Jump to content
Sign in to follow this  
Tonyjp

Stripe kit

Recommended Posts

Who makes the stripe kits for our cars?  What are my options for getting one. I need the metallic blue. Thanks 

ABCB8383-A74B-44C0-A454-6FB02DFEA85C.jpeg

Share this post


Link to post
Share on other sites

I think you will be able to order the replacement stripes directly from Shelby in Vegas.

I'm sure Steve will chime in on the contact info.

Share this post


Link to post
Share on other sites

Yep, they were a Shelby factory install. It's been a while since that iteration has been made so might be a tough find. If you're planning on keeping the car, I'd suggest getting them painted on and never have to worry about it again. The color is Guardsman Blue.

Share this post


Link to post
Share on other sites
On 3/18/2019 at 7:02 PM, Tonyjp said:

Who makes the stripe kits for our cars?  What are my options for getting one. I need the metallic blue. Thanks 

 

Available by calling SPP at 702-405-3500

 

Steve

Share this post


Link to post
Share on other sites

Thanks.  I will get one ordered. Mine has turned brown in some areas. Less than. 8000 miles on the car and always inside. I hope it won’t happen with a new set. 

 

Share this post


Link to post
Share on other sites
On 3/20/2019 at 7:25 PM, Tonyjp said:

Thanks.  I will get one ordered. Mine has turned brown in some areas. Less than. 8000 miles on the car and always inside. I hope it won’t happen with a new set. 

 

Stripes that have brown discoloring is normally caused by UV rays so the car must have spent some time outdoors. It appears your GT350 was built for Galpin Ford so who knows how long it sat in the Southern California sun and was at the mercy of the power washers that dealerships use. Also metallic colors are notoriously difficult especially on the horizontal surfaces. Most likely you will have better luck with the new stripes as you will have control from day one on how they are treated.

In regards to your question on the lighted sill plates, best to ask SPP if there is any chance they can help yo locate a set.

Steve

 

Share this post


Link to post
Share on other sites

Steve. Is there anyway we can get the stripe template files from Shelby. I am thinking about getting reverse vinyl cut so I can have the stripes painted on. Thanks 

Share this post


Link to post
Share on other sites
13 hours ago, Tonyjp said:

Steve. Is there anyway we can get the stripe template files from Shelby. I am thinking about getting reverse vinyl cut so I can have the stripes painted on. Thanks 

I can not speak for SPP but I highly doubt your request would be granted by SAI. A definite answer would need to come from SPP.

Steven

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...