Jump to content

dthamiltonhpmd

Pacific Northwest Region
  • Content Count

    98
  • Joined

  • Last visited

Everything posted by dthamiltonhpmd

  1. I don't need all 6 wheels, but if you do decide to separate I would be interested in 2 of them, 1-20x9 and 1-20x10!
  2. I would be interested in 1 white windshield banner! Don Hamilton
  3. "SOLD" This is a originally signed leather jack, with "Certification of Authenticity #12349" and is size XXL, never really worn. I sent this jacket to the Carroll Shelby Foundation and was signed by Carroll on May 25, 2010 as shown in the attached pictures. I am asking $225 plus the cost of shipping. I will attached pictures as shown as I can figure out how to attached the pictures, in the mean time please PM me and I will forward pictures. I have also list the jacket with pictures on eBay https://www.ebay.com/itm/233031577349 Don Hamilton
  4. have a 2007 GT500 that has the Borla touring exhaust. I added Kooks long tube headers a while back and don't really care for how loud it is when the RPMs get much above about 2200. Any suggestions for calming the sound down a bit?
  5. Brain: I'm about 15 miles east of Oregon City off of Highway 213 Don
  6. Brian: I do not do Facebook for multiple reasons, so if you could post events here on this forum it would be great as I do visit this site regularly. Its great to see a new director for this region, one that is more active! Don
  7. So I have a 2007 that has several modifications including the long tube headers with the Borla touring exhaust, the Borla exhaust that used to be installed on the SS cars. I have not noticed any "Drone" in the passenger compartment( with top up), or very little, however, you can definitely hear the exhaust from behind the car. The installation of the headers definitely increased the loudness of the exhaust over just having the stock exhaust manifolds with the Borla exhaust.
  8. So a great resource in the Portland area is the Fox Shop. Call Jim a 503-358-8656. I had him switch out the rearend gears in my GT500 and did a great job, (I also have had him complete other tasks on the car as well.)
  9. I want to give a big shout-out to the Fox Shoppe in Portland, Oregon. Jim installed a new clutch, MGW shifter, one piece drive shaft and Kooks headers with Catted X-pipe on my 2007 GT500. I have had Jim complete other modifications on the car before with the same outstanding excellent result. If anyone in the Portland-Vancouver area has a need for a shop with a guy who knows these cars, and any other Mustang, this is the place, "The Fox Shoppe" in Portland! Don Hamilton
  10. I installed new LCR's with the relocation brackets and it really made the car set down and grab the road a lot better!
  11. So I think this is a great idea! Is this type of thing difficult to set-up, I would like to get one going for the PNW Region! Any help would be great!
  12. John: I called SPP the other day about some parts and asked if they had any Pacific Northwest Region windshield banners, I was told that they only had the plain team Shelby banners without any particular region and again stated that they would only be available through the regional director. Do you have any progress on these banners or is my only choice a team Shelby banner without any region? Don
  13. Jeff: I have been trying to get one of these banners for way over a year now for the Pacific Northwest Region. I have contacted our local guy, John Farmer a couple of times with littler or no response. Is there some way I can get the graphics for one of your banners and then I can get the Pacific Northwest Region inserted where yours says Mountain Region, or maybe even buy one of your banners so I can have it re-duplicated with the region! Any help would be greatly appreciated!!! Thanks Don
  14. So did you purchase the 15" rotor upgrade package through Shelby or Baer? Don
  15. I have one 20x9 and one 2x10 Alcoa 50 year wheels, brand new in the original boxes for sale. I bought a whole set of theses wheels to have a spare front and rear and do not need theses other two wheels, and would like to recoup some of the money I have invested. I am asking $2200, or best acceptable offer for the pair of wheels plus the actual shipping costs. Don't hesitate to contact me with any questions. E-Mail: dthamiltonhpmd@cs.com
  16. John Do you have the artwork for the banners, a PDF with the required fonts? Like I stated before my wife was in the printing business for many years and can most likely get them made! If you don't have the artwork, do can you get it from another region and we can substitute the region information as required, just need the measurements, fonts etc Don
  17. John: Any progress on the windshield banners, good driving weahter is getting closer! Don
  18. Thanks Frank for posting the link! I'm in!
  19. When I replaced mine It was fairly difficult. When I finally got it out the issue was Ford installed the bolt with a large amount of rubberized sealant type material that really increased the torque required to break that stuff free. I was able, with some difficulty to reach in around the bolt head somewhat and try to cut some of the rubber sealant material away. I too tried to use an impact wrench, however my impact was too large to fit without removing the raditor, I caulked all my wheels, set the brake and had the car in 4th gear using a 3 foot breaker bar!
  20. So will the banner state Pacific Region or Pacific Northwest Region, since I'm in the pacific northwest that the banner I am looking for!
  21. Has there been any progress on the TS Pacific Region windshield banners?
  22. 3ponies! The Shelby gauge pod set you have will be great! I installed the same unit about a year ago and its great! The pod comes with white lites in the gauges, you might want to consider a different color of lites before you install the pod, however they can be changed after installation too. I changed my lites out with a blue LEDs which Summit Racing carrys, in green and red also. They are a little spendly at $12 each but look very nice.
  23. Well I have Haggerty for my 07 GT500 and it not too expensive. The annual policy is about $1050 with stated value of $56k.
×
×
  • Create New...