Jump to content

BadTony

Members
  • Content Count

    1,422
  • Joined

  • Last visited

Everything posted by BadTony

  1. Confirmed that they are in fact Forgiato GTR's. Went to a dealer here in Portland yesterday. Priced at $6400 for the staggered set. Unfortunately, way way overpriced IMO. Very cool looking though
  2. Looks like they are Forgiato GTR special build... Priced in the $5k-ish ballpark.
  3. Ok, here's another cool set of wheels on a Shelby that I really like but can't figure out who makes them. Anyone help identify the manufacturer & model of these?? Thanks!!
  4. Thanks for restating my question more eloquently ;-)
  5. Best pics straight from the source http://iceninegroup.net/2013/01/13/carroll-shelby-tribute/
  6. Yeah , I posted 2x and then realized that these are the same (or very similar) wheels on both cars. My bad Anyhow.. I did reach out to Shelby American. They didn't know about the wheel manufacturer but did state it was IceNine Group that built the Shelby tribute car. I also contacted both IceNine and Modulare but haven't had any return communication from either party as of yet. I would like to think that since the Shelby Tribute Car was built in 2012, that there would be some verbiage or discussion specifically about these wheels online somewhere. So far I haven't come across it.
  7. Need some help identifying the model numbers of the wheels in the attached pic? Where to get them? Can anyone supply a link?
  8. Can you be a bit more specific? Share a link, model #, or vendor? Thanks!
  9. Who manufactures these wheels? Model or part #?
  10. I ended up going with the RXT. However, I was recently speaking with the guys down at All Ford & Blue Oval about changing the 'slave cylinder' with the change of the clutch? what does this mean? Is there a recommended part# Ford racing, McLeod, or other? Can someone speak to this? What are your thoughts?
  11. coincidentally my sister lives in Yelm and her hubby works for General Dynamics at FT. Lewis. Our deepest condolences and peace go out to Mark , Barbie and their families. It's very unfortunate that peace must come at such a high price. God bless the armed forces and what they do everyday to keep us free and safe. tDUBw
  12. 2 hot dogs or 2 hamburgers will be suffice + 3 or 4 Arizona diet green tea if you please
  13. Hi Rob Julie and I are planning on attending again this year. 07 Vista Blue w/white badtony
  14. Badtony Blue w/white Stripes 2007 GT500 Sounds fun! Julie & I will plan to be there If you need some volunteers for setting up etc.. Let me know.
  15. sooooo... are we talking about this problem of chatter or what feels like the shakes as still occurring after all the TSB repairs have been completed ? And if so , is Ford again saying this is 'norml'
  16. 21 lbs of boost - man thats enough to really jump up off the line compared to stocker boost #s That's really got to pull especially in the lower torque sections of the overall power band.
  17. Talking from experience, I'd personally go with Diversified if you have a choice. Their pricing is direct to you an no middleman. It's where many dealers order their addon/replacement parts from. They have much of FRPP 's catalog included in their ordering toolset. Part pricing is usually lower than street pricing, and with a little finnese on the phone, you make be able to have the rep taking your order even do better pricing than regular street pricing. These guys are also very knowledgeable about our beloved GT500s, Shelbys, and the rest of the upgrades available for Mustangs or SVT products for that matter.
  18. Has anyone here done this conversion yet? What type of results did you yield? Does the 10% in the product name mean that you will get 50 additional RWHP (or more if you are starting with more than 500 RWHP)? http://www.innovatorswest.com/store/index....mp;productId=45 will it need an additional belt tensioner? The Innovators West product coming in at $700 seems a bit spendy ..anyone have any thoughts on this? (why this is or where to get this product at a deep discount?)
  19. didn't you already have a spare chin spoiler just laying around the garage just in case? heck...your scuffed one probably is in better shape than my scratched up one. hmmm
  20. I am a computer guy with both sales and engineering experience. I am looking to get back into the workforce hopefully utilizing these strengths.
  21. when I was in LV last week, I stopped by CS shop. The had a SS in the showroom. I noticed what looked to be something like a Hurst chrome shifter and white cue ball looking knob. very clean and old school look. What make and part # did I see? What parts are the guys at Shelbyville using for the shifter kit (say without the lower linkages)?
  22. I am on my second clutch & throwout bearing assy. When these parts were replaced before, they also resurfaced my original flywheel. I currently have a tad over 12k miles. I have always had the hissing noise noise with clutch depressed. I had previously dealt with Bill W. Who now should be contacted? Last time , I had my repair completed within 48hrs. I would like to repeat this process if possible.
  23. hmm...this widening process makes me wonder... why is it that SAI can't just simply change the design ( or add a new design to their parts # list) and have Alcoa (or whoever manufactures the wheels for them) make the wheels wider to begin with? Thus not having to have folks pay an additional fee which will probably be double or more than the original price of the wheel + shipping??
  24. please add badtony & julie to the list. we had such a good time, I'll be on time this year ;-0
×
×
  • Create New...