind me asking and where can they be purchased ? Thanks in advance for yor response. Scotty G.
  24. Hi Madlock, Scotty here, I have a cell number for Matt S. One of the head organizer.So if you can wait I will Pm you later this afernoon with his contact info when I get a chance to get it from my Corporate office. Scotty G.
×
×
  • Create New...